PRODUCT DATASHEET FxFIBER-SFP iNDUSTRIAL fAST eTHERNET fIBER tRANSCEIVERS PRODUCT HIGHLIGHTS n n n SFP 155 Mbps fiber transceivers with LC style connectors Pluggable for quick and easy installation saves you time Industry standard Small Form Factor (MSA compliant) - saves you space n Multimode and singlemode models available n Noise immune fiber runs up to 120 km n Industrial rated for -40 to 85°C operation n Vibration resistance latching mechanism n n n n Fully compliant with IEEE 802.3u Fast Ethernet (100Base) standard plus STM-1, OC-3 and SONET/SDH Lead and Hazardous Substance Free RECOMMENDED OPERATING CONDITIONS Parameter Min. Typ. Max Unit Note 85 o Operating Temperature -40 - Storage Temperature -40 - C - 85 o C - Low power consumption Humidity 5 - 95 % non-condensing Laser Class 1 Product – IEC 60825-1 Compliant Standard duplex LC receptacle Power Supply Voltage 3.1 3.3 3.5 V - Total Current (transmiter + receiver) - - 300 250 mA For MM fiber For SM fiber Maximum Data Rate - 155 - Mbit/s - MECHANICAL DIMENSIONS (UNITS IN MM) solutions for your industrial networking challenges www.sixnet.com fxFIBER-sfp industrial fast ethernet fiber transceivers Transmitter optical characteristics: Parameter Rating* Min. Typ. Max. Unit Note 2km -20 - -14 dBm For MM fiber 30km 60km, 100km -9 -5 - -3 0 dBm For SM fiber 2km 30km, 60km, 100km 10 9 - - dB For MM fiber For SM fiber 2km 30km, 60km 100km 1270 1270 1480 1310 1310 1550 1380 1355 1580 nm For MM fiber For SM fiber For SM fiber 2km - 135 160 nm For MM fiber 30km, 60km 100km - - 2.5 1.0 nm nm For SM fiber Rise/Fall time (20%-80%) 2km - - 3.0 ns For MM fiber Rise/Fall time (10%-90%) 30km, 60km, 100km - - 2.0 ns For SM fiber Relative Intensity Noise 2km 30km, 60km, 100km - - -120 -120 dB/Hz For MM fiber For SM fiber Output Eye Compliant with ITU-T G.957 Max P out TX-DISABLE Asserted 2km 30km, 60km, 100km Output Optical Power From Multimode Fiber Output Optical Power From Single Mode Fiber Extinction Ratio Output Center Wavelength Spectral Width (FWHM) Spectral Width (RMS For all fiber - - -45 -45 dBm For MM fiber For SM fiber - -3 - - dBm For all fiber 2km 30km 60km, 100km - - -32 -34 -35 dBm Fot MM fiber For SM fiber For SM fiber Operating Wavelength For all 1260 - 1610 nm For all fiber Optical Return Loss For all 12 - - dB For all fiber 2km 30km 60km, 100km - - -32 -34 -35 dBm For all fiber For all -45 - - dBm For all fiber 2km 30km, 60km, 100km 1.0 0.5 - 6 dB For MM fiber For SM fiber Receiver optical characteristics: Optical Input Power Sensitivity Loss of Signal - Deasserted Loss of Signal - Asserted Loss of Signal - Hysteresis ORDERING GUIDE Part Number Availability * Note: The nominal distance is for reference only. For more accurate distance estimations the power budget method should be used. Mode Data Rate (Mbps) Light Source TX (dBm) Min. TX (dBm) Max. RX (dBm) Sen Connector Type Nominal * Max. Distance FMFIBER-SFP-4K standard multimode 155 1310 LED -20 -14 -32 LC 4km FSFIBER-SFP-30K standard singlemode 155 1310 FP -9 -3 -34 LC 30km FSFIBER-SFP-60K standard singlemode 155 1310 FP -5 0 -35 LC 60km FSFIBER-SFP-100 standard singlemode 155 1550 DFB -5 0 -35 LC 100km All specifications are subject to change. Consult factory for latest info. SIXNET Technology Park 331 Ushers Road • Ballston Lake, NY 12019 • USA 1.518.877.5173 • Fax 1.518.877.8346 • [email protected] solutions for your industrial networking challenges Datasheet FxFIBER-SFP Rev: 10 Aug, 2009 www.sixnet.com