REMEC Input 2.0 to 10.0 GHz Output 4.0 to 20.0 GHz Frequency Doubler High Isolation, In-line Output Electrical Specifications : (1) Conditions Parameter Insertion Loss:(2) Fundamental Isolation: (3) Third Harmonic Suppression: (4) Input VSWR: Input Power: Input (GHz) 2.0-9.0 2.0-10.0 2.0-10.0 2.0-10.0 Output (GHz) 4.0-18.0 4.0-20.0 4.0-10.0 4.0-20.0 2.0-5.0 5.0-10.0 2.0-10.0 4.0-10.0 10.0-20.0 4.0-20.0 Specifications Min 25 dB 20 dBc Typical 11.0 dB 11.5 dB 32 dB 26 dBc 2.5:1 1.8:1 +11 dBm +17 dBm FD9xSMx-1 Max 13.0 dB 15.0 dB Input Power 6 = +11 dBm 7 = +17 dBm FD96 FD97 Notes: 1. Specifications are guaranteed when tested as a doubler in a 50 Ohm system at +25°C with nominal input power. Specifications indicated as typical are not guaranteed. 2. Insertion loss typically degrades less than 0.5 dB at +100°C and improves less than 0.5 dB at -55°C. 3. Fundamental isolation is referenced to the fundamental input. 4. Third Harmonic Suppression is referenced to the second harmonic output. 5. For SMH models, isolation loss for 2-10-0 GHz is 13.5 dB max, fundamental isolation is 20 dB min. D = No Cover H = With Cover FD9xSMD-1 Outline: SMDC4 FD9xSMH-1 Outline: SMDT4 Typical Performance at 25°C In-GHz All dimensions are in inches and [mm]. Specifications subject to change without notice. 1590 Buckeye Drive - Milpitas, CA 95035 - TEL: 408-432-9898 - FAX: 408-432-1551 [email protected] - www.remec.com 3-60