2A01 THRU 2A07 GENERAL PURPOSE PLASTIC RECTIFIERS Reverse Voltage – 50 to 1000 Volts Forward Current – 2.0 Amperes Features • Diffused junction • High current capability and low forward voltage drop • Surge overload rating to 70A peak Mechanical Data • Case: Molded plastic • Terminates: Plated leads solderable per MIL-STD-202, Method 208 • Polarity: Cathode band • Mounting position: Any • Marking: Type number Absolute Maximum Ratings and Characteristics Ratings at 250C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Symbols 2A01 2A02 2A03 2A04 2A05 2A06 2A07 Units Maximum peak repetitive reverse voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum working peak reverse voltage VRWM 50 100 200 400 600 800 1000 Volts VR 50 100 200 400 600 800 1000 Volts VR(RMS) 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage Maximum RMS reverse voltage Maximum average rectified output current C (1) @TA=55 IO 2 Amps Non-repetitive peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) IFSM 70 Amps Maximum forward voltage @ IF= 2A VFM 1.1 Volts Maximum peak reverse current at rated DC blocking voltage @TA = 25 OC O @TA = 100 C IRM 5 50 µA 2 It 17.5 A2s CJ 15 pF RθJA 60 K/W TJ, TS -65 to+150 O 2 I t rating for fusing (t<8.3ms) Typical junction capacitance (2) Typical thermal resistance junction to ambient Operating and Storage temperature range (1) µA O Notes: 1.Leads maintained at ambient temperature at a distance of 9.5mm from the case. 2. Measured at 1MHz and applied reverse voltage of 4V DC SEMTECH ELECTRONICS LTD. ® (Subsidiary of Semtech International Holdings Limited, acompany listed on the Hong Kong Stock Exchange, Stock Code: 724) Dated : 20/06/2003 C 2.5 Single phase half wave 60 Hz resistive or inductive load 9.5mm lead lengths 2.0 1.5 1.0 0.5 0 25 50 75 100 125 150 175 200 10 I F , INSTANTANEOUS FORWARD CURRENT (A) Io [AV] , AVERAGE FORWARD RECTIFIED CURRENT (A) 2A01 THRU 2A07 1.0 0.1 Tj=25o C Pulse Width=300 s 0.01 0 TA, AMBIENT TEMPERATURE (o C) 0.8 100 f=1MHz Tj =25o C CJ , CAPACITANCE (pF) 60 45 30 15 8.3ms Single Half Sine-Wave JEDEC Mathod 1 10 1.6 Fig.2 Typical Forward Characteristics 75 0 1.2 VF , INSTANTANEOUS FORWARD VOLTAGE (V) Fig.1 Forward Current Derating Curve I FSM , PEAK FORWARD SURGE CURRENT (A) 0.4 10 1.0 100 NUMBER OF CYCLES AT 60 Hz 1 10 100 VR , REVERSE VOLTAGE (V) Fig.4 Typical Junction Capacitance Fig.3 Max Non-Repetitive Peak Forward Surge Current SEMTECH ELECTRONICS LTD. ® (Subsidiary of Semtech International Holdings Limited, acompany listed on the Hong Kong Stock Exchange, Stock Code: 724) Dated : 20/06/2003