SB 1520S ... SB 15100S Type Axial Lead Diode Schottky barrier rectifier diodes Forward Current: 15 A Reverse Voltage: 20 to 100 V SB 1520S ... SB 15100S Repetitive peak reverse voltage Surge peak reverse voltage Max. reverse recovery time Max. forward voltage Max. forward voltage VRRM V VRSM V trr1) ns VF2) V VF3) V SB 1520S 20 20 - 0,43 0,52 SB 1530S 30 30 - 0,43 0,52 SB 1540S 40 40 - 0,43 0,52 SB 1545S 45 45 - 0,43 0,52 SB 1550S 50 50 - 0,6 - SB 1560S 60 60 - 0,6 - SB 1590S 90 90 - 0,74 - SB 15100S 100 100 - 0,74 - Absolute Maximum Ratings Symbol • Max. solder temperature: 260°C • Plastic material has UL classification 94V-0 • Electrostatic discharge immunity test IEC 1000-4-2 (C=150 pF, R=150 Ohm): voltage class 20 kV Typical Applications* • Designed as Bypass Diodes for Solar Panels, protection application Mechanical Data • Plastic case: 5,4 x 7,5 [mm] • Weight approx.: 1,4 g • Terminals: plated terminals solderable per MIL-STD-750 • Mounting position: any • Standard packaging: 1250 pieces per ammo Footnotes 1) IF = - A, IR = - A, IRR = - A IF = 5 A, Tj = 25 °C 3) IF = 15 A, Tj = 25 °C 4) Valid, if leads are kept at TA at a distance of 10 mm from case 5) Max. junction temperature Tj ≤200 °C in bypass mode / DC forward mode 6) Thermal resistance from junction to lead/ terminal at distance 0 mm from case 2) Values Unit R-load, 4), Ta = 50 °C 15 A IFRM f > 15 Hz, 4) 60 A IFSM half sinus-wave Ta = 25 °C 320 A IFAV Features Conditions Ta = 25 °C, unless otherwise specified i2t Ta = 25 °C tp = 10 ms tp = 8.3 ms A tp = 10 ms 512 A²s tp = 8.3 ms A²s Operating junction temperature -50 ... +150 °C Tj DC forward (bypass) mode 5) -50 ... +200 °C Tstg Storage temperature -50 ... +175 °C Tj Characteristics Symbol Conditions min. typ. max. Unit Ta = 25 °C, unless otherwise specified IR Tj = 25 °C, VR = VRRM 500 µA IR Tj = 100 °C, VR = VRRM 25 mA Cj at 1 MHz and applied reverse voltage of 4 V - pF ERSM L = 60 mH, Tj = 25 °C, inductive load switched off - mJ Rthja 4) - K/W RthjL 6) 4 K/W Diode © by SEMIKRON Rev. 3 – 21.01.2011 1 SB 1520S ... SB 15100S Fig.1: Forward characteristics (typical value) Fig.2: Rated forward current vs. ambient temperature 1) Fig.3: Thermal resistance versus distance from case 2 Rev. 3 – 21.01.2011 © by SEMIKRON SB 1520S ... SB 15100S Case: 5,4 x 7,5 [mm] This is an electrostatic discharge sensitive device (ESDS), international standard IEC 60747-1, Chapter IX * The specifications of our components may not be considered as an assurance of component characteristics. Components have to be tested for the respective application. Adjustments may be necessary. The use of SEMIKRON products in life support appliances and systems is subject to prior specification and written approval by SEMIKRON. We therefore strongly recommend prior consultation of our staff. © by SEMIKRON Rev. 3 – 21.01.2011 3