Triple Balanced Mixer Model M24T RF 1.0 to 3400 MHz RF Band Electrical Specifications : (1) Conditions Parameter SSB Conversion loss: Isolation LO to RF: LO to IF: RF to IF: Input 1-dB Compression Point: Input Third Order Intercept Point: LO Power: (4) (2)(3) Specifications RF (MHz) LO (MHz) IF (MHz) 1.0-1500 1.0-1000 1.0-1500 1.0-3400 1.0-2000 1.0-3400 Min 1.0-1500 1.0-3400 1.0-1500 1.0-3400 1.0-3400 1.0-1500 1.0-3400 1.0-1500 1.0-3400 1.0-3400 1.0-3400 1.0-3400 1.0-2000 +1 dBm 1.0-3400 1.0-3400 1.0-3400 1.0-3400 1.0-2000 1.0-2000 +14 dBm +10 dBm 30 25 30 25 Notes: 1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system at +25˚C with the nominal LO power. Specifications indicated as typical are not guaranteed. 2. Noise figure is nominally within ±0.5 dB of the SSB conversion loss for IF frequencies greater than 10 MHz. 3. Conversion loss typically degrades less than ±0.5 dB at +100˚C and improves less than 0.5 dB at -55˚C. 4. Usable LO drives are up to 2 dB below and 3 dB above nominal. M24T Typical 7.5 dB 8.5 dB dB dB dB dB 38 35 35 32 30 Max 9.5 dB 10.5 dB dB dB dB dB dB Typical Performance at 25˚C Outline: TO-8 SPECTRUM All dimensions are in inches and [mm]. Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, FL 32905 · PH (888) 553-7531 · Fax (888) 553-7532 www.SpectrumMicrowave.com Spectrum Microwave (Europe) · 2707 Black Lake Place · Philadelphia, PA 19154 · PH (215) 464-4000 · Fax (215) 464-4001