V630ME03-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Fixed Wireless • Point-to-point • £(f) (dBc/Hz) 9939 Via Pasar | San Diego, CA 92126 TEL: (858) 621-2700 | FAX: (858) 621-2722 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 2370 Typ Max Units 2515 MHz Phase Noise @ 10 kHz offset (1 Hz BW) -96 dBc/Hz Harmonic Suppression (2nd) -14 dBc Tuning Voltage 0.5 4.5 MHz/V 65 Tuning Sensitivity (avg.) 7 dBm Input Capacitance 50 pF Pushing 11 MHz/V Pulling (14 dB Return Loss, Any Phase) 13 MHz 85 °C Max Units Power Output 2 Load Impedance Operating Temperature Range 50 -30 Package Style Power Supply Requirements Supply Voltage (Vcc, nom.) Supply Current (Icc) 4.5 Vdc MINI-14H Min Typ 4.5 9 Vdc 14 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B V630ME03-LF Voltage-Controlled Oscillator Surface Mount Module Rev A1 Tuning Curve, typ. FREQUENCY (MHz) 2610 2590 2570 2550 2530 2510 2490 2470 2450 2430 2410 2390 2370 2350 2330 2310 2290 85 °C 25 °C -30 °C 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 10 9 8 7 6 5 0.030 MIN. CUTBACK FROM LIVE PADS 4 3 2 1 0 2314 2345 2373 2403 2432 2465 2500 2533 2567 2599 FREQUENCY (MHz) 85 °C 25 °C -30 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-14H 0.220 MINI-14H-LOW 0.160 MINI-14H-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B