DNK1201M Surface Mount Type/ High-output IRED for Automotive Features Package Product features 10.2 x 6.0 mm (h=5.5 mm) type, Water clear epoxy ・Outer Dimension 10.2 x 6.0 x 5.5mm ( L x W x H ) ・Big Lenz Type ・Wide operation temperature range. Storage Temperature : -40℃～120℃ Operating Temperature : -30℃～ 95℃ ・High Total Output Power : 40mW TYP. (IF=100mA) ・Operation at 100mA is possible at 85℃. ・Lead–free soldering compatible ・RoHS compliant Peak Wavelength 870nm Half Intensity Angle θx = 42 deg., Die materials GaAlAs Rank grouping parameter Sorted by radiant intensity per rank taping Assembly method Auto pick & place machine (Auto Mounter) Soldering methods Reflow soldering and manual soldering θy = 42 deg. ※Please refer to Soldering Conditions about soldering. Taping and reel 900pcs per reel in a 24mm width tape. (Standard) Reel diameter:φ330mm ESD 2kV (HBM) Recommended Applications Automotive (Camera of Door Mirror, Camera of Crew Detection, Camera of Driver Watch, Rear Head Phone, Back Monitor, Various Sensors) 2009.3.25 Page 1 DNK1201M Surface Mount Type/ High-output IRED for Automotive Absolute Maximum Ratings (Ta=25℃) Item Symbol Absolute Maximum Ratings Unit Power Dissipation Pd 340 mW Forward Current Ta=25℃ Ta=95℃ Pulse Forward Current ※1 200 IF mA 80 IFRM 1,000 mA Derating (Ta=25℃ or higher) ⊿ IF 1.71 mA/℃ ⊿ IFRM 8.60 mA/℃ Reverse Voltage VR 5 V Operating Temperature Topr -30～ +95 ℃ Storage Temperature Tstg -40～ +120 ℃ ※ 1 IFRM Measurement condition : Pulse Width≦ 100μ s, Duty≦ 1/100 Electro-Optical Characteristics Item Forward Voltage IF=100mA Symbol VF Characteristics MIN. 1.3 TYP. 1.5 MAX. 1.7 Unit V Pulse Forward Voltage IFRM=1,000mA VFM MAX. 3.4 V Reverse Current VR =5V IR MAX. 200 μA MIN. 40 TYP. 55 MAX. (86) Radiant Intensity 2009.3.25 Conditions (Ta=25℃) IF=100mA IE mW/sr Total Output Power IF=100mA Po TYP. 40 mW Peak Wavelength IF=100mA λp TYP. 870 nm Spectral Half-width IF=100mA ⊿λ TYP. 45 nm Half Intensity Angle IF=100mA 2θ 1/2 TYP. Cut-off Frequency IF=100mADC±5mA, -3db from 1MHz fc Response Time IF=100mA tr/tf 42(θ x) 42(θ y) MIN. (40) TYP. 55 TYP. 7 deg. MHz ns Page 2 DNK1201M Surface Mount Type/ High-output IRED for Automotive Radiant Intensity Rank (Ta=25℃) IE（mW/sr） Rank Condition MIN. MAX. A 40 54 B 52 70 C 64 (86) IF = 100mA ※Please contact our sales staff concerning rank designation. 2009.3.25 Page 3 DNK1201M Surface Mount Type/ High-output IRED for Automotive Technical Data Spectral Distribution Spatial Distribution Example Relative Intensity vs. Wavelength Condition : Ta = 25℃, IF = 100mA Relative Intensity Condition : Ta = 25℃ 0 100 -30 30 -60 60 50 -90 -100 0 -50 0 50 100 90 Wavelength [nm] Forward Voltage vs. Forward Current Pulse Forward Voltage vs. Pulse Forward Current Forward Current IF(mA) Forward Voltage : VF(V) 2009.3.25 Condition : Ta=25℃, tw≦100μs, Duty≦1/100 Pulse Forward Current IFRM(mA) Condition : Ta=25℃ Pulse Forward Voltage : VFM(V) Page 4 DNK1201M Surface Mount Type/ High-output IRED for Automotive Technical Data Duty Ratio vs. Pulse Forward Current Ambient Temperature vs. Forward Current Forward Current : IF (mA) Pulse Forward Current IFRM(mA) Condition : Ta = 25℃, tw ≦ 100μs Ambient Temperature : Ta(℃) Duty Ratio Frequency Condition : Ta = 25℃, IF = 100mADC±5mA Relative Radiant Intensity (dB) Maximum Forward Current : IF MAX. (mA) Derating Ambient Temperature vs. Maximum Forward Current Condition : tw≦100μs Ambient Temperature : Ta(℃) 2009.3.25 Frequency (MHz) Page 5 DNK1201M Surface Mount Type/ High-output IRED for Automotive Technical Data Ambient Temperature vs. Forward Voltage Ambient Temperature vs. Pulse Forward Voltage Condition : IFRM = 1000mA, tw≦100μs, Duty≦1/100 Forward Voltage VF(V) Pulse Forward Voltage VFM(V) Condition : IF = 100mA Ambient Temperature : Ta (℃) Ambient Temperature : Ta (℃) Ambient Temperature vs. Peak Wavelength Ambient Temperature vs. Relative Total Power Ambient Temperature : Ta(℃) 2009.3.25 Condition : IF = 100mA Relative Total Power Peak Wavelength λp (nm) Condition : IF = 100mA Ambient Temperature : Ta (℃) Page 6 DNK1201M Surface Mount Type/ High-output IRED for Automotive Technical Data Forward Current vs. Relative Total Power Pulse Forward Current vs. Relative Total Power Forward Current : IF (mA) 2009.3.25 Condition : tw≦100μs, Duty≦1/100, Ta = 25℃ Relative Total Power Relative Total Power Condition : Ta = 25℃ Pulse Forward Current : IFRM (mA) Page 7 DNK1201M Surface Mount Type/ High-output IRED for Automotive Package Dimensions (Unit: mm) Weight: (1,890)mg Recommended Soldering Pattern Taping Specification (Unit: mm) (Unit: mm) Quantity: 900pcs/ reel (standard) 2009.3.25 Page 8 DNK1201M Surface Mount Type/ High-output IRED for Automotive Reflow Soldering Conditions 1) The above profile temperature gives the maximum temperature of the LED resin surface. Please set the temperature so as to avoid exceeding this range. 2) Total times of reflow soldering process shall be no more than 2 times. When the second reflow soldering process is performed, intervals between the first and second reflow should be short as possible (while allowing some time for the component to return to normal temperature after the first reflow) in order to prevent the LED from absorbing moisture. 3) Temperature fluctuation to the LED during the pre-heating process shall be minimized. Manual Soldering Conditions Iron tip temp. Soldering time and frequency 2009.3.25 350 ℃ 3 s 1 time (MAX.) (30 W Max.) (MAX.) (MAX.) Page 9 DNK1201M Surface Mount Type/ High-output IRED for Automotive Handling Note 1. Handling of the Products Mold resin on the backside of the products has adhesiveness. If dust or your hand is stuck to the backside, please slowly remove the product from there. And if the backside is strongly pushed, it affects the characteristics and reliability. Please be careful in handling. 2. Dirt If dirt sticks to the surface of lens, it affects the radiant intensity. Please don't touch the lens with bare hands. If dirt affects function, please wipe the dirt off carefully not to cause scratches on the lens with lens paper or the like. And if flux is stuck to the lens, please wipe the flux off carefully with alcohol-based cleaner. 3. Dew When the temperature changes suddenly at high temperature and humidity, dew is generated. Because dew is likely to cause reduction in radiant intensity, failure to light up, deterioration of insulation and the like, please care. Because color of lens changes into milky color by rapid cooling at the conditions of high temperature and humidity, please care. 4. Freezing When temperature is below ０℃, water of dew and the like freezes. Because freezing is likely to cause reduction in radiant intensity, failure to light up, deterioration of insulation and the like, please care. 5. Strength When mounting, assembling, cleaning the lens, storing the products and the like, please be careful not to apply mechanical stress and excessive vibration to products. They are likely to cause cracks, delamination and bending terminal. And they are likely to affect the characteristics and reliability badly. 6. Mechanical stress to terminals When storing products and soldering, please be careful not to apply mechanical stress and excessive vibration to terminals. They are likely to cause cracks, delamination and bending terminal. And they are likely to affect the characteristics and reliability badly. 7. Backside Dust is stuck to the backside easily on construction of this product. There is no problem on the characteristic even if dust is stuck to the backside. Please be careful not to wipe off forcibly and not to rub. 8. Moisture Absorption If you use soldering with the over-specified humidity conditions, it affects the characteristics and reliability. Please use with the specified conditions. 9. Discoloration This product might discolor by the heat of reflow and might change to yellowish. But there is no problem on the characteristic and reliability. 10. Application Please stop to use by the applications that the breakdown and the wrong operation might influence the life or the human body. 11. Other When there is a process of supersonic wave welding etc after mounting the product, there is a possibility of affecting on the reliability of junction part in package (junction part of die bonding and wire bonding). Please use after affirming beforehand there is no problem. If this product is used excluding the content described to these specifications, we do not take any responsibility. If you use it excluding these ratings, please consult us beforehand. ★Safety of Near-Infrared Rays★ It is generally said that the near-infrared rays(870nm) used for this product is harmless to humans. But we can not say that direct rays to eyes are always safe as well as the visual light. Please pay attention when the product is used. 2009.3.25 Page 10 DNK1201M Surface Mount Type/ High-output IRED for Automotive Reliability Testing Result Reliability Testing Result Applicable Standard Room Temp. Operating Life EIAJ ED4701/100(101) High Temp. Operating Life EIAJ ED4701/100(101) Low Temp. Operating Life Wet High Temp. Operating Life High Temp. Storage Life EIAJ ED4701/100(101) EIAJ ED4701/100(102) EIAJ ED4701/100(105) EIAJ ED4701/200(201) Low Temp. Storage Life Thermal Shock Testing Conditions Duration Failure Ta = 25℃, IF = 200mA 1,000 h 0/20 Ta = 25℃, IFRM = 1,000mA, (tw=100μs, Duty=1/100) 1,000 h 0/20 Ta = 95℃, IF = 80mA 1,000 h 0/20 Ta = -30℃, IF = 200mA 1,000 h 0/20 Ta = 85℃, 85%, IF = 100mA 1,000 h 0/20 Ta = -40℃ ～ 120℃ (each 15min.) 1,000 cycles 0/20 Ta = 120℃ 1,000 h 0/20 EIAJ ED4701/200(202) Ta = -40℃ 1,000 h 0/20 Resistance to Soldering Heat EIAJ ED4701/300(301) (Pretreatment) Individual standard (Reflow Soldering) Pre-heating 180℃ 120s →Operating Heating 250℃ 5s Electric Static Discharge (ESD) EIAJ ED4701/300(304) C = 100pF, R2 = 1.5KΩ, ±2,000V Vibration, Variable Frequency EIAJ ED4701/400(403) EIAJ ED4701/400(404) Shock Twice 0/20 once each polarity 0/10 2 44.1m/s (4.5G), 20 ～ 500Hz, 20min, XYZ each direction 2 h 0/10 2 3 times 0/10 5000m/s (510G), 0.5ms, 6directions Failure Criteria Items Symbols Radiant Intensity IE Forward Voltage VF Reverse Current IR Cosmetic Appearance - 2009.3.25 Conditions IF Value of each product Radiant Intensity IF Value of each product Forward Voltage VR = Maximum Rated Reverse Voltage V - Failure criteria Testing Min. Value ＜ Initial Value x 0.5 Testing Max. Value ＞ Spec. Max. Value x 1.2 Testing Max. Value ≧ Spec. Max. Value x 2.5 Occurrence of notable decoloration, deformation and cracking Page 11 DNK1201M Surface Mount Type/ High-output IRED for Automotive Special Notice to Customers Using the Products and Technical Information Shown in This Data Sheet 1) The technical information shown in the data sheets are limited to the typical characteristics and circuit examples of the referenced products. It does not constitute the warranting of industrial property nor the granting of any license. 2) For the purpose of product improvement, the specifications, characteristics and technical data described in the data sheets are subject to change without prior notice. Therefore it is recommended that the most updated specifications be used in your design. 3) When using the products described in the data sheets, please adhere to the maximum ratings for operating voltage, heat dissipation characteristics, and other precautions for use. We are not responsible for any damage which may occur if these specifications are exceeded. 4) The products that have been described to this catalog are manufactured so that they will be used for the electrical instrument of the benchmark (OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument). The application of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. needs a high reliability and safety, and the breakdown and the wrong operation might influence the life or the human body. Please consult us beforehand if you plan to use our product for the usages of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. except OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument. 5) In order to export the products or technologies described in this data sheet which are under the “Foreign Exchange and Foreign Trade Control Law,” it is necessary to first obtain an export permit from the Japanese government. 6) No part of this data sheet may be reprinted or reproduced without prior written permission from Stanley Electric Co., Ltd. 7) The most updated edition of this data sheet can be obtained from the address below: http://www.stanley-components.com 2009.3.25 Page 12