UF5400 THRU UF5408 3.0AMP. Ultrafast Rectifiers（GPP） VOLTAGE:50 TO 1000V CURRENT:3.0A AXIAL LEAD DO-201AD Specification Features: Case: Epoxy, Molded Weight: 1.2Gram (Approximately) High current capability, Low leakage current High surge current capability UF54XX KEL DEVICE MARKING DIAGRAM Finish: All External Surfaces Corrosion Resistant And Terminal Leads Are Readily Solderable Lead And Mounting Surface Temperature For Soldering Purposed: 260℃ Max. For 10 Seconds 1/16 Inch From Case UF54XX: Device Name UF5400~ UF5408 KEL RoHS Compliant Cathode Indicated By Polarity Band Absolute Maximum Ratings Parameter Maximum Repetitive Peak Reverse Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectifier Current. (0.375” Lead Length @ TA=75℃) Non-repetitive Peak Forward Surge Current. (8.3mS Single Half Sine-wave) Operating Junction and Storage Temperature Range Thermal Resistance (Junction to Ambient) (Note 1) Electrical Characteristics TA = 25°C unless otherwise noted UF UF UF Symbol 5400 5401 5402 UF 5406 UF 5407 UF 5408 Units VRRM 50 100 200 400 600 800 1000 V VR 50 100 200 400 600 800 1000 V IF(AV) 3.0 A IFSM 150 A TJ, TSTG -65 to +150 °C RθJA 20 °C/W Symbol Reverse Current @VR IR Forward Voltage @3A VF Maximum Reverse Recovery Time (Note 2) TRR @VR=4V, f=1MHz UF 5404 TA = 25°C unless otherwise noted Parameter Total Capacitance : KEL Logo CT UF 5400 UF 5401 UF 5402 UF 5404 UF 5406 UF 5407 5 1.0 UF 5408 Units uA 1.3 50 50 1.7 V 75 nS pF Apr. 2008 Release / Orig Page 1 UF5400 through UF5408 Series P re lim in ary Da t a S he et P re lim in ary Da t a S he et NOTE: (1) Thermal resistance from junction to ambient at 0.375” lead length, vertical P.C. board mounted (2) Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A Package Outline Package Case Outline D C A B DO-201AD DO-201AD DIM Millimeters Inches Min Max Min Max A 1.19 1.30 0.046 0.052 B 7.20 9.60 0.285 0.375 C 25.40 --- 1.000 --- D 4.80 5.30 0.190 0.210 Apr. 2008 Release / Orig Page 2