TE200 THRU TE2010 GLASS PASSIVATED JUNCTION PLASTIC RECTIFIER VOLTAGE - 50 to 1000 Volts CURRENT - 2.0 Amperes DO-15 FEATURES l Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound l 2.0 ampere operation at TA=55 with no thermal runaway l Exceeds environmental standards of MIL-S-19500/228 l Glass passivated junction in DO-15 package MECHANICAL DATA Case: Molded plastic , DO-15 Terminals: Axial leads, solderable per MIL-STD-202, Method 208 Polarity: Color band denotes cathode Mounting Position: Any Weight: 0.015 ounce, 0.4 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current .375"(9.5mm) Lead Length at TA=55 Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) Maximum Forward Voltage at 2.0A Maximum Reverse Current Ta=25 at Rated DC Blocking Voltage Ta=100 Typical Junction capacitance (Note 1) Typical Thermal Resistance (Note 2) R JA Operating and Storage Temperature Range TA TE200 TE201 TE202 TE204 TE206 TE208 50 35 50 100 70 100 200 140 200 400 280 400 2.0 600 420 600 800 560 800 TE2010 UNITS 1000 700 1000 V V V A 70 A 1.1 5.0 50 25 25 -55 TO +150 V A A PF /W NOTES: 1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC. 2. Thermal Resistance from Junction to Ambient and from junction to lead at 0.375"(9.5mm) lead length P.C.B mounted. RATING AND CHARACTERISTIC CURVES TE200 THRU TE2010 Fig. 1-TYPICAL FORWARD CHARACTERISTICS Fig. 3-FORWARD CURRENT DERATING CURVE Fig. 2-PEAK FORWARD SURGE CURRENT Fig. 4-TYPICAL JUNCTION CAPACITANCE