SA1510 DC MOTOR DRIVER DESCRIPTION SA1510 is a monolithic integrated circuit designed for the rotating speed control and DC motor driver. SA1510 adopts bridge driver circuit which have two output port, used for drive positive and inverse direction of DIP-8-300-2.54 motor, the peak value of the drive current is 1.25A. FEATURES * Operating voltage range: 5V~12V; * Integrated control and drive SOP-8-225-1.27 * Output peak value current of 1.25A(duration 30 seconds) * Output regulation current is 700mA; it can be running under 1.0A if heat sinking can be solved. ORDERING INFORMATION * Meet the standard CMOS output. * Built-in protection diode, suitable for sensibility load. Device APPLICATIONS Package SA1510 DIP-8-300-2.54 SA1510S SOP-8-225-1.27 * Applied in car model, plane model and small size model. * Operating temperature: -20~+85°C BLOCK DIAGRAM PIN CONFIGURATIONS 8 MCT2 VCC1 2 7 VCC2 OUT1 3 SA1510 MCT1 1 GND 4 HANGZHOU SILAN MICROELECTRONICS CO.,LTD Http: www.silan.com.cn 6 OUT2 5 GND REV:1.0 2004.07.31 Page 1 of 3 SA1510 WAVE FORM (VCC=6.0V, Tamb=27°C) 6.0V MCT1 0V 6.0V MCT2 0V 4.5V OUT2 0V 4.5V OUT1 0V 0.7A IOUT -0.7A TYPICAL APPLICATION CIRCUIT VCC Control1 MCT1 MCT2 VCC1 VCC2 OUT1 OUT2 GND GND Control2 + MOTOR M - GND HANGZHOU SILAN MICROELECTRONICS CO.,LTD Http: www.silan.com.cn REV:1.0 2004.07.31 Page 2 of 3 SA1510 PACKAGE OUTLINE DIP-8-300-2.54 Unit: mm SOP-8-225-1.27 HANGZHOU SILAN MICROELECTRONICS CO.,LTD Http: www.silan.com.cn UNIT: mm REV:1.0 2004.07.31 Page 3 of 3