FREQUENCY DOUBLER MODEL FD9xxN-1 Available as: FD9xxN-1, Connectorized Housing (ND) FD9xMN-1, Without Connectors FD9xPN-1, With Removable Connectors Features RF Input: 1.5 to 10.0 GHz RF Output: 3.0 to 20.0 GHz Input Power: +11 dBm Operating Temperature: -55 ºC to +85ºC Electrical Specifications (1) : Parameter Insertion Loss: Conditions Input (GHz) (2) Fundamental Isolation: (3) Third Harmonic Suppression: (4) Input VSWR: Input Power Range: 2.5 - 9.0 1.5 - 10.0 1.5 - 7.0 7.0 - 10.0 1.5 - 10.0 1.5 - 5.0 5.0 - 10.0 1.5 - 10.0 Output (GHz) Min 5.0 - 18.0 3.0 - 20.0 1.5 - 7.0 7.0 - 10.0 3.0 - 20.0 3.0 - 10.0 10.0 - 20.0 3.0 - 10.0 Specifications 22 dB 19 dB 20 dBc Notes: Typical Max 11.0 dB 12.0 dB 30 dB 25 dB 33 dBc 2.0:1 1.5:1 +11 dBm +17 dBm 12.5 dB 14.0 dB FD96 FD97 1. Specifications are guaranteed when tested as a doubler in a 50 Ohm system at +25ºC with the nominal input power. Specifications indicated as typical are not guaranteed. 2. Insertion loss typically degrades less than 0.5 dB at +100ºC and improves less than 0.5 dB at -55º C. 3. Fundamental isolation is referenced to the fundamental input. 4. Third Harmonic Suppression is referenced to the second harmonic output. Case Outline Typical Performance at 25ºC (FD9xxN-1) All dimensions are in inches and [mm]. Relative Loss vs. Input Power (dB) 0 0.5 6 GHz Input 1.0 1.5 2.0 Insertion Loss (dB) 9 -5 dB 10 10 20 11 30 12 40 13 50 1.5 3.0 In-GHz Out-GHz 10.0 20.0 Output VSWR 1.0 0 1.5 0.5 2.0 1.0 3.0 1.5 4.0 2.0 10 3.0 GHz Third Harmonic Suppression (dBc) 20.0 1.5 30 2.0 40 3.0 50 4.0 1.5 4.5 In-GHz Out-GHz 7.0 21.0 In-GHz 1.5 +5 dB 10.0 Relative Loss vs. Input Power (dB) 2 GHz Input -5 dB NOM. +5 dB Input VSWR 1.0 20 NOM. Fundamental Isolation (dB) 1.5 Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, FL 32905 · PH (888) 553-7531 · Fax (888) 553-7532 GHz 10.0 12/21/05 www.SpectrumMicrowave.com Spectrum Microwave (Europe) · 2707 Black Lake Place · Philadelphia, PA 19154 · PH (215) 464-4000 · Fax (215) 464-4001