PRODUCT DATASHEET FxFIBER-SC-ST iNDUSTRIAL Fast Ethernet Fiber Optic Ports RECOMMENDED OPERATING CONDITIONS PRODUCT HIGHLIGHTS n Multimode and singlemode models available n Noise immune fiber optic runs up to 120 km n Industrial rated for -40 to 85°C operation nAvailable in SC or ST duplex connectors (FC available special order) n Fully compliant with IEEE 802.3u Fast Ethernet (100 Mbps) standards n Low power consumption Parameter Min. Typ. Max Operating Temperature -40 - 85 Storage Temperature -40 - 85 Data Rate 50 155 200 Unit Note o C - o C - Mbit/s - These industrial rated fiber optic transceivers are integrated in many SIXNET Industrial Ethernet switches. Lead and Hazardous Substance Free _-__-__ ORDERING GUIDE Note: This doesn’t apply to all models. Refer to the datasheet of each model for exact ordering information.) SLX SL Product line SLX= =Slim SlimLine Line SL ET = EtherTrak 8 Port count 2 thru 18 or more MS switch type ES = Ethernet (unmanaged) RS = Ring MS = Managed MG = Gigabit Managed RG = Gigabit Ring 4 SC fiber Ports 2 = 1 MM up to 4km 3 = 1 SM up to 20km 4 = 2 MM up to 4km 5 = 2 SM up to 20km 6 = 3 MM up to 4km 7 = 3 SM up to 20km 8 = 4 MM up to 4km 9 = 4 SM up to 20km solutions for your industrial networking challenges connector type SC = SC Duplex ST = ST Duplex www.sixnet.com Fxfiber-sc-st industrial fast ethernet fiber Optic Ports Transmitter optical characteristics: Parameter Rating1 Min. Typ. Max. Unit Note 4km (LED) 20km (FP) 40km (FP) 60km (FP) 80km (DFB) 120km (DFB) -19 -15 -5 -3 -5 0 -2.5 2.5 -14 -7 0 2 0 5 dBm Average Extinction Ratio 4km, 20km 40, 60, 80, 120KM 8.2 10 - - dB P1/P0 Output Center Wavelength 4km, 20km, 40km 80km, 120km 1260 1480 1310 1550 1360 1580 nm Spectral Width (-20dB) 4km 20km 40km, 60km 80km, 120km - - 80 7.7 4 1 nm Side Mode Suppression Ratio 80km, 120km 30 - - dB all models - - 2 ns - - - -117 dB/Hz Optical Transmit Power Rise/Fall time (10%-90%) Relative Intensity Noise Output Eye Compliant with Bellcore TR-NWT-000253 and ITU-T G.957/OC-3 receiver optical characteristics: Wavelength Operation all models 1200 - 1600 4km 20km 40km, 80km 60km 120km - - -32 -31 -34 -36 -35 Saturation Input Power all models -3 - - dBm Signal Detect-Asserted 4km 20km 40km, 80km 60km 120km - - -32 -31 -34 -36 -35 dBm Signal Detect- Deasserted all models -45 - - dBm Signal Detect- Hysteresis all modela 1 - 6 dB Sensitivity nm dBm 2 2 Notes: 1. The distance rating is for reference only. The actual transmission distance will depend on the system setup and the power budget should be used for distance estimation. 2. Minimum sensitivity and saturation levels measured at 10-10 BER for 223 – 1 PRBS All specifications are subject to change. Consult factory for latest info. SIXNET Technology Park 331 Ushers Road • Ballston Lake, NY 12019 • USA 1.518.877.5173 • Fax 1.518.877.8346 • [email protected] solutions for your industrial networking challenges Datasheet Fxfiber-sC-ST Rev: 10 Aug, 2009 www.sixnet.com