TAI-SAW TECHNOLOGY CO., LTD. No.3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 133.2MHz (SMD 5.0×7.0 mm) MODEL NO.: TB0816A Rev. NO. 1.0 A. MAXIMUM RATINGS: 1. Operating Temperature: -40°C to 85°C 2. Storage Temperature: -40°C to 85°C 3. Input Power: 18dBm RoHS Compliant Lead free Lead-free soldering B. ELECTRICAL CHARACTERISTICS: 1. Ambient Temperature: 25 °C Characteristics Min. Center frequency FC MHz Temperature Coefficient ppm/°C Insertion Loss at Fo (including losses in matching circuit) MHz Amplitude ripple variation (Fo +/-100KHz) dBp-p Group Delay variation (Fo +/-100KHz) nsec Relative Attenuation dBc Fc ±250KHz ~ Fc ±400KHz Fc ±400KHz ~ Fc ±600KHz Fc ±600KHz ~ Fc ±800KHz Fc ±800KHz ~ Fc ±3.0MHz Fc ±3.0MHz ~ Fc ±7.0MHz Fc ±7.0MHz ~ Fc ±30.0MHz Source Impedance (Single/Balanced) Ω Load Impedance (Single/Balanced) Ω Value Typ. Max. - 133.2 -0.036 - - 4.5 8.0 - 0.5 1.0 - 300 1000 3 15 20 29 35 40 - 5 16 28 31 42 47 50/200 50/200 - TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document Note 2 C. Frequency Characteristics : 1. S21 Response: (span 60MHz) 2. S21 Response: (span 0.8MHz) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 3. S11 Smith-Chart: (span 5MHz) 4. S22 Smith-Chart: (span 5MHz) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 D. Outline Drawing: 816 Pin I: RF input or balanced input+ Pin J: Ground or balanced inputPin D: RF output or balanced output+ Pin E: Ground or balanced outputPin A, B, C, F, G, H: To be Ground □ : Week Code (Follow the table from planner each year) Unit : mm (week01, 02, 03…52 =>A, B, C…z) △ : Product / Year Code Year 2005 2009 2006 2010 2007 2011 2008 2012 Product Code B b B b TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 E. Matching Circuit Configuration: Zin=Zout=50 ohm L1 Zin I D L2 SAW Filter C1 Zout C2 L1=408nH, C1=27pF, L2=408nH, C2=27pF Zin=Zout=200 ohm L1 Zin I L3 SAW Filter C1 L2 E J C2 D Zout L4 Zin= 200 ohm Zout= 200 ohm L1=L2=280nH, C1=9pF, L3=L4=280nH, C2=9pF TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 F.PACKING: 1.REEL DIMENSION 2.TAPE DIMENSION 816 Direction of feed TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7 G. Recommended Reflow Profile: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 8