PG150 THRU PG1510 GLASS PASSIVATED JUNCTION PLASTIC RECTIFIER VOLTAGE - 50 to 1000 Volts CURRENT - 1.5 Amperes DO-15 FEATURES l Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing l Flame Retardant Epoxy Molding Compound 1.5 ampere operation at TA=55 ¢J with no thermal runaway l l Exceeds environmental standards of MIL-S-19500/228 Glass passivated junction MECHANICAL DATA Case: Molded plastic , DO-15 Terminals: Axial leads, solderable per MIL-STD-202, Method 208 Polarity: Color band denotes cathode Mounting Position: Any Weight: 0.015 ounce, 0.4 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ¢J ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current .375"(9.5mm) Lead Length at TA=55 ¢J Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) Maximum Forward Voltage at 1.5A Maximum Reverse Current Ta=25 ¢J at Rated DC Blocking Voltage Ta=100 ¢J Typical Junction capacitance (Note 1) Typical Thermal Resistance (Note 2) R £KJA Operating and Storage Temperature Range TA PG150 PG151 PG152 PG154 PG156 50 35 50 100 70 100 200 140 200 400 280 400 1.5 600 420 600 PG158 PG1510 UNITS 800 560 800 1000 700 1000 V V V A 50 A 1.1 5.0 50 V £g A £g A PF ¢J /W ¢J 25 45.0 -55 TO +150 NOTES: 1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC. 2. Thermal Resistance from Junction to Ambient and from junction to lead at 0.375"(9.5mm) lead length P.C.B mounted. RATING AND CHARACTERISTIC CURVES 10 1.0 T J = 25 ¢J 0.1 .01 0 .2 .4 .6 .8 1.0 1.2 INSTANTANEOUS FORWARD VOLTAGE, VOLTS PEAK FORWARD SURGE CURRENT, AMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES PG150 THRU PG1510 50 40 30 20 10 0 1 2 4 6 8 10 20 40 60 80 100 NUMBER OF CYCLES AT 60Hz Fig. 2-PEAK FORWARD SURGE CURRENT 100 1.50 1.25 CAPACITANCE - pF AVERAGE FORWARD RECTIFIED CURRENT, AMPERES Fig. 1-TYPICAL FORWARD CHARACTERISTICS 1.00 .75 SINGLE PHASE HALF WAVE 60Hz .50 RESISTIVE OR .25 0 TJ = 25 ¢J 10 INDUCTIVE LOAD .375" 9.5mm LEAD LENGTHS 25 50 75 100 125 150 175 AMBIENT TEMPERATURE, ¢J Fig. 3-FORWARD CURRENT DERATING CURVE 1 1 4 10 100 REVERSE VOLTAGE, VOLTS Fig. 4-TYPICAL JUNCTION CAPACITANCE