480.00 MHz SAW Filter Ideal for DBS Receivers, IF Filter Constant Group Delay Improved ESD capability by integrated shunt resistors Rugged, Hermetic, Low Profile TO-39 Package SF480-9 Absolute Maximum Rating (Ta=25°C) Parameter Rating Unit 5 V AC Voltage Between Any Two Pins VPP DC Voltage Between Any Two Pins VDC 0 V Operating Temperature Range TA -25 ~ +85 °C Storage Temperature Range Tstg -40 ~ +85 °C Electronic Characteristics of Channel 1 Parameter Center Frequency (25°C) Between 3dB point Tolerance from 480.00 MHz Insertion Attenuation 3dB Bandwidth Sym Minimum Typical Maximum Unit fC NS 480.00 NS MHz ∆fC - - 1.0 MHz α - 22.0 24.5 dB BW3 - 27.0 - MHz - 3.2 5.0 dB - 3.5 5.0 dB Relative Attenuation 466.00 MHz 493.00 MHz αrel Lower Sidelobe 430.00 … 455.00 MHz 34.0 39.0 - dB Upper Sidelobe 504.00 … 530.00 MHz 34.0 39.0 - dB - 40.0 45.0 - dB ∆α - 0.6 1.2 dB ∆τ - 10.0 18.0 ns FTC - -86 - ppm/K Reflected Wave Signal Suppression 0.135µs … 2.0µs after main pulse Amplitude Ripple (p-p) 471.00 … 488.00 MHz Group Delay Ripple (p-p) 466.00 … 493.00 MHz Temperature Coefficient of Frequency Electronic Characteristics of Channel 2 Parameter Center Frequency (25°C) Between 3dB point Tolerance from 480.00 MHz Insertion Attenuation 3dB Bandwidth Sym Minimum Typical Maximum Unit fC NS 480.00 NS MHz ∆fC - - 1.0 MHz α - 25.0 26.5 dB BW3 - 36.0 - MHz - 3.5 4.8 dB - 2.3 4.8 dB Relative Attenuation 461.50 MHz 497.50 MHz αrel Lower Sidelobe 430.00 … 449.00 MHz 34.0 39.0 - dB Upper Sidelobe 510.00 … 530.00 MHz 33.0 36.0 - dB - 40.0 45.0 - dB ∆α - 0.6 1.2 dB ∆τ - 12.0 18.0 ns FTC - -86 - ppm/K Reflected Wave Signal Suppression 0.13µs … 2.0µs after main pulse Amplitude Ripple (p-p) 468.50 … 490.50 MHz Group Delay Ripple (p-p) 461.50 … 597.50 MHz Temperature Coefficient of Frequency NS = Not Specified Phone: +86 10 6301 4184 © 2003 by Vanlong Technology Co., Ltd. Fax: +86 10 6301 9167 Email: [email protected] Web: http://www.vanlong.com SF480-9 480.00 MHz SAW Filter Notes: 1. The frequency fC is defined as the midpoint between the 3dB frequencies. 2. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is connected to a 50Ω test system with VSWR ≤ 1.2:1. The test fixture L and C are adjusted for minimum insertion loss at the filter center frequency, fC. Note that insertion loss, bandwidth, and passband shape are dependent on the impedance matching component values and quality. 3. Unless noted otherwise, specifications apply over the entire specified operating temperature range. 4. The specifications of this device are based on the test circuit shown above and subject to change or obsolescence without notice. 5. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale. 6. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. 7. For questions on technology, prices and delivery please contact our sales offices or e-mail [email protected]. Package Dimensions (TO-39-4) Electrical Connections Terminals 1 2 3 4 Connection Input / Output Output 2 / Input 2 Output 1 / Input 1 Case Ground Package Dimensions Dimensions A B C D E F G H Marking SF480-9 480.00 Nom. (mm) 9.35 3.40 3.00 0.45 5.08 2.54 Tol. (mm) ±0.10 ±0.10 ±0.20 ±0.10 ±0.10 ±0.20 1.0 0.6 Equivalent LC Model Ink Marking Color: Black or Blue Typical Frequency Response Channel 1 Phone: +86 10 6301 4184 © 2003 by Vanlong Technology Co., Ltd. Channel 2 Fax: +86 10 6301 9167 Email: [email protected] Web: http://www.vanlong.com SF480-9