Mar. 16, 2007 622Mbps SFP Transceiver with Spring Latch (With monitoring function, industrial case temperature for 15km～80km transmission ) Members of FlexonTM Family Compatible with ITU-T G.957 and G.958 Compatible with Telcordia GR-253-CORE Compatible with FCC 47 CFR Part 15, Class B Compatible with FDA 21 CFR 1040.10 and 1040.11, Class I RoHS Compliance Description Features Fiberxon 622Mbps i-temp Spring-latch SFP transceiver is high performance, cost effective Up to 622Mbps data-rate module that supports data-rate of 622Mbps and 1310nm FP laser and PIN photodetector for transmission distance from 15km to 80km. 15km transmission 1310nm DFB laser and PIN photodetector for The transceiver consists of two sections: The 40km transmission transmitter section incorporates a FP or uncooled 1550nm uncooled DFB laser and PIN DFB laser, and the receiver section consists of a photodetector for 80km transmission PIN photodiode integrated with a trans-impedance Digital diagnostic monitor interface compatible preamplifier (TIA). All modules satisfy class I laser with SFF-8472 safety requirements. SFP MSA package with duplex LC connector With spring latch for easily removing The optical output can be disabled by a TTL logic Very low EMI and excellent ESD protection high-level input of Tx Disable. Tx Fault is provided to +3.3V single power supply indicate degradation of the laser. Loss of signal Operating case temperature: -40 to +85°C (LOS) output is provided to indicate the loss of an input optical signal of receiver. Applications An enhanced Digital Diagnostic Monitoring Interface compatible with SFF-8472 has been incorporated SDH STM-4, S-4.1, L-4.1, L-4.2 into the transceivers. It allows real time access to SONET OC-12 IR1, LR1, LR2 the transceiver operating parameters such as Other optical links transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage by reading a built-in memory with I2C interface. For further information, Standard please refer to SFF-8472 Rev 9.5. Compatible with SFP MSA Compatible with SFF-8472 Rev 9.5 Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 1 of 12 622Mbps i-temp Spring-latch SFP Transceiver Preliminary Datasheet 15～80 km transmission with Monitoring function Mar 16, 2007 Regulatory Compliance The transceivers have been tested according to American and European product safety and electromagnetic compatibility regulations (See Table 1). For further information regarding regulatory certification, please refer to Fiberxon regulatory specification and safety guidelines, or contact with Fiberxon, Inc. America sales office listed at the end of the documentation. Table 1- Regulatory Compliance Feature Standard Electrostatic Discharge MIL-STD-883E (ESD) to the Electrical Pins Method 3015.7 Electrostatic Discharge (ESD) IEC 61000-4-2 to the Duplex LC Receptacle GR-1089-CORE Performance Class 2(>2000 V) Compatible with standards FCC Part 15 Class B Electromagnetic EN55022 Class B (CISPR 22B) Interference (EMI) Compatible with standards VCCI Class B Immunity Laser Eye Safety Component Recognition RoHS IEC 61000-4-3 Compatible with standards FDA 21CFR 1040.10 and 1040.11 Compatible with Class 1 laser EN60950, EN (IEC) 60825-1,2 product. UL and CSA Compatible with standards 2002/95/EC 4.1&4.2 Compliant with standards note 2005/747/EC Note: In light of item 5 in Annex of 2002/95/EC, “Pb in the glass of cathode ray tubes, electronic components and fluorescent tubes.” and item 13 in Annex of 2005/747/EC, “Lead and cadmium in optical and filter glass.”, the two exemptions are being concerned for Fiberxon’s transceivers, because Fiberxon’s transceivers use glass, which may contain Pb, for components such as lenses, windows, isolators, and other electronic components. Absolute Maximum Ratings Stress in excess of the maximum absolute ratings can cause permanent damage to the module. Table 2 - Absolute Maximum Ratings Parameter Symbol Min. Max. Unit Storage Temperature TS -40 +85 °C Supply Voltage VCC -0.5 3.6 V - 5 95 % Operating Relative Humidity Recommended Operating Conditions Table 3- Recommended Operating Conditions Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 2 of 12 622Mbps i-temp Spring-latch SFP Transceiver Preliminary Datasheet 15～80 km transmission with Monitoring function Parameter Symbol Min. Operating Case Temperature TC Power Supply Voltage VCC Power Supply Current ICC Mar 16, 2007 Typical Max. Unit -40 +85 °C 3.13 3.47 V 300 mA Data Rate 622 Mbps Optical and Electrical Characteristics All parameters are specified at overall operating case temperature and power supply range, unless otherwise stated. FTM-3106C-SL15iG (1310nm FP and PIN, 15km, Monitoring function) Table 4 - Optical and Electrical Characteristics (TC=250C, VCC=3.3V) Parameter Symbol Min. Typical Max. Unit Notes Transmitter Centre Wavelength λC 1274 1356 nm Average Output Power P0ut -15 -8 dBm Spectral Width (RMS) σ 2.5 nm Extinction Ratio EX 8.2 dB Jitter Generation (RMS) 0.01 UI Jitter Generation (pk-pk) 0.1 UI Compatible with Telcordia GR-253-CORE and ITU-T Output Optical Eye G.957 Data Input Swing Differential VIN 300 Input Differential Impedance ZIN 90 TX Disable TX Fault 1 100 1860 mV 110 Ω 2 3 Disable 2.0 Vcc V Enable 0 0.8 V 2.0 Vcc+0.3 V 0 0.8 V 1580 nm -28 dBm 4 dBm 4 1 dB 5 -31 dBm Fault Normal Receiver Centre Wavelength λC 1260 Receiver Sensitivity Receiver Overload -8 Optical Path Penalty LOS De-Assert LOSD LOS Assert LOSA LOS Hysteresis dBm 1 4 dB 370 1800 mV High 2.0 Vcc+0.3 V Low 0 0.8 V Data Output Swing Differential LOS -42 VOUT Notes: 1. The optical power is launched into SMF. Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 3 of 12 6 622Mbps i-temp Spring-latch SFP Transceiver Preliminary Datasheet 15～80 km transmission with Monitoring function Mar 16, 2007 2. Measured with a PRBS 223-1 test pattern @622Mbps. 3. Internally AC coupled and terminated. 4. Measured with a PRBS 223-1 test pattern @622Mbps, BER ≤1×10-10. 5. Measured with a PRBS 223-1 test pattern @622Mbps, over 15km G.652 SMF, BER ≤1×10-10. 6. Internally AC coupled. FTM-3106C-SL40iDG (1310nm DFB and PIN, 40km, Monitoring function) Table 5 - Optical and Electrical Characteristics Parameter Symbol Min. Typical Max. Unit Notes Transmitter Centre Wavelength λC 1280 1335 nm Average Output Power P0ut -3 +2 dBm Spectral Width (-20dB) ∆λ 1 nm Side Mode Suppression Ratio SMSR 30 dB EX 10 dB Extinction Ratio Jitter Generation (RMS) 0.01 UI Jitter Generation (pk-pk) 0.1 UI Compatible with Telcordia GR-253-CORE and ITU-T Output Optical Eye G.957 Data Input Swing Differential VIN 300 Input Differential Impedance ZIN 90 TX Disable TX Fault 100 1860 mV 110 Ω 1 2 3 Disable 2.0 Vcc V Enable 0 0.8 V 2.0 Vcc+0.3 V 0 0.8 V 1580 nm -28 dBm 4 dBm 4 1 dB 5 -31 dBm Fault Normal Receiver Centre Wavelength λC 1260 Receiver Sensitivity Receiver Overload -8 Optical Path Penalty LOS De-Assert LOSD LOS Assert LOSA LOS Hysteresis dBm 1 4 dB 370 1800 mV High 2.0 Vcc+0.3 V Low 0 0.8 V Data Output Swing Differential LOS -42 VOUT Notes: 1. The optical power is launched into SMF. 2. Measured with a PRBS 223-1 test pattern @622Mbps. 3. Internally AC coupled and terminated. 4. Measured with a PRBS 223-1 test pattern @622Mbps, BER ≤1×10-10. 5. Measured with a PRBS 223-1 test pattern @622Mbps, over 40km G.652 SMF, BER ≤1×10-10. Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 4 of 12 6 622Mbps i-temp Spring-latch SFP Transceiver Preliminary Datasheet 15～80 km transmission with Monitoring function Mar 16, 2007 6. Internally AC coupled. FTM-5106C-SL80iG (1550nm DFB and PIN, 80km, Monitoring function) Table 6 - Optical and Electrical Characteristics Parameter Symbol Min. Typical Max. Unit Notes Transmitter Centre Wavelength λC 1480 1580 nm Average Output Power P0ut -3 +2 dBm Spectral Width (-20dB) ∆λ 1 nm Side Mode Suppression Ratio SMSR 30 dB EX 10 dB Extinction Ratio Jitter Generation (RMS) 0.01 UI Jitter Generation (pk-pk) 0.1 UI Compatible with Telcordia GR-253-CORE and ITU-T Output Optical Eye G.957 Data Input Swing Differential VIN 300 Input Differential Impedance ZIN 90 TX Disable TX Fault 100 1860 mV 110 Ω Disable 2.0 Vcc V Enable 0 0.8 V 2.0 Vcc+0.3 V 0 0.8 V 1580 nm -28 dBm Fault Normal 1 2 3 Receiver Centre Wavelength λC 1260 Receiver Sensitivity Receiver Overload -8 dBm Optical Path Penalty LOS De-Assert LOSD LOS Assert LOSA LOS Hysteresis LOS 1 dB -31 dBm -42 4 dB 370 1800 mV High 2.0 Vcc+0.3 V Low 0 0.8 V VOUT 5 dBm 1 Data Output Swing Differential 4 Notes: 1. The optical power is launched into SMF. 2. Measured with a PRBS 223-1 test pattern @622Mbps. 3. Internally AC coupled and terminated. 4. Measured with a PRBS 223-1 test pattern @622Mbps, BER ≤1×10-10. 5. Measured with a PRBS 223-1 test pattern @622Mbps, over 80km G.652 SMF, BER ≤1×10-10. 6. Internally AC coupled. Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 5 of 12 6 622Mbps i-temp Spring-latch SFP Transceiver 15～80 km transmission with Monitoring function Preliminary Datasheet Mar 16, 2007 EEPROM Information The SFP MSA defines a 256-byte memory map in EEPROM describing the transceiver’s capabilities, standard interfaces, manufacturer, and other information, which is accessible over a two-wire serial interface at the 8-bit address 1010000X (A0h). For memory contents please refer to Table 7. Table 7 - EEPROM Serial ID Memory Contents (A0h) Addr. Field Size (Bytes) Name of Field Hex Description 0 1 Identifier 03 SFP 1 1 Ext. Identifier 04 MOD4 2 1 Connector 07 LC 3—10 8 Transceiver 00 xx xx 00 00 00 00 00 11 1 Encoding 03 NRZ 12 1 BR, nominal 06 622Mbps 13 1 Reserved 00 14 1 Length (9um)-km xx 15km/40km/80km(0F/28/50) 15 1 Length (9um) xx 15km/40km/80km(96/FF/FF) 16 1 Length (50um) 00 17 1 Length (62.5um) 00 18 1 Length (copper) 00 19 1 Reserved 20—35 16 Vendor name 36 1 Reserved 37—39 3 Vendor OUI 40—55 16 Vendor PN 56—59 4 Vendor rev xx xx 20 20 ASCⅡ( “31 30 20 20” means 1.0 revision) 60-61 2 Wavelength 05 1E/06 0E 1310nm/1550nm 62 1 Reserved 00 63 1 CC BASE xx 64—65 2 Options 00 1A 66 1 BR, max 00 67 1 BR, min 00 68—83 16 Vendor SN 84—91 8 92 1 Diagnostic type 58 93 1 Enhanced option B0 94 1 SFF-8472 02 Diagnostics(SFF-8472 Rev 9.4) 95 1 CC EXT xx Check sum of bytes 64 - 94 96—255 160 Vendor specific OC 12, Single mode inter. or long reach 00 46 49 42 45 52 58 4F 4E 20 49 4E 43 2E 20 20 20 “FIBERXON INC. “(ASCⅡ) 00 00 00 00 46 54 4D 2D xx 31 30 36 43 2D 53 4C xx xx xx xx “FTM-x106C-SLxxxxG ” (ASCⅡ) Check sum of bytes 0 - 62 LOS, TX_FAULT and TX_DISABLE xx xx xx xx xx xx xx xx ASCⅡ, xx xx xx xx xx xx xx xx Vendor date codexx xx xx xx xx xx 20 20 Year (2 bytes), Month (2 bytes), Day (2 bytes) Diagnostics(Ext.Cal) Diagnostics (Optional Alarm/warning flags, Soft TX_FAULT and Soft TX_LOS monitoring) Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 6 of 12 622Mbps i-temp Spring-latch SFP Transceiver 15～80 km transmission with Monitoring function Preliminary Datasheet Mar 16, 2007 Note: The “xx” byte should be filled in according to practical case. For more information, please refer to the related document of SFF-8472 Rev 9.5. Monitoring Specification The digital diagnostic monitoring interface also defines another 256-byte memory map in EEPROM, which makes use of the 8 bit address 1010001X (A2h). Please see Figure 1. For detail EEPROM information, please refer to the related document of SFF-8472 Rev 9.5. The monitoring specification of this product is described in Table 8. Figure 1, EEPROM Memory Map Specific Data Field Descriptions Table 8- Monitoring Specification TX Power RX Power Parameter Range Accuracy Calibration Temperature -45 to 95°C ±3°C External Voltage 3.0 to 3.6V ±3% External Bias Current 0 to 100mA ±10% External ±3dB External ±3dB External FTM-3106C-SL15iG -16 to –7 dBm FTM-3106C-SL40iDG -4 to +3 dBm FTM-5106C-SL80iG -4 to +3 dBm FTM-3106C-SL15iG -30 to –7 dBm FTM-3106C-SL40iDG -30 to –7 dBm FTM-5106C-SL80iG -30 to –7 dBm Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 7 of 12 622Mbps i-temp Spring-latch SFP Transceiver 15～80 km transmission with Monitoring function Preliminary Datasheet Mar 16, 2007 Recommended Host Board Power Supply Circuit Figure 2 shows the recommended host board power supply circuit. Figure 2, Recommended Host Board Power Supply Circuit Recommended Interface Circuit Figure 3 shows the recommended interface circuit. Host Board SFP Module Vcc (+3.3V) VccT 10K 2×4.7K to 10K TX Disable TX Fault Protocol IC SERDES IC SerDat Out + Z=50 TD + SerDat Out - Z=50 TD - SerDat In + Z=50 SerDat In - Z=50 Laser driver RD + Amplifier RD - LOS Vcc (+3.3V) 3×4.7K to 10K MOD-DEF2 EEPROM MOD-DEF1 MOD-DEF0 RGND Figure 3, Recommended Interface Circuit Pin Definitions Figure 4 below shows the pin numbering of SFP electrical interface. The pin functions are described in Table 9 with some accompanying notes. Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 8 of 12 622Mbps i-temp Spring-latch SFP Transceiver 15～80 km transmission with Monitoring function Preliminary Datasheet Mar 16, 2007 P in 2 0 T O P V IE W OF BOARD P in 1 1 P in 1 0 B O T T O M V IE W OF BOARD P in 1 Figure 4, Pin View Table 9 - Pin Function Definitions Pin No. Name 1 VeeT 2 TX Fault 3 Function Plug Seq. Notes Transmitter Ground 1 Transmitter Fault Indication 3 Note 1 TX Disable Transmitter Disable 3 Note 2 4 MOD-DEF2 Module Definition 2 3 Note 3 5 MOD-DEF1 Module Definition 1 3 Note 3 6 MOD-DEF0 Module Definition 0 3 Note 3 7 Rate Select Not Connected 3 8 LOS Loss of Signal 3 9 VeeR Receiver Ground 1 10 VeeR Receiver Ground 1 11 VeeR Receiver Ground 1 12 RD- Inv. Received Data Out 3 Note 5 13 RD+ Received Data Out 3 Note 5 14 VeeR Receiver Ground 1 15 VccR Receiver Power 2 16 VccT Transmitter Power 2 17 VeeT Transmitter Ground 1 18 TD+ Transmit Data In 3 Note 6 19 TD- Inv. Transmit Data In 3 Note 6 20 VeeT Transmitter Ground 1 Note 4 Notes: 1. TX Fault is an open collector output, which should be pulled up with a 4.7k~10kΩ resistor on the host board to a voltage between 2.0V and Vcc+0.3V. Logic 0 indicates normal operation; logic 1 indicates a laser fault of some kind. In the low state, the output will be pulled to less than 0.8V. 2. TX Disable is an input that is used to shut down the transmitter optical output. It is pulled up within the module with a 4.7k~10kΩ resistor. Its states are: Low (0~0.8V): Transmitter on (>0.8V, <2.0V): Undefined High (2.0~3.465V): Transmitter Disabled Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 9 of 12 622Mbps i-temp Spring-latch SFP Transceiver 15～80 km transmission with Monitoring function Open: Preliminary Datasheet Mar 16, 2007 Transmitter Disabled 3. MOD-DEF 0,1,2 are the module definition pins. They should be pulled up with a 4.7k~10kΩ resistor on the host board. The pull-up voltage shall be VccT or VccR. MOD-DEF 0 grounded by the module indicates that the module is present MOD-DEF 1 is the clock line of two-wire serial interface for serial ID MOD-DEF 2 is the data line of two-wire serial interface for serial ID 4. LOS is an open collector output, which should be pulled up with a 4.7k~10kΩ resistor on the host board to a voltage between 2.0V and Vcc+0.3V. Logic 0 indicates normal operation; logic 1 indicates loss of signal. In the low state, the output will be pulled to less than 0.8V. 5. These are the differential receiver outputs. They are internally AC-coupled 100Ω differential lines which should be terminated with 100Ω (differential) at the user SERDES. 6. These are the differential transmitter inputs. They are AC-coupled, differential lines with 100Ω differential termination inside the module. Mechanical Design Diagram The mechanical design diagram is shown in Figure 5. Figure 5, Mechanical Design Diagram of the SFP with Spring Latch Ordering information Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 10 of 12 622Mbps i-temp Spring-latch SFP Transceiver Preliminary Datasheet 15～80 km transmission with Monitoring function x FTM 1 0 6 Wavelength 3 : 1310nm 5 : 1550nm C S L Receptacle C : LC Package L : SFP with spring latch Function 1 : Monitoring x x Mar 16, 2007 x Distance 15: 15km 40: 40km 80: 80km x G Other2 G : RoHS Compliance Other 1 D : DFB laser for 40km Temperature S : Standard Temp i : Industrial Temp ( This bit will be omiited when it is "S" ) Data rate 06 : 622M Part No. FTM-3106C-SL15iG FTM-3106C-SL40iDG FTM-5106C-SL80iG Product Description 1310nm, 622Mbps, 15km, SFP with spring latch, Monitoring function, -40°C~+85°C, RoHS Compliance 1310nm, 622Mbps, 40km, SFP with spring latch, Monitoring function, DFB, -40°C~+85°C, RoHS Compliance 1550nm, 622Mbps, 80km, SFP with spring latch, Monitoring function, -40°C~+85°C, RoHS Compliance Related Documents For further information, please refer to the following documents: ■ Fiberxon SFP Application Notes ■ SFP Multi-Source Agreement (MSA) ■ SFF-8472 Rev 9.5 Obtaining Document You can visit our website: http://www.fiberxon.com Or contact Fiberxon, Inc. America Sales Office listed at the end of documentation to get the latest documents. Revision History Revision Rev. 1a Initiate Review Approve Solaris Zhu Simon Jiang Walker.Wei Subject Initial datasheet Release Date Mar 16, 2007 © Copyright Fiberxon Inc. 2007 All Rights Reserved. All information contained in this document is subject to change without notice. The products described in this document are NOT intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 11 of 12 622Mbps i-temp Spring-latch SFP Transceiver 15～80 km transmission with Monitoring function Preliminary Datasheet Mar 16, 2007 The information contained in this document does not affect or change Fiberxon’s product specifications or warranties. Nothing in this document shall operate as an express or implied license or indemnity under the intellectual property rights of Fiberxon or third parties. All information contained in this document was obtained in specific environments, and is presented as an illustration. The results obtained in other operating environment may vary. THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN ”AS IS” BASIS. In no event will Fiberxon be liable for damages arising directly from any use of the information contained in this document. Contact U.S.A. Headquarter: 5201 Great America Parkway, Suite 340 Santa Clara, CA 95054 U. S. A. Tel: 408-562-6288 Fax: 408-562-6289 Or visit our website: http://www.fiberxon.com Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 12 of 12