May 14, 2007 GPON ONT Triplexer FTM-9823T-CGH(i)(G) (ITU-T Rec.G.984.2) Members of FlexonTM Family Standard Compliant with ITU-T G.984.2, G.984.2 Amendment 1, G.983.3 Single Compliant with FCC 47 CFR Part 15, Class B Compliant with FDA 21 CFR 1040.10 and 1040.11, Class I Features fiber bi-directional triple links with Description 1244Mbit/s upstream and 2488Mbit/s downstream and 46~870MHz CATV receiver FTM-9823T-CGH(i)(G) is Optical Network Termination Burst mode operation transmitter with 1310nm (ONT) triplexer for 1244/2488M Class B+ application in DFB laser ITU-T Rec.G.984.2, Continuous mode operation digital receiver with G.983.3. 1490nm high sensitivity APD-TIA G.984.2 Amendment 1, and The triplexer is the high performance module for 46~870M CATV receiver with 1555nm analog PD Suitable for Voice/Data/Video FTTX applications 0 to 70°C(-40 to 85℃) operating case temperature Compact package with SC/APC pigtail Single 3.3V power supply for digital transceiver The transmitter section uses a multiple quantum well 12V power supply for CATV receiver 1310nm DFB laser, supporting power levelling with 3 LVPECL compatible data input and CML data modes (optional). The digital receiver section uses an output interface integrated 1490nm APD and preamplifier mounted in an LVPECL compatible differential transmitter optical header and limiting post-amplifier IC. When the burst-mode control 1490nm optical power is too large, the APD protection LVTTL digital receiver signal-detected indication circuit will works to protect APD. The CATV receiver APD automatic protect function section uses high performance analog PD and low noise Power Levelling Mechanism (optional) RF amplifier at 46~870MHz. Support MoCA application Flexible digital monitoring function implemented by a built-in microprocessor which can be accessed by I2C interface 1244/2488M data link in single fiber by using 1310nm burst mode transmitter and 1490nm continuous mode digital receiver with 1555nm CATV receiver. The optical burst output can be enabled by a LVPECL differential logic high-level input BEN+/BEN-. When BEN is high, the 1310nm output optical power will be very low without the transmitter data in. Signal Detected (SD) output is provided to indicate the detection of an input optical signal of digital receiver. Flexible digital Applications monitoring functional is implemented by a built-in Gigabit-capable Passive Optical Networks (GPON) – ONT side microprocessor with I2C interface. CATV AGC function is integrated in the triplexer, and user can set the RF level or disable the RF output through the I2C interface. Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 1 of 18 20-PIN Compact Package GPON ONT Triplexer FTM-9823T-CGH(i)(G) Class B+ attenuation range: 13-28dB Preliminary Data Sheet May 14. 2007 Document Confidential Level: In public Template ver. 1e Regulatory Compliance The transceivers have been tested according to American and European product safety and electromagnetic compatibility regulations (See Table 1). For further information regarding regulatory certification, please refer to FlexonTM regulatory specification and safety guidelines, or contact with Fiberxon, Inc. America sales office listed at the end of documentation. Table 1 - Regulatory Compliance Feature Standard Electrostatic Discharge MIL-STD-883E (ESD) to the Electrical Pins Method 3015.7 Performance Class Ⅰ(>500 V) FCC Part 15 Class B Electromagnetic EN55022 Class B (CISPR 22B) Interference (EMI) Compliant with standards VCCI Class B Immunity IEC 61000-4-3 Compliant with standards FDA 21CFR 1040.10 and 1040.11 Laser Eye Safety Compliant with Class I laser product EN60950, EN (IEC) 60825-1,2 Component Recognition UL and CSA Compliant with standards Flammability UL60950 UL 94 V-0 Absolute Maximum Ratings Absolute Maximum Ratings are those values, beyond which, some damages may occur to the devices. Exposure to conditions above the Absolute Maximum Ratings listed in Table 2 may negatively impact the reliability of the products. Table 2 - Absolute Maximum Ratings Parameter Storage Ambient Temperature Operating Temperature Operating Humidity (Non Condensing) Power Supply Voltage Input Voltage Symbol Min. Max. Unit TSTG -40 85 °C TOPR 0 70 °C FTM-9823T-CGH(G) TOPR -40 85 °C FTM-9823T-CGHi(G) HOPR 10 90 % V VCC 0 4 VDD_12V 0 15 GND VCC V +4 dBm CATV Receiver Damaged Threshold +3 dBm 260/10 Bending Radius 30 Pigtail Fiber Contact Temperature Digital Transceiver Analog Part Digital Receiver Damaged Threshold Soldering Temperature Note Digital Transceiver 1 °C/s mm 85 °C Note 1: When the optical power is great than -3dBm, the APD protection function will works, and the APD power supply will be cut off. Three way to make the APD work again: 1) Rewrite the APD protection Flag in EEPROM. 2) Rest the Microcontroller with software or hardware way. 3) Turn off ONT, and then turn it on again. Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 2 of 18 20-PIN Compact Package GPON ONT Triplexer FTM-9823T-CGH(i)(G) Class B+ attenuation range: 13-28dB Preliminary Data Sheet May 14. 2007 Document Confidential Level: In public Template ver. 1e Recommended Operating Conditions Table 3 - Recommended Operating Conditions Parameter Power Supply Voltage Operating Case Temperature1 Symbol Min. VCC VDD_12V TC Max. Unit Note 3.13 3.47 V 3.3V±5% 11.4 12.6 V 12V±5% 0 70 °C FTM-9823T-CGH(G) -40 85 °C FTM-9823T-CGHi(G) Data Rate (Upstream/Downstream) Typ. 1244.16/2488.32 Consecutive Identical Digital Immunity 72 CATV Receiver Bandwidth 46 Mbit/s Bit 870 MHz Note 1: Refer to Figure 4 for the temperature test point Optical and Electrical Characteristics Table 4 - Transmitter Optical and Electrical Characteristics (0°C <TC<70°C and 3.13V<VCC<3.47V) FTM-9823T-CGH(G) FTM-9823T-CGHi(G) (-40°C <TC<85°C and 3.13V<VCC<3.47V) Parameter Symbol Min. Optical Center Wavelength λC 1260 Optical Spectrum Width (-20dB) ∆λ Side Mode Suppression Ratio Max. Unit 1360 nm 1 nm Note SMSR 30 +5 dBm POUT -2.5 +2 dBm -5.5 0 dBm -45 dBm 2 dB 3 Mode 0 Average Launch Power Typ. Mode 1 0.5 Mode 2 Average Launch Power-OFF Transmitter 2 POFF Extinction Ratio ER 10 Burst Turn On Time TON 12.8 ns Burst Turn Off Time TOFF 12.8 ns -10 dB Transmitter Reflectance Tolerance to Transmitter Incident Light Power -15 0.5 dB Compliant With ITU-T G984.2 Data Input Differential Swing VIN 200 Data Common-Mode Input Voltage VCM Vcc-1.49 Input Differential Impedance ZIN 90 Power Supply Current 4 dB Optical Path Penalty Optical Eye Diagram 1 3,5 1600 mV Vcc-1.32 Vcc-VIN/4 V 100 110 Ω 300 mA ICC_TX 6 Note 1: Power Levelling Mechanism is optional. Note 2: Launched into 9/125um Single Mode Fiber. Note 3: Measured with PRBS 223-1 plus 72bits CID test pattern @1244.16Mbit/s and the Bessel-Thompson filter is turned on. Note 4: Refer to Timing Parameter Definition in Burst Mode Sequence. Note 5: Transmitter eye mask definition is shown as below. Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 3 of 18 20-PIN Compact Package GPON ONT Triplexer FTM-9823T-CGH(i)(G) Class B+ attenuation range: 13-28dB Preliminary Data Sheet May 14. 2007 Document Confidential Level: In public Template ver. 1e 1244.16Mbit/s x1/x4 0.22/0.78 x2/x3 0.40/0.60 y1/y4 0.17/0.83 y2/y3 0.20/0.80 Note 6: Compatible with LVPECL input (See Recommended Interface Circuit and Table 9 - Electrical Input/Output Coupling Mode) Table 5 - Digital Receiver Optical and Electrical Characteristics (0°C <TC<70°C and 3.13V<VCC<3.47V) FTM-9823T-CGH(G) FTM-9823T-CGHi(G) (-40°C <TC<85°C and 3.13V<VCC<3.47V) Parameter Symbol Operating Wavelength Min. Typ. Max. Unit 1480 1490 1500 nm Sensitivity -28 Overload -7 Signal-Detected Assert Level PSDA Signal-Detected Deassert Level PSDD -39 PSDA- PSDD 0.5 Signal-Detected Hysteresis -29 Tolerance to Reflected Optical Power Receiver Reflectance Notes dBm 1 dBm 2 dBm 3 6 dBm 10 dB -20 dB 200 mA 4 400 1000 mV 5 VSD, L 0 0.4 V Signal-Detected Voltage - High VSD, H 2.4 VCC V Signal-Detected Assert Time TASS 100 µs TDAS 100 µs Power Supply Current ICC_RX Data Output Differential Swing VOUT Signal-Detected Voltage - Low Signal-Detected Deassert Time 6 23 Note 1: Measured with PRBS 2 -1 plus 72bits CID test pattern @2488.32Mbit/s, ER=10dB, BER =10-10. Note 2: An increase in optical power above the specified level will cause the Signal Detect output to switch from a low state to a high state. Note 3: A decrease in optical power below the specified level will cause the Signal Detect output to switch from a high state to a low state. Note 4: The power supply current includes the microcontroller power supply. Note 5: CML output, AC coupled internally, guaranteed in the full range of input optical power (See Recommended Interface Circuit) Note 6: SD (See Pin Function Definitions) Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 4 of 18 20-PIN Compact Package GPON ONT Triplexer FTM-9823T-CGH(i)(G) Class B+ attenuation range: 13-28dB Preliminary Data Sheet May 14. 2007 Document Confidential Level: In public Template ver. 1e Table 6 - CATV Receiver Optical and Electrical Characteristics FTM-9823T-CGH(G) (0°C <TC<70°C, 3.13V<VCC<3.47V, and 11.4V<VDD_12V<12.6V) FTM-9823T-CGHi(G) (-40°C <TC<85°C, 3.13V<VCC<3.47V, and 11.4V<VDD_12V<12.6V) Parameter Symbol Min. Operating Wavelength Typ. Max. Unit Notes 1540 1560 nm Receiving Average Optical Power -8 +2 dBm RF AGC Dynamic Range 24 dB Responsivity 0.9 mA/mW RF Output Level 18 dBmV/ch Total RF output power 36 dBmV RF Output Impedance 75 CNR Ω 2 3 CNR 45 dB C/CSO C/CSO 55 dB C/CTB C/CTB 55 dB 975~1700M 25 1700~2100M 40 Rejection RF Return Loss 5 dB RF Output Tilt 2 dB RF Output Flatness IDD-12V RF AGC Time Constant 4 dB 14 Power Supply Current 1 3.0 dB 200 mA 3 ms 0.1 6 Note 1: Tested at 450MHz, OMI=4.4% per channel, RF_Setting=0 (Refer to Monitoring Specification). Note 2: Mini SMB Jack RF Connector Note 3: Tested at -8dBm, 88 channels in 46M~870M, OMI=3.5% per channel Note 4: Test at +2dBm, 88channels in 46M~870M Note 5: This rejection is relative to gain at 870 MHz Note 6: The specification is specified with the I2C communication silence. Table 7 – Microcontroller Circuit Characteristics FTM-9823T-CGH(G) (0°C <TC<70°C and 3.13V<VCC<3.47V) FTM-9823T-CGHi(G) Parameter (-40°C <TC<85°C and 3.13V<VCC<3.47V) Symbol Min. Typ. Max. Unit Reset Voltage – Low 0 0.8 V Reset Voltage – High 2.0 VCC V 0 0.4 V INT Voltage – Low INT Voltage – High 2.4 VCC V I2C Rate DC 100 kbs SCL, SDA Voltage - Low 0 0.8 V SCL, SDA Voltage - High 2.0 VCC V 50 mA Power Supply Current IMC Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Notes Standard Mode Page 5 of 18 20-PIN Compact Package GPON ONT Triplexer FTM-9823T-CGH(i)(G) Class B+ attenuation range: 13-28dB Preliminary Data Sheet May 14. 2007 Document Confidential Level: In public Template ver. 1e Table 8 - General TPXM Specifications Parameter Conditions Minimum Typical Maximum Units Optical Isolation From external 1310 nm to 1490 nm Rx 28 Optical Isolation From external 1310 nm to 1555 nm Rx 40 Optical Cross-talk From 1310 nm Tx to 1490 nm Rx -47 dB Optical Cross-talk From 1310 nm Tx to 1555 nm Rx -47 dB Optical Isolation From external 1555 nm to 1490 nm Rx 35 dB Optical Isolation From external 1490 nm to 1555 nm Rx 35 dB Reflectance 1480 ~ 1500 nm -30 dB Reflectance 1260 ~ 1360 nm -30 dB dB Table 9 - Electrical Input/Output Coupling Mode P/N Input (TD+/TD-) Output (RD+/RD-) Analog Output FTM-9823T-CGH Internal DC Coupling Internal AC Coupling 75Ω Mini SMB Jack Connector FTM-9823T-CGHG Internal DC Coupling Internal AC Coupling 75Ω Mini SMB Jack Connector FTM-9823T-CGHi Internal DC Coupling Internal AC Coupling 75Ω Mini SMB Jack Connector FTM-9823T-CGHiG Internal DC Coupling Internal AC Coupling 75Ω Mini SMB Jack Connector BEN Upstream Data (TD+/TD- at ONT side) Optical Signal (1-Level) Optical Signal Output (at ONT side) TON Optical Signal (0-Level) Dark Level T OFF Figure 1 Timing Parameter Definition in Burst Mode Sequence Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 6 of 18 20-PIN Compact Package GPON ONT Triplexer FTM-9823T-CGH(i)(G) Class B+ attenuation range: 13-28dB Preliminary Data Sheet May 14. 2007 Document Confidential Level: In public Template ver. 1e Recommended Interface Circuit Figure 2 shows the recommended interface scheme. +3.3V VEET(9,11) 0.1uF 2x1 uH 0.1uF 10uF 10uF PON_TX_ DISABLE+ PON_TX_ DISABLE- 0.1uF FTM- 9823T-CGH(i)(G) VCCT (13) VCCR(3) VEER(2) Z=50 BEN+(7) Z=50 BEN-(8) +3.3V 130 130 82 82 Z=50 TXP TD+(10) Z=50 TXN +3.3V 130 130 BM Laser Driver TD-(12) 82 82 SerDes 82 +3.3V 82 RXP Z=50 Z=50 RXN 130 RD+(5) 0.1uF RD-(6) 0.1uF CM Limiting Amplifier 130 G- PON MAC +3.3V 10K SD(4) +12V PON_ LOS 100uH 10uF 0.1uF VDD_ 12V(17) 10uF 0.1uFVEEA (1, 20) Mini- SMB Jack Connector +3.3V PON_ SDA PON_ SCL RF Amplifier +3.3V 2 x 4.7-10K PON_INT PON_ RST MoCA Filter 50K 100K INT(16) RESET(19) SDA(14) SCL(15) Microprocessor Figure 2 Recommended Interface Circuit Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 7 of 18 20-PIN Compact Package GPON ONT Triplexer FTM-9823T-CGH(i)(G) Class B+ attenuation range: 13-28dB Preliminary Data Sheet Document Confidential Level: In public May 14. 2007 Template ver. 1e Pin Definitions Compact package bottom view in Figure 3 shows the pin information of electrical interface and mounting studs. Functions are described in Table 9 with some accompanying notes. Figure 3 Compact Package Planform Table 10 - Pin Function Definitions Pin No. Name 1 VEEA Common Ground Description 2 VEER Digital Receiver Signal Ground 3 VCCR Digital Receiver Power Supply (+3.3V) 4 SD 5 RD+ Non-inverted Receiver Data Output 6 RD- Inverted Receiver Data Output 7 BEN+ Non-inverted Burst Enable Input 8 BEN- Inverted Burst Enable Input 9 VEET Digital Transmitter Signal Ground Digital Receiver Signal-Detected Indication 10 TD+ Non-inverted Transmitter Data Input 11 VEET Digital Transmitter Signal Ground 12 TD- Inverted Transmitter Data Input 13 VCCT Transmitter Power Supply (+3.3V) 14 SDA Data Line of I2C interface 15 SCL Clock Line of I C interface 16 INT Microprocessor Interrupt Output 17 VDD_12V 18 N.C 19 RESET 2 Notes 1 2 3 4 4 5 6 CATV Receive Power Supply (+12V) N.C Reset Input to Microprocessor Fiberxon Proprietary and Confidential, Do Not Copy or Distribute 7 Page 8 of 18 20-PIN Compact Package GPON ONT Triplexer FTM-9823T-CGH(i)(G) Class B+ attenuation range: 13-28dB Preliminary Data Sheet Document Confidential Level: In public 20 VEEA Mini SMB RF Output May 14. 2007 Template ver. 1e Common Ground CATV Receiver RF Analog Output (75Ω) 8 Note 1: LVTTL logic output, with internal 3.3KΩ pull-up resistor. Optical Signal-Detected: High; Optical Signal Loss: Low Note 2: CML logic output, AC coupled internally. (See Recommended Interface Circuit) Note 3: LVPECL differential transmitter burst-mode control signal input. DC coupled internally. (See Recommended Interface Circuit) and (See Timing Parameter Definition in Burst Mode Sequence) Note 4: Compatible with LVPECL input, DC coupled internally (See Recommended Interface Circuit and Table 9 - Electrical Input/Output Coupling Mode) Note 5: I2C interface, they should be pulled up with two 4.7K-10KΩ resistors on the host board. Note 6: LVTTL interrupt output, generated by built-in microprocessor, with internal 100KΩ pull-up resistor, active low. Note 7: LVTTL reset input to microprocessor, with Internal 50 KΩ pull-up resistor, active low. Note 8: Mini SMB Jack connector. Mechanical Design Diagram The form factor is 20-PIN compact package with pigtail fiber. The pigtail fiber has a length of 1000±100mm and 30mm minimum bending radius. The fiber connector type is SC/APC. The heat-sink can be added on the surface of the module by user or provided by Fiberxon. The mechanical design diagram is shown in Figure 4. (Dimension in mm) Figure 4 Mechanical Design Diagram Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 9 of 18 20-PIN Compact Package GPON ONT Triplexer FTM-9823T-CGH(i)(G) Class B+ attenuation range: 13-28dB Preliminary Data Sheet May 14. 2007 Document Confidential Level: In public Template ver. 1e Table 11 - Pigtail Fibre Characteristics Parameter Min. Mode Field Diameter Typical Max. Unit 9 µm Cladding Diameter 125 µm Jacket Diameter 0.9 mm Bending Radius of Pigtail Fiber 30 mm Tension Force on Pigtail Fiber Pigtail Fiber Length 900 Optical Return Loss (APC type) -1310nm 55 1000 1 Kg 1100 mm dB EEPROM Information The SFP MSA defines a 256-byte memory map in EEPROM describing the transceiver’s capabilities, standard interfaces, manufacturer, and other information, which is accessible over a 2 wire serial interface at the 8-bit address 1010000X (A0h). The memory contents refer to Table 11. Table 12 - EEPROM Serial ID Memory Contents (A0h) Data Addr 0~11 12 Name Of filed Customer Part BR, Upstream 1.244GHz Vendor Name FF FF FF FF FF FF FF FIBERXON INC. FF Vendor OUI 00 00 00 FTM9823TCGHG Vendor PN FTM9823TCGHi FTM9823TCGHiG 56~59 60~61 46 49 42 45 52 58 4F 4E 20 49 4E 43 2E 20 20 20 Reserved FTM9823TCGH 40~55 0C Reserved 36 37~39 Hex 02 04 0B 20 20 20 20 20 20 20 20 20 Number 13~19 20~35 Coded value Vendor rev Digital TX Wavelength 62 46 54 4D 39 38 32 33 54 43 47 48 20 20 20 20 20 46 54 4D 39 38 32 33 54 43 47 48 47 20 20 20 20 46 54 4D 39 38 32 33 54 43 47 48 69 20 20 20 20 46 54 4D 39 38 32 33 54 43 47 48 69 47 20 20 20 0006 30 30 30 36 1310nm 05 1E Reserved FF 63 CC_BASE X XX 64~65 Options TX_DISABLE,TX_FAULT,Loss of Signal 00 1C 66 BR, max 00 Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 10 of 18 20-PIN Compact Package GPON ONT Triplexer FTM-9823T-CGH(i)(G) Class B+ attenuation range: 13-28dB Preliminary Data Sheet May 14. 2007 Document Confidential Level: In public 67 BR, min 68~83 Vendor SN Template ver. 1e 00 XXXXXXXXXXXXXXXX XX… XX (16bytes) 84 Year XX 85 Year XX 86 Month XX Month XX Day XX 89 Day XX 90 <Space> 20 91 <Space> 20 87 88 92 Date code Diagnostic Internally Calibrated; Average Power Monitoring Type Monitored 93~94 28 Reserved 00 00 95 CC_EXT X XX 96 BR, Downstream 2.488GHz 18 97~101 102 103 104 Reserved Low Video Input Power High Video Input Power Nominal RF Tilt 105~108 109 -8dBm (1LSB=0.1dBm) B0 2dBm(1LSB=0.1dBm) 14 2(1LSB=0.1dB) 14 Reserved Video PD 00 2F 03 66 X (1LSB=0.01mA/mW/) Responsivity 110~121 122 05 D2 06 13 62 Reserved Firmware Version XX FF… FF (12 bytes) 20 123~127 14 Reserved FF FF FF FF FF Note 1: The check code shall be the low order 8 bits of the sum of the contents of all the bytes from byte 0 to byte 62, inclusive. Note 2: The check code shall be the low order 8 bits of the sum of the contents of all the bytes from byte 64 to byte 94, inclusive. Monitoring Specification The field can be accessible over a 2 wire serial interface at the 8-bit address 1010001X (A2h) The reserved bits and bytes are internal used for Fiberxon, and MUST NOT be changed. Table 13 - EEPROM Serial ID Memory Contents (A2h) Addr Name Of filed 0~1 Temp High Alarm Threshold 2~3 Temp Low Alarm Threshold Coded value Hex 90℃ (1LSB=1/256℃) (C-Temp) 5A 00 105℃ (1LSB=1/256℃) (I-Temp) 69 00 -5℃(1LSB=1/256℃) (C-Temp) FB 00 Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 11 of 18 20-PIN Compact Package GPON ONT Triplexer FTM-9823T-CGH(i)(G) Class B+ attenuation range: 13-28dB Preliminary Data Sheet May 14. 2007 Document Confidential Level: In public Template ver. 1e -40℃(1LSB=1/256℃) (I-Temp) D8 00 85℃ (1LSB=1/256℃) (C-Temp) 55 00 100℃ (1LSB=1/256℃) (I-Temp) 64 00 0℃(1LSB=1/256℃) (C-Temp) 00 00 -30℃(1LSB=1/256℃) (I-Temp) E2 00 4~5 Temp High Warning Threshold 6~7 Temp Low Warning Threshold 8~9 Voltage High Alarm Threshold 3.6V(1LSB=100uV) 8C A0 10~11 Voltage Low Alarm Threshold 3.0V(1LSB=100uV) 75 30 12~13 Voltage High Warning Threshold 3.465V(1LSB=100uV) 87 5A 14~15 Voltage Low Warning Threshold 3.135V(1LSB=100uV) 7A 76 16~17 Bias High Alarm Threshold 70mA(1LSB=2uA) 88 B8 18~19 Bias Low Alarm Threshold 0mA(1LSB=2uA) 00 00 20~21 Bias High Warning Threshold 60mA(1LSB=2uA) 75 30 22~23 Bias Low Warning Threshold 0.5mA(1LSB=2uA) 00 FA 24~31 Reserved 9C 40 09 CF 7B 84 0C 5A 32~33 RX Power High Alarm Threshold 0.5mW (1LSB=0.1uW) 13 88 34~35 RX Power Low Alarm Threshold 0.001mW (1LSB=0.1uW) 00 0A 36~37 RX Power High Warning Threshold 0.158mW (1LSB=0.1uW) 06 2C 38~39 RX Power Low Warning Threshold 0.00158mW (1LSB=0.1uW) 00 10 40~41 Reserved 9C 40 42~55 Reserved FF …FF (14 bytes) 56~75 Digital RX Optical Power Calibration 76~79 Laser Bias Current Calibration 01 00 00 00 80~83 Reserved 01 00 00 00 84~87 Temperature Calibration 01 00 00 00 88~91 Power Supply Voltage Calibration 01 00 00 00 92~94 Reserved FF FF FF 95 CC_EXT 96~97 Temperature Monitor 98~99 Vcc Monitor 100~101 TX Bias Monitor 102~103 104~105 00 00 00 00 00 00 00 00 00 00 00 00 3F80 00 00 00 00 00 00 X XX XX (1LSB=1/256℃) XX XX XX(1LSB=100uV) XX XX XX(1LSB=2uA) XX XX Reserved RX Power (Digital part) 106~109 XX XX XX(1LSB=0.1uW) Reserved XX XX XX XX FF FF Status & Control Bits //bit6=Soft_Tx_Dis, High active, '0' default; 110 111 //bit5=reserved; //bit4=reserved; //bit3=reserved; //bit2=TX_Fault, // bit1=LOS; //bit0=Data_Ready, Reserved Fiberxon Proprietary and Confidential, Do Not Copy or Distribute 00 FF Page 12 of 18 20-PIN Compact Package GPON ONT Triplexer FTM-9823T-CGH(i)(G) Class B+ attenuation range: 13-28dB Preliminary Data Sheet May 14. 2007 Document Confidential Level: In public Template ver. 1e Digital Monitor Alarm Flag Bits //bit7=Temp_High_AL; 112 //bit6=Temp_Low_AL; //bit5=Vcc_High_AL; //bit4=Vcc-Low_AL; //bit3=Tx_Bias_High_AL; //bit2=Tx_Bias_Low_AL; 00 //bit1=Tx_PWR_High_AL; //bit0=Tx_PWR_Low_AL; Digital Monitor Alarm Flag Bits 113 //bit7=Rx_PWR_High_AL; //bit4=VAPD_SHDN_FLAG //bit6=Rx_PWR_Low-AL; 00 (Note 5) 114~115 Reserved FF FF Digital Monitor Warning Flag Bits 116 117 //bit7=Temp_High_WN; //bit6=Temp_Low_WN; //bit5=Vcc_High_WN //bit4=Vcc-Low_WN //bit3=Tx_Bias_High_WN //bit2=Tx_Bias_Low_WN Digital Monitor Warning Flag Bits //bit7=Rx_PWR_High_WN; //bit6=Rx_PWR_Low_WN; 00 00 118~119 Reserved FF FF 120~127 Vendor specific FF FF FF FF FF FF FF FF 128~129 1555nm Optical Power High Alarm Threshold 3.0dBm (1LSB=0.1uW) 4D F0 130~131 1555nm Optical Power Low Alarm Threshold -9dBm (1LSB=0.1uW) 04 EA 132~133 1555nm Optical Power High Warn Threshold -8dBm (1LSB=0.1uW) 3D E8 134~135 1555nm Optical Power Low Warm Threshold 2dBm (1LSB=0.1uW) 06 30 136~137 RF Power High Alarm Threshold 103.4dBuV(1LSB=0.1dBuV) 04 0A 138~139 RF Power Low Alarm Threshold 87.4dBuV (1LSB=0.1dBuV) 03 6A 140~141 RF Power High Warning Threshold 100.4dBuV(1LSB=0.1dBuV) 03 EC 142~143 RF Power Low Warning Threshold 90.4dBuV (1LSB=0.1dBuV) 03 88 144~151 Reserved 152~171 1555nm Optical Power Calibration 172~191 RF Level Calibration 192~195 Reserved 196~197 VDD_12V Power Supply Monitor 198 Reserved 199 TX_Mode 200 RF_Setting (Note 2) 201~202 Analog part Optical Power 203~204 RF Power 205 206~207 //bit2=Video_EN, control; '1' default; 67 20 54 60 62 70 59 00 00 00 00 00 00 00 00 00 00 00 00 3F80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 3F80 00 00 00 00 00 00 FF FF FF FF XX(1LSB = 500uV) XX XX FF X (0= Mode 0; 1= Mode 1; 2= Mode 2) 0(1LSB=0.1dB) 0 XX(1LSB=0.1uW) XX XX XX(1LSB=0.1dBuV) XX XX (Note 3) Reserved Fiberxon Proprietary and Confidential, Do Not Copy or Distribute D4 XX XX Page 13 of 18 20-PIN Compact Package GPON ONT Triplexer FTM-9823T-CGH(i)(G) Class B+ attenuation range: 13-28dB Preliminary Data Sheet May 14. 2007 Document Confidential Level: In public Template ver. 1e //bit3=RF_High_AL; //bit2=RF_Low_AL; //bit1=1555nm_Optical_Power_High_AL; 208 00 //bit0=1555nm_Optical_Power_Low_AL; (Video Monitor Alarm Statue Bits) //bit3=RF_High_WN; //bit2=RF_Low_WN; //bit1=1555nm_Optical_Power _High_WN; 209 00 //bit0=1555nm_Optical_Power _Low_WN; (Video Monitor Warning Statue Bits) 210 Mask1 Interrupt Mask for Byte 112 (1 = enabled) FF 211 Mask2 Interrupt Mask for Byte 113 (1 = enabled) FF 212 Mask3 Interrupt Mask for Byte 116 (1 = enabled) FF 213 Mask4 Interrupt Mask for Byte 117 (1 = enabled) FF 214 Mask5 Interrupt Mask for Byte 208 (1 = enabled) FF 215 Mask6 Interrupt Mask for Byte 209 (1 = enabled) FF 216~217 Reserved //bit7= APD_SHDN_CLR FF FF (Note 6) ; //bit1=SAVE data, Active high; '0' default; (Note 4) 218 00 //bit0=Software Reset, Active high; '0' default; 219~221 FirmWare_Version 20 00 14 221~247 User Writable FF……..FF(27 bytes) 248~255 Vender Specific Control Functions FF FF FF FF FF FF FF FF Note1: The reserved bits and bytes are internal used for Fiberxon, and must not be changed. Note2: It’s used for the CATV RF level setting. We set the RF-Setting =0 as the following condition: 1) Total OMI is 23.2%; and 2) Total RF output is 38dBmV. Note3: The bit is used for the Video disable. “1” for enable, “0” for disable. Note4: When the A2 is changed, the user must set this bit as “1” to save the A2 data into the flash if the user wants to save the configure data. Note5: When the optical power is great than -3dBm, the APD protection function will works, and the APD power supply will be cut off, and VAPD_SHDN_FLAG =1. Note6: When VAPD_SHDN_CLEAR is set to 1, APD circuit will works, and VAPD_SHDN_CLEAR will be set to 0 automatically. Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 14 of 18 20-PIN Compact Package GPON ONT Triplexer FTM-9823T-CGH(i)(G) Class B+ attenuation range: 13-28dB Preliminary Data Sheet Document Confidential Level: In public May 14. 2007 Template ver. 1e Ordering Information Part No. Product Description 1310nm(TX)/1490nm(Digital RX)/1555nm(Analog RX), SC/APC Pigtailed Compact Package FTM-9823T-CGH for G-PON ONT 1244/2488M Class B+ application, 0°C ~ 70°C, Tx DC Coupling, Rx AC Coupling 1310nm(TX)/1490nm(Digital RX)/1555nm(Analog RX), SC/APC Pigtailed Compact Package FTM-9823T-CGHG for G-PON ONT 1244/2488M Class B+ application, 0°C ~ 70°C, Tx DC Coupling, Rx AC Coupling, RoHS-6 Compliance 1310nm(TX)/1490nm(Digital RX)/1555nm(Analog RX), SC/APC Pigtailed Compact Package FTM-9823T-CGHi for G-PON ONT 1244/2488M Class B+ application, -40°C ~ 85°C, Tx DC Coupling, Rx AC Coupling 1310nm(TX)/1490nm(Digital RX)/1555nm(Analog RX), SC/APC Pigtailed Compact Package FTM-9823T-CGHiG for G-PON ONT 1244/2488M Class B+ application, -40°C ~ 85°C, Tx DC Coupling, Rx AC Coupling, RoHS-6 Compliance Related Documents For further information, please refer to the following documents: ITU-T G.984.2 ITU-T G.984.2 Amendment 1 ITU-T G.983.3 Obtaining Document You can visit our website: http://www.fiberxon.com/ Or contact with Fiberxon, Inc. America Sales Office listed at the end of documentation to get the latest documents. Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 15 of 18 20-PIN Compact Package GPON ONT Triplexer FTM-9823T-CGH(i)(G) Class B+ attenuation range: 13-28dB Preliminary Data Sheet Document Confidential Level: In public May 14. 2007 Template ver. 1e Revision History Reversion Initiate Review Approve Subject Release Date Pre 1a Johnny Yang Peter Tang Peter Tang Initial datasheet (temporary) Dec.2, 2005 (Doc No. DS3523003-1a) Revised datasheet 1. Update operating temperature to operating case temperature. 2. Modify “Optical Return Loss (1310nm)” to Pre 1b Johnny Yang Peter Tang Peter Tang “Transmitter Reflectance” in Table 4. Dec.15, 2005 3. Append “Tolerance to Reflected Optical Power” and “Receiver Reflectance” in Table 5. 4. Modify “Signal-Detected Voltage” in Table 5. 5. Update Figure 1. (Doc No. DS3523003-1b) (temporary) Pre 2a Johnny Yang Peter Tang Peter Tang 1. Update the package structure (Page 9). 2. Delete 5V power supply, add 3.3V microcontroller power supply(optional). Mar.7,2006 (Doc No. DS3523003-2a) Pre 2b Johnny Yang Peter Tang Peter Tang 1. Update the EEPROM definition 2. Add FTM-9823T-CGHiG May 4,2006 (Doc No. DS3523003-2b) Pre 2c Johnny Yang Peter Tang Peter Tang Append the Power_levelling function Jul. 10,2006 Update the EEPROM 1, update A0[56~59], the version is 0006. 2, update A0[96~101], the value(Hex) is 18 05 D2 06 13 62. 3, update A0[104], the tilt is 2dB. 4, update A0[122], the Firmware version is 20. 5, update A2[18~19], the bias alarm threshold is 0mA. 6, update A2[22~23], the bias warn threshold is 0.5mA. Pre 2d Johnny Yang Peter Tang Peter Tang 7, update A2[24~31], the value is 9C 40 09 CF 7B 84 Jul. 25,2006 0C 5A. 7, update A2[42~43], the value is reserved(FF FF). 8, update A2[113], add bit4=VAPD_SHDN_FLAG. 9, update A2[117], delete bit4=VAPD_SHDN_FLAG. 10, update A2[116], delete bit1=Tx_PWR_High_WN and bit0=Tx_PWR_Low_WN. 11, update A2[144~151], the value is(Hex) 67 20 54 60 62 70 59. 12, update A2[192~193], the value is reserved(FF FF). Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 16 of 18 20-PIN Compact Package GPON ONT Triplexer FTM-9823T-CGH(i)(G) Class B+ attenuation range: 13-28dB Preliminary Data Sheet Document Confidential Level: In public May 14. 2007 Template ver. 1e 13, update A2[196~197], add VDD_12V monitor value 14, update A2[205], the value (Hex) is D4. 15, update A2[210~215], add the interrupt mask. 16, update A2[219~220], the Firmware version is 20. 1, Update Table 4 POUT spec., the MODE2 range is 2e Johnny Yang Peter Tang Peter Tang updated form (-5.5~-1dBm) to (-5.5~0dBm). Aug.4,2006 2, Update Table 6 CNR spec., and is updated form 46dB to 45dB. Revised datasheet 1, Add FTM-9823T-CGH, FTM-9823T-CGHG 2, Update the value of overload in Table 4 from -4 dBm 1h Jacob Cai Johnny Yang Peter Tang May 14,2007 to -7dBm 3, Correct “SMB” in the Note 2 of Table 6 to “Mini SMB” 4, Change the Power leveling mechanism to optional (Doc No. DS3633003-1h) Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 17 of 18 20-PIN Compact Package GPON ONT Triplexer FTM-9823T-CGH(i)(G) Class B+ attenuation range: 13-28dB Preliminary Data Sheet Document Confidential Level: In public May 14. 2007 Template ver. 1e © Copyright Fiberxon Inc. 2007 All Rights Reserved. All information contained in this document is subject to change without notice. The products described in this document are NOT intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. The information contained in this document does not affect or change Fiberxon’s product specifications or warranties. Nothing in this document shall operate as an express or implied license or indemnity under the intellectual property rights of Fiberxon or third parties. All information contained in this document was obtained in specific environments, and is presented as an illustration. The results obtained in other operating environment may vary. THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN ”AS IS” BASIS. In no event will Fiberxon be liable for damages arising directly from any use of the information contained in this document. Contact U.S.A. Headquarters: 5201 Great America Parkway, Suite 340 Santa Clara, CA 95054 U. S. A. Tel: 408-562-6288 Fax: 408-562-6289 Or visit our website: http://www.fiberxon.com/ Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 18 of 18