SKYWORKS SK40715

DATA SHEET
SKY13344-378LF: 2.0-6.0 GHz GaAs SPDT Switch
Applications
INPUT
x WLAN 802.11 a/b/g networks
x WLAN repeaters
x ISM band radios
x Low power transmit receive systems
Output2
Output1
Features
x Positive voltage control (0 and 1.8 V to 0 and 5.0 V)
x Broadband frequency range: 2.0-6.0 GHz
x Very low insertion loss, 0.35 dB typical @ 3 GHz
x High isolation, 27 dB typical @ 3 GHz
x Excellent linearity performance, P1dB = +27 dBm
x Ultra-miniature, MLPD (6-pin, 1 x 1 mm) package (MSL1,
260 qC per JEDEC J-STD-020)
VCTL1
VCTL2
S1481
Figure 1. SKY13344-378LF Block Diagram
Description
The SKY13344-378LF is a pHEMT GaAs FET I/C switch. The
switch may be used in transmit/receive applications by
connecting the RF common port (INPUT, pin 5) to either the
OUTPUT1 or OUTPUT2 port (pin 1 or 3, respectively) using a low
loss path (i.e., a positive voltage applied to either VCTL1 or VCTL2
pins). The switch is “reflective short” on the isolated port.
The switch is manufactured in a compact, 1 x 1 mm, 6-pin
exposed pad plastic Micro Leadframe Package Dual (MLPD)
package.
A functional block diagram is shown in Figure 1. The pin
configuration and package are shown in Figure 2. Signal pin
assignments and functional pin descriptions are provided in
Table 1.
OUTPUT1
1
6
VCTL1
GND
2
5
INPUT
OUTPUT2
3
4
VCTL2
S1482
Figure 2. SKY13344-378LF Pinout – 6-Pin QFN
(Top View)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
201095C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • December 17, 2009
1
DATA SHEET • SKY13344-378LF SPDT SWITCH
Table 1. SKY13344-378LF Signal Descriptions
Pin #
1
Name
OUTPUT1
Description
Pin #
RF port. Must be DC blocked.
4
Name
VCTL2
Description
DC control voltage
2
GND
Ground
5
INPUT
RF port. Must be DC blocked
3
OUTPUT2
RF port. Must be DC blocked.
6
VCTL1
DC control voltage
Table 2. SKY13344-378LF Absolute Maximum Ratings
Parameter
Symbol
Minimum
Typical
Maximum
Units
+32
+31
dBm
dBm
Input power
>500 MHz, 5 V
>500 MHz, 3 V
PIN
Storage temperature
TSTG
–65
+150
qC
Operating temperature
TOP
–40
+85
qC
Note:
Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device
must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body
or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times.
Table 3. SKY13344-378LF Recommended Operating Conditions
Maximum
Units
Frequency
Parameter
f
Symbol
2.0
6.0
GHz
Control voltage:
low
high
VCTL_L
VCTL_H
0
1.8
0.2
5.0
V
V
Operating temperature
TOP
Electrical and Mechanical Specifications
The absolute maximum ratings of the SKY13344-378LF are
provided in Table 2. The recommended operating conditions are
specified in Table 3 and electrical specifications are provided in
Table 4.
Minimum
Typical
+25
Typical performance characteristics of the SKY13344-378LF are
illustrated in Figures 3 through 9.
The state of the SKY13344-378LF is determined by the logic
provided in Table 5.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
2
qC
December 17, 2009 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201095C
DATA SHEET • SKY13344-378LF SPDT SWITCH
Table 4. SKY13344-378LF Electrical Specifications (Note 1)
(VCTL = 0 V and +2.7 V, TOP = +25 qC, PIN = 0 dBm, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted)
Parameter
Frequency
Symbol
Test Condition
f
Min
Typical
Max
Units
6.0
GHz
0.35
0.60
0.50
0.80
dB
dB
2.0
Insertion loss
2.0-3.0 GHz
3.0-6.0 GHz
Isolation
2.0-3.0 GHz
3.0-6.0 GHz
25.0
27.0
22.0
dB
dB
Return loss (insertion loss state)
2.0-3.0 GHz
3.0-6.0 GHz
14
21
21
dB
dB
10
100
ns
ns
25
mV
+19
dBm
+27
dBm
+37
dBm
+50
dBm
802.11a, 54 Mbps,
PIN = <+19 dBm,
VCTL = 3.3 V
2.5
%
802.11g, 54 Mbps,
PIN = <+24 dBm,
VCTL = 3.3 V
2.5
%
Switching characteristics:
Rise/fall time
On/off time
10/90% or 90/10% RF
50% VCTL to 90/10% RF
Video feedthrough
Input power for 1 dB compression
Input IP3
VCTL = 0 & 1.8 V, 2.45 GHz
VCTL = 0 & 2.7 V,
2.45 GHz
IIP3
PIN = +5 dBm/tone
VCTL = 0 & 1.8 V, 2.45 GHz
VCTL = 0 & 2.7 V,
2.45 GHz
Error Vector Magnitude
EVM
Control voltage:
Low
High
VCTL_L
VCTL_H
Supply current
ICC
0
1.8
VCTL_L = 0 V
VCTL_H = 5 V
2.7
0.2
5.0
5
5
V
V
μA
μA
Note 1: Performance is guaranteed only under the conditions listed in this Table.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
201095C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • December 17, 2009
3
DATA SHEET • SKY13344-378LF SPDT SWITCH
Typical Performance Characteristics
(VCTL = 0 V and +2.7 V, TOP = +25 qC, PIN = 0 dBm, Characteristic Impedance [ZO] = 50 Ω, Blocking Capacitors = 100 pF,
Bypass Capacitors = 33 pF, Unless Otherwise Noted)
0
0
INPUT to OUTPUT1
INPUT to OUTPUT2
–5
–0.1
–10
–0.2
Isolation (dB)
Insertion Loss (dB)
–15
–0.3
–0.4
–0.5
–0.6
–20
–25
–30
–35
–0.7
INPUT to OUTPUT1
INPUT to OUTPUT2
–0.8
–40
–45
–0.9
–50
2.0
–1.0
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
2.5
3.0
3.5
6.0
4.0
4.5
5.0
5.5
6.0
Frequency (GHz)
Frequency (GHz)
Figure 4. Typical Isolation
Figure 3. Typical Insertion Loss
0.1
0
–0.1
0
–0.2
Compression (dB)
–5
–10
Return Loss (dB)
–15
–20
–25
–30
–0.3
–0.4
1.8 V
1.9 V
2.0 V
2.5 V
2.7 V
3.0 V
5.0 V
–0.5
–0.6
–0.7
–35
–0.8
INPUT to OUTPUT1, S11
INPUT to OUTPUT2, S11
–40
–0.9
–45
–1
–50
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
0
+4
+8
+12
+16
+20
+24
+28
+32
+36
Input Power (dBm)
Frequency (GHz)
Figure 6. Compression vs Control Voltage
(2450 MHz)
Figure 5. Typical Return Loss
3.0
5.2 GHz, 2.7 V
5.2 GHz, 3.0 V
5.2 GHz, 3.3 V
5.8 GHz, 2.7 V
5.8 GHz, 3.0 V
5.8 GHz, 3.3 V
2.5
0
2.0
EVM (%)
Compression (dB)
–0.2
–0.4
1.7 V
1.8 V
2.1 V
2.5 V
2.7 V
3.0 V
3.3 V
4.0 V
5.0 V
–0.6
–0.8
–1.0
1.5
1.0
0.5
0
–1.2
0
+4
+8
+12
+16
+20
+24
+28
Input Power (dBm)
Figure 7. Compression vs Control Voltage
(5.2 to 5.8 GHz)
+32
0
2
4
6
8
10
12
14
16
18
20
24
26
Figure 8. 802.11a EVM vs Input Power, 5.2-5.8 GHz, 54 Mbps
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
4
22
Input Power (dBm)
December 17, 2009 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201095C
DATA SHEET • SKY13344-378LF SPDT SWITCH
3.0
2.5
EVM (%)
2.0
1.5
1.0
2.7 V
3.0 V
3.3 V
5.0 V
0.5
0
0
2
4
6
8 10 12 14 16 18 20 22 24 26 28 30 32 34
Input Power (dBm)
Figure 9. 802.11g EVM vs Input Power @ 2.45 GHz, 54 Mbps
Table 5. SKY13344-378LF Truth Table
Note:
VCTL1 (Pin 6)
VCTL2 (Pin 4)
INPUT to OUTPUT1 Path
INPUT to OUTPUT2 Path
0
1
Isolation
Insertion loss
1
0
Insertion loss
Isolation
“1” = +1.8 V to +5 V. “0” = 0 V to +0.2 V. Any state other than described in this Table places the switch into an undefined state. An undefined state will not damage the device.
Evaluation Board Description
Package and Handling Information
The SKY13344-378LF Evaluation Board is used to test the
performance of the SKY13344-378LF SPDT Switch. An Evaluation
Board schematic diagram is provided in Figure 10. An assembly
drawing for the Evaluation Board is shown in Figure 11.
Since the device package is sensitive to moisture absorption, it is
baked and vacuum packed before shipping. Instructions on the
shipping container label regarding exposure to moisture after the
container seal is broken must be followed. Otherwise, problems
related to moisture absorption may occur when the part is
subjected to high temperature during solder assembly.
Package Dimensions
The PCB layout footprint for the SKY13344-378LF is provided in
Figure 12. Typical case markings are shown in Figure 13.
Package dimensions for the 6-pin MLPD are shown in Figure 14,
and tape and reel dimensions are provided in Figure 15.
THE SKY13344-378LF is rated to Moisture Sensitivity Level 1
(MSL1) at 260 qC. It can be used for lead or lead-free soldering.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format. For packaging details, refer to the Skyworks
Application Note, Discrete Devices and IC Switch/Attenuators
Tape and Reel Package Orientation, document number 200083.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
201095C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • December 17, 2009
5
DATA SHEET • SKY13344-378LF
C4
C1
OUTPUT1
VCTL1
INPUT
C2
C3
VCTL2
OUTPUT2
C5
C1, C2, & C3 are DC blocking capacitors (100 pF)
C4 & C5 are bypass capacitors (33 pF)
S1496
Figure 10. SKY13344-378LF Evaluation Board Schematic
VCTL2
0 or +3 V DC Source (Pin 4)
OUTPUT1
J3
C1
J1
C4
C5
J2
C2
INPUT
C3
VCTL1
OUTPUT2
0 or +3 V DC Source (Pin 6)
C1, C2, C3 = BLocking Capacitors (100 pF)
C4 and C5 = Bypass Capacitors (33 pF)
Figure 11. SKY13344-378LF Evaluation Board Assembly Diagram
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
6
December 17, 2009 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201095C
S1483
DATA SHEET • SKY13344-378LF SPDT SWITCH
8X 0.65
0.13
0.21
5X 0.33
Pin 1
7X 0.15
0.35
Pitch
Part Outline
R0.075 Typ
0.10
Exposed Soldering
Area
All measurements in millimeters
S1484
Figure 12. SKY13344-378LF PCB Layout Footprint
(Top View)
Pin 1
Indicator
Skyworks Part #
Figure 13. Typical Case Markings
(Top View)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
201095C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • December 17, 2009
7
DATA SHEET • SKY13344-378LF SPDT SWITCH
C
Seating Plane
0.50/0.41
1
A
0.05/0.00
B
Pin 1
Indicator
R0.075 Typ
0.13 ± 0.1
Pin 1
3X 0.15 ± 0.05
0.1 ± 0.1
0.2 ± 0.1
0.33 ± 0.1
1
0.35
Pitch
0.05 C
2X
6X
0.10 C
2X
3
0.08 C
See Detail A
Exposed Pad
0.05 C
0.1 ± 0.1
0.21 ± 0.1
Top View
Side View
Bottom View
0.175 ± 0.075
R(0.075)
0.15 ± 0.05
0.10 M C A B
All measurements are in millimeters.
Dimensioning and tolerancing according to ASME Y14.5M-1994.
Detail A
(5X)
Figure 14. SKY13344-378LF 6-Pin QFN Package Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
8
December 17, 2009 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201095C
S1485
DATA SHEET • SKY13344-378LF SPDT SWITCH
ϕ1.50 +0.1/–0
ϕ0.50 Min.
2.00 ± 0.05 (See Note 3)
4.00 (See Note 1)
0.25 ± 0.05
A
B
B
8.0 +0.3/–0.1
1.75 ± 0.10
3.50 ± 0.05
(See Note 3)
Bo
R 0.10 Max
5o
Ko
Ao
2.00
R.10 Typ.
A
.06
.01
Section A
Notes:
1. 10 sprocket hole pitch cumulative tolerance ±0.2.
2. Chamber in compliance with EIA 481.
3. Pocket position relative to sprocket hole measured
as true position of pocket, not pocket hole.
4. Ao and Bo are measured from a plane at a distance “R”
above the bottom of the pocket.
5. Carrier tape: black conductive polycarbonate or polystyrene.
6. Cover tape material: transparent conductive PSA.
7. Cover tape size 5.4 mm wide.
8. All measurements are in millimeters.
Ao = 1.10 ± 0.05
Bo = 1.10 ± 0.05
Ko = 0.61 ± 0.05
Section B
S1515
Figure 15. SKY13344-378LF Tape and Reel Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
201095C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • December 17, 2009
9
DATA SHEET • SKY13344-378LF SPDT SWITCH
Ordering Information
Model Name
SKY13344-378LF SPDT Switch
Manufacturing Part Number
SKY13344-378LF (Pb-free and Green package)
Evaluation Kit Part Number
SK40715, Rev. 1
Copyright © 2009 Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by
Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions
of Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands
and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com,
are incorporated by reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
10
December 17, 2009 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201095C