S05A30 THRU S05A60 SCHOTTKY BARRIER RECTIFIERS Reverse Voltage – 30 to 60 Volts Forward Current – 10.0 Amperes TO-220AC 3.91 DIA 3.74 MAX10.54 Features • Plastic package carries Underwriters Laboratory Flammability Classification 94V-0 • Construction utilizes void-free molded plastic technique • Low reverse leakage • High forward surge current capability • High temperature soldering guaranteed: 250℃,0.25”(6.35mm) from case for 10 seconds 4.70 4.44 1.27 1.14 2.87 2.62 3.68 3.43 10.41 9.91 PIN 1 16.13 15.87 2 14.2 13.4 8.89 8.38 29.16 28.40 4.05 3.55 2.79 2.54 0.94 0.68 Mechanical Data • Case: Molded plastic body, TO-220AC • Terminals: leads solderable per MIL-STD-750, method 2026 • Polarity: As marked • Mounting Position: Any 2.67 2.41 5.20 4.95 14.22 13.46 0.58 0.35 PIN 1 PIN 2 CASE Dimensions in mm Absolute Maximum Ratings and Characteristics Ratings at 25℃ ambient temperature unless otherwise specified. Single phase half-wave 60Hz, resistive or inductive load. for capacitive load current derate by 20%. Symbols S05A30 S05A40 S05A45 S05A50 S05A60 Units Maximum repetitive peak reverse voltage VRRM 30 40 45 50 60 V Maximum RMS voltage VRMS 21 28 32 35 42 V Maximum DC blocking voltage VDC 30 40 45 50 60 V Maximum average forward rectified current I(AV) 10 A Peak forward surge current 8.3mS single half sine-wave superimposed on rated load (JEDEC method) IFSM 125 A Maximum instantaneous forward voltage at 5.0A Maximum DC reverse current TA = 25℃ at rated DC blocking voltage TA =100℃ VF 0.55 IR 0.65 1.0 V mA 30.0 Typical junction capacitance (Note 1) CJ 550 pF Typical thermal resistance (Note 2) RJC 3.0 ℃/W Operating junction temperature range TJ -65 to +125 ℃ storage temperature range TS -65 to +150 ℃ Notes: (1) Measured at 1MHZ and applied reverse voltage of 4.0V D.C . (2) Thermal resistance from Junction to case. SEMTECH ELECTRONICS LTD. ® (Subsidiary of Semtech International Holdings Limited, acompany listed on the Hong Kong Stock Exchange, Stock Code: 724) Dated :18/12/2003 S05A30 THRU S05A60 Fig.2-Maximum Non-repetitive Peak Forward Surge Current Fig. 1- Forward Current Derating Curve Peak Forward Surge Current, Amperes Average Forward Rectified Current, Amperes 5 125 4 Single Phase Half Wave 60Hz Resistive or Inductive Load 3 2 1 0 0 25 50 75 100 125 150 75 50 25 175 0 Fig. 3-Typical Instantaneous Forward Characteristics 10 TJ=25°C Pulse Width=300 s 1% Duty Cycle 1 0.1 S05A30-S05A45 --- S05A50-S05A60 0.01 0.2 0.4 0.6 0.8 1.0 1.1 10 TJ=100°C 1 TJ=75°C 0.1 0.01 0.001 1.0 10 Reverse Voltage, Volts 100 Transient Thermal Impedance,°c/w Junction Capacitance, pF TJ=25°C 200 20 0.1 100 TJ=25°C 0 20 40 60 80 100 Percent of Peak Reverse Voltage,% Fig. 5- Typical Junction Capacitance 2000 10 Number of Cycles At 60 Hz 100 Instantaneous Forward Voltage,Volts 4000 1 Fig. 4- Typical Reverse Characteristics Instantaneous Reverse Current, Milliamperes Instantaneous Forward Current, Amperes Ambient Temperature,°C 50 8.3ms single half sinewave (JEDEC method) 100 Fig. 6- Typical Transient Thermal Impedance 100 10 1 0.1 0.01 0.1 1.0 10 t, Pulse Duration, sec. SEMTECH ELECTRONICS LTD. ® (Subsidiary of Semtech International Holdings Limited, acompany listed on the Hong Kong Stock Exchange, Stock Code: 724) Dated :18/12/2003 100