Clipped Sine SM TCXO Temperature Compensated Crystal Oscillator • • • • • Excellent frequency stability Ultra miniature size SMD, reflow soldering available Clipped sine output, tight specifications and an internal trimmer Suited for communications equipment, cellular radios, and instrumentation. Complies with Directive 2002/95/EC (RoHS Compliant) TO521 Specifications: Frequency Range: Operating Temperature: Storage Temperature: TO-V 10.000 MHz ~ 26.0000 MHz 0°C ~ +50°C -A -10°C ~ +60°C -B -20°C ~ +70°C -C -30°C ~ +75°C -D 0°C ~ +85°C -E -40°C ~ +85°C -L -40°C ~ +85°C Frequency Stability: Vs. Temperature: Vs. Input Voltage: Vs. Load: Aging: ± 1.0 ppm ~ ± 5.0 ppm ± 0.2 ppm at voltage ± 5% ± 0.2 ppm at load ± 10% ± 1.0 ppm max first year Supply Current: 10 MHz ~ 15 MHz 15 MHz ~ 26 MHz 1.5 mA max 2.0 mA max Pulling Range: TCXO -T VC-TCXO -V Land Pattern Vss+0.5V ~ Vcc –0.5V: 5 ~ 25 ppm/V (optional) Control Slope: Start-Up Time: Positive 2 msec (typical) Output Waveform: Clipped Sine, 10KΩ//10pF Output Voltage: 0.8 Vp-p min. SSB Phase Noise: (Typical at 12.8 MHz) - 90 dBc/Hz (offset 10Hz) -115 dBc/Hz (offset 100Hz) -135 dBc/Hz (offset 1KHz) -148 dBc/Hz (offset 10KHz) Supply Voltage: +3.3 VDC (± 0.2%) Pin Configurations #1 VC or NC #2 Ground #3 Output #4 Supply VDD All dimensions are in mm +5.0 VDC (± 0.3%) -P Ordering Information Note: 1. Other frequencies, stabilities, and operating temperature ranges available. Consult VTC Support for specific requirements. 2. Not all combinations of the above, stabilities, and temperature ranges are available. Consult VTC Support if your requirement is not standard. 3. All specifications subject to change without notice. Phone: +86 (10) 5820-3910 © 2006 by Vanlong Technology Co., Ltd. Fax: +86 (10) 5820-3915 Product name + Operating Temperature + Stability + Pulling Range + Frequency (MHz) i.e. TO521B2.5T-10.0MHz ±2.5ppm/-10°C~+60°C/3.3V Or TO521D2.5TP-10.0MHz ±2.5ppm/-30°C~+75°C/5.0V Email: [email protected] Web: http://www.vanlong.com TO521