SN74LVC1G98-EP CONFIGURABLE MULTIPLE-FUNCTION GATE www.ti.com SCES462C – JUNE 2003 – REVISED OCTOBER 2006 FEATURES • • • • • • • • • • (1) Controlled Baseline – One Assembly/Test Site, One Fabrication Site Enhanced Diminishing Manufacturing Sources (DMS) Support Enhanced Product-Change Notification Qualification Pedigree (1) Supports 5-V VCC Operation Inputs Accept Voltages to 5.5 V Max tpd of 6.3 ns at 3.3 V Low Power Consumption, 10-µA Max ICC ±24-mA Output Drive at 3.3 V Ioff Supports Partial-Power-Down Mode Operation • • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II ESD Protection Exceeds JESD 22 – 2000-V Human-Body Model (A114-A) – 200-V Machine Model (A115-A) – 1000-V Charged-Device Model (C101) DCK PACKAGE (TOP VIEW) ln1 1 6 ln2 GND 2 5 VCC ln0 3 4 Y See mechanical drawings for dimensions. Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits. DESCRIPTION/ORDERING INFORMATION This configurable multiple-function gate is designed for 1.65-V to 5.5-V VCC operation. The SN74LVC1G98 features configurable multiple functions. The output state is determined by eight patterns of 3-bit input. The user can choose the logic functions MUX, AND, OR, NAND, NOR, inverter, and noninverter. All inputs can be connected to VCC or GND. This device functions as an independent gate, but because of Schmitt action, it may have different input threshold levels for positive-going (VT+) and negative-going (VT–) signals. This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. ORDERING INFORMATION TA –40°C to 85°C (1) PACKAGE (1) SOT (SC-70) – DCK Reel of 3000 ORDERABLE PART NUMBER SN74LVC1G98IDCKREP V62/013641-01XE TOP-SIDE MARKING CWR Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2003–2006, Texas Instruments Incorporated SN74LVC1G98-EP CONFIGURABLE MULTIPLE-FUNCTION GATE www.ti.com SCES462C – JUNE 2003 – REVISED OCTOBER 2006 FUNCTION TABLE INPUTS In2 In1 In0 OUTPUT Y L L L H L L H H L H L L L H H L H L L H H L H L H H L H H H H L LOGIC DIAGRAM (POSITIVE LOGIC) ln0 3 4 ln1 ln2 1 6 FUNCTION SELECTION TABLE LOGIC FUNCTION 2 FIGURE NO. 2-to-1 data selector with inverted output 1 2-input NAND gate 2 2-input NOR gate with one inverted input 3 2-input AND gate with one inverted input 3 2-input NAND gate with one inverted input 4 2-input OR gate with one inverted input 4 2-input NOR gate 5 Noninverted buffer 6 Inverter 7 Submit Documentation Feedback Y SN74LVC1G98-EP CONFIGURABLE MULTIPLE-FUNCTION GATE www.ti.com SCES462C – JUNE 2003 – REVISED OCTOBER 2006 Figure 1. 2-to-1 Data Selector With Inverted Output Figure 2. 2-Input NAND Gate Figure 3. 2-Input NOR Gate With One Inverted Input 2-Input AND Gate With One Inverted Input Figure 4. 2-Input NAND Gate With One Inverted Input 2-Input OR Gate With One Inverted Input Figure 5. 2-Input NOR Gate Figure 6. Noninverted Buffer Figure 7. Inverter Submit Documentation Feedback 3 SN74LVC1G98-EP CONFIGURABLE MULTIPLE-FUNCTION GATE www.ti.com SCES462C – JUNE 2003 – REVISED OCTOBER 2006 Absolute Maximum Ratings (1) over operating free-air temperature range (unless otherwise noted) MIN MAX VCC Supply voltage range –0.5 6.5 V VI Input voltage range (2) –0.5 6.5 V –0.5 6.5 V –0.5 VCC + 0.5 state (2) UNIT VO Voltage range applied to any output in the high-impedance or power-off VO Voltage range applied to any output in the high or low state (2) (3) IIK Input clamp current VI < 0 –50 mA IOK Output clamp current VO < 0 –50 mA IO Continuous output current ±50 mA ±100 mA 259 °C/W 150 °C Continuous current through VCC or GND θJA Package thermal Tstg Storage temperature range (1) (2) (3) (4) impedance (4) –65 V Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. The input and output negative-voltage ratings may be exceeded if the input and output current ratings are observed. The value of VCC is provided in the recommended operating conditions table. The package thermal impedance is calculated in accordance with JESD 51-7. Recommended Operating Conditions (1) MIN Operating 1.65 UNIT 5.5 VCC Supply voltage VI Input voltage 0 5.5 V VO Output voltage 0 VCC V Data retention only –4 VCC = 2.3 V IOH High-level output current –8 –16 VCC = 3 V –32 VCC = 1.65 V 4 VCC = 2.3 V Low-level output current 8 16 VCC = 3 V (1) Operating free-air temperature mA 24 VCC = 4.5 V TA mA –24 VCC = 4.5 V IOL V 1.5 VCC = 1.65 V 4 MAX 32 –40 85 All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. Submit Documentation Feedback °C SN74LVC1G98-EP CONFIGURABLE MULTIPLE-FUNCTION GATE www.ti.com SCES462C – JUNE 2003 – REVISED OCTOBER 2006 Electrical Characteristics (1) over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS MIN 1.65 V 0.79 1.16 2.3 V 1.11 1.56 VT+ Positive-going input threshold voltage 3V 1.5 1.87 2.16 2.74 5.5 V 2.61 3.33 1.65 V 0.35 0.62 2.3 V 0.58 0.87 3V 0.84 1.19 4.5 V 1.41 1.9 5.5 V 1.87 2.29 1.65 V 0.3 0.62 2.3 V 0.4 0.8 ∆VT Hysteresis (VT+– VT–) VOH (1) 1.04 5.5 V 0.71 1.11 1.2 2.3 V 1.9 IOH = –16 mA 3V IOL = 100 µA 1.65 V to 5.5 V 0.1 IOL = 4 mA 1.65 V 0.45 IOL = 8 mA 2.3 V 0.3 0.4 VI = 5.5 V or GND, IO = 0 One input at VCC – 0.6 V, Other inputs at VCC or GND V 0.55 4.5 V VI or VO = 5.5 V V 3.8 3V Ioff V 2.3 4.5 V VI = 5.5 V or GND V V 2.4 IOH = –32 mA IOL = 16 mA UNIT VCC – 0.1 IOH = –8 mA ICC Ci 0.87 0.71 1.65 V I OL= 32 mA ∆ICC 0.53 1.65 V to 5.5 V I OL= 24 mA II 3V 4.5 V IOH = –4 mA IOH = –24 mA VOL MAX 4.5 V VT– Negative-going input threshold voltage IOH = –100 µA TYP (1) VCC 0.55 0 V to 5.5 V ±5 µA 0V ±10 µA 1.65 V to 5.5 V 10 µA 3 V to 5.5 V 500 µA VI = VCC or GND 3.3 V 3.5 pF All typical values are at VCC = 3.3 V, TA = 25°C. Submit Documentation Feedback 5 SN74LVC1G98-EP CONFIGURABLE MULTIPLE-FUNCTION GATE www.ti.com SCES462C – JUNE 2003 – REVISED OCTOBER 2006 Switching Characteristics over recommended operating free-air temperature range (unless otherwise noted) (see Figure 8) PARAMETER tpd FROM (INPUT) TO (OUTPUT) Any In Y VCC = 1.8 V ± 0.15 V VCC = 2.5 V ± 0.2 V VCC = 3.3 V ± 0.3 V VCC = 5 V ± 0.5 V MIN MAX MIN MAX MIN MAX MIN MAX 3.2 14.4 2 8.3 1.5 6.3 1.1 5.1 UNIT ns Operating Characteristics TA = 25°C PARAMETER Cpd 6 Power dissipation capacitance TEST CONDITIONS VCC = 1.8 V VCC = 2.5 V VCC = 3.3 V VCC = 5 V TYP TYP TYP TYP f = 10 MHz 23 23 23 26 Submit Documentation Feedback UNIT pF SN74LVC1G98-EP CONFIGURABLE MULTIPLE-FUNCTION GATE www.ti.com SCES462C – JUNE 2003 – REVISED OCTOBER 2006 PARAMETER MEASUREMENT INFORMATION VLOAD S1 RL From Output Under Test Open TEST GND CL (see Note A) S1 Open VLOAD tPLH/tPHL tPLZ/tPZL tPHZ/tPZH RL GND LOAD CIRCUIT INPUTS VCC 1.8 V ± 0.15 V 2.5 V ± 0.2 V 3.3 V ± 0.3 V 5 V ± 0.5 V VI tr/tf VCC VCC 3V VCC £2 ns £2 ns £2.5 ns £2.5 ns VM VLOAD CL RL VD VCC/2 VCC/2 1.5 V VCC/2 2 × VCC 2 × VCC 6V 2 × VCC 30 pF 30 pF 50 pF 50 pF 1 kW 500 W 500 W 500 W 0.15 V 0.15 V 0.3 V 0.3 V VI Timing Input VM 0V tW tsu VI Input VM VM th VI Data Input VM VM 0V 0V VOLTAGE WAVEFORMS PULSE DURATION VOLTAGE WAVEFORMS SETUP AND HOLD TIMES VI VM Input VM 0V tPLH VOH Output VM VOL tPHL VM VM 0V Output Waveform 1 S1 at VLOAD (see Note B) tPLH tPLZ VLOAD/2 VM tPZH VOH Output VM tPZL tPHL VM VI Output Control VM VOL VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES INVERTING AND NONINVERTING OUTPUTS Output Waveform 2 S1 at GND (see Note B) VOL + VD VOL tPHZ VM VOH – VD VOH »0 V VOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES LOW- AND HIGH-LEVEL ENABLING NOTES: A. CL includes probe and jig capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control. C. All input pulses are supplied by generators having the following characteristics: PRR £ 10 MHz, ZO = 50 W. D. The outputs are measured one at a time, with one transition per measurement. E. tPLZ and tPHZ are the same as tdis. F. tPZL and tPZH are the same as ten. G. tPLH and tPHL are the same as tpd. H. All parameters and waveforms are not applicable to all devices. Figure 8. Load Circuit and Voltage Waveforms Submit Documentation Feedback 7 PACKAGE OPTION ADDENDUM www.ti.com 18-Sep-2008 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty SN74LVC1G98IDCKREP ACTIVE SC70 DCK 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM V62/03641-01XE ACTIVE SC70 DCK 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Lead/Ball Finish MSL Peak Temp (3) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF SN74LVC1G98-EP : SN74LVC1G98 • Catalog: • Automotive: SN74LVC1G98-Q1 NOTE: Qualified Version Definitions: - TI's standard catalog product • Catalog • Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects Addendum-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 23-Jun-2011 TAPE AND REEL INFORMATION *All dimensions are nominal Device SN74LVC1G98IDCKREP Package Package Pins Type Drawing SC70 DCK 6 SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) 3000 180.0 8.4 Pack Materials-Page 1 2.25 B0 (mm) K0 (mm) P1 (mm) 2.4 1.22 4.0 W Pin1 (mm) Quadrant 8.0 Q3 PACKAGE MATERIALS INFORMATION www.ti.com 23-Jun-2011 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN74LVC1G98IDCKREP SC70 DCK 6 3000 202.0 201.0 28.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Audio www.ti.com/audio Communications and Telecom www.ti.com/communications Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps DLP® Products www.dlp.com Energy and Lighting www.ti.com/energy DSP dsp.ti.com Industrial www.ti.com/industrial Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical Interface interface.ti.com Security www.ti.com/security Logic logic.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Power Mgmt power.ti.com Transportation and Automotive www.ti.com/automotive Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com Wireless www.ti.com/wireless-apps RF/IF and ZigBee® Solutions www.ti.com/lprf TI E2E Community Home Page e2e.ti.com Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2011, Texas Instruments Incorporated