1N5391 THRU 1N5399 1.5AMP. Standard Silicon Rectifiers VOLTAGE:50 TO 1000V CURRENT:1.5A AXIAL LEAD DO-15 Specification Features: Case: Epoxy, Molded Weight: 0.4Gram (Approximately) High current capability, Low leakage current High surge current capability Finish: All External Surfaces Corrosion Resistant And Terminal Leads Are 1N53XX KEL DEVICE MARKING DIAGRAM Readily Solderable Lead And Mounting Surface Temperature For Soldering Purposed: 260℃ Max. For 10 Seconds 1/16 Inch From Case 1N53XX : Device Name 1N5391~1N5399 KEL : KEL Logo RoHS Compliant Cathode Indicated By Polarity Band Absolute Maximum Ratings Parameter Maximum Repetitive Peak Reverse Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectifier Current. (0.375” Lead Length @ TA=75℃) Non-repetitive Peak Forward Surge Current. (8.3mS Single Half Sine-wave) Operating Junction and Storage Temperature Range Thermal Resistance (Note 1) (Junction to Ambient) Electrical Characteristics Parameter TA = 25°C unless otherwise noted 1N 1N 1N Symbol 5391 5392 5393 1N 5395 1N 5397 1N 5398 1N 5399 Units VRRM 50 100 200 400 600 800 1000 V VR 50 100 200 400 600 800 1000 V IF(AV) 1.5 A IFSM 50 A TJ, TSTG -65 to +150 °C RθJA 50 °C/W TA = 25°C unless otherwise noted Symbol 1N 5391 1N 5392 1N 5393 1N 5395 1N 5397 1N 5398 1N 5399 Units Reverse Current @VR IR 5 uA Forward Voltage @1.5A VF 1.1 V CT 25 pF Total Capacitance (Note 2) @VR=4V, f=1MHz NOTE: (1) Thermal resistance from junction to ambient at 0.375” lead length, vertical P.C. board mounted (2) Measured at 1 MHz and applied reverse voltage of 4.0V D.C. Apr.2008 Release / Orig. Page 1 1N5391 through 1N5399 Series P re lim in ary Da t a S he et P re lim in ary Da t a S he et Package Outline Package Case Outline D C A B DO-15 DO-15 DIM Millimeters Inches Min Max Min Max A 0.70 0.90 0.028 0.034 B 5.80 7.60 0.230 0.300 C 25.40 --- 1.000 --- D 2.60 3.60 0.104 0.140 Apr.2008 Release / Orig. Page 2