Double Balanced Mixer Model M53T RF Band RF 10 to 1500 MHz Electrical Specifications : (1) Conditions Parameter SSB Conversion loss: Isolation LO to RF: (2)(3) RF (MHz) 10-1500 (3) IF (MHz) DC-800 Min 30 28 30 28 25 10-500 500-900 900-1500 10-500 500-1500 LO to IF: Input 1-dB Compression Point: Desensitization Point: Input Third Order Intercept Point: LO Power: LO(MHz) 10-1500 Specifications Typical 7.0 dB dB dB dB dB dB 10-1500 10-1500 DC-800 +3.5 dBm 10-1500 10-1500 DC-800 +1.5 dBm 10-1500 10-1500 10-1500 10-1500 DC-800 DC-800 +13 dBm +7 dBm Notes: 1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system at +25˚C with the nominal LO power. Specifications indicated as typical are not guaranteed. 2. SSB Noise figure is nominally within ±0.5 dB of the SSB conversion loss for IF frequencies > 10 MHz. 3. Usable LO drives are up to 2 dB below and 3 dB above nominal. Max 8.5 dB Typical Performance at 25˚C Outline: TO-8 M53T SPECTRUM All dimensions are in inches and [mm]. Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, FL 32905 · PH (888) 553-7531 · Fax (888) 553-7532 www.SpectrumMicrowave.com Spectrum Microwave (Europe) · 2707 Black Lake Place · Philadelphia, PA 19154 · PH (215) 464-4000 · Fax (215) 464-4001