DISPLAYTRONIC DISPLAYTRONIC CO., LTD. SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY AQM1264D-MLG-YBS GRAPHIC MODULE VER1.0 CUSTOMER APPROVAL 1.POLARIZER OPTIONS: □R=REFLECTIVE □F=TRANSFLECTIVE □N=TRANSMISSIVE NEGATIVE ■M=TRANSMISSIVE POSITIVE 2.BACKLIGHT OPTIONS:□N=NONE □E=EL ■L=LED □C=CCFL 3. BACKLIGHT COLOR: □A= AMBER □B= BLUE ■G= GREEN □W=WHITE □R= RED □RGB= RED+GREEN+BLUE 4.FLUID OPTIONS: □T=TN □F=FSTN ■Y=STN-YELLOW GREEN □G=STN-GRAY □B=STN-BLUE 5. VIEWING DIRECTION: ■B=BOTTOM VIEW(6 O’CLOCK) □T=TOP VIEW(12 O’CLOCK) 6.TEMPERATURE RANGE: ■ S=STANDARD TEMPERATURE RANGE □H=DUAL POWER,WIDE TEMPERATURE RANGE □W=SINGLE POWER,WIDE TEMPERATURE RANGE2 7.OTHERS REQUIREMENT: ※ CUSTOMER PART NO. : APPROVAL AQM1264D-MLG-YBS COMPANY CHOP CUSTOMER COMMENTS DISPLAYTRONIC ENGINEERING APPROVAL DESIGN BY CHECKED BY APPROVED BY AQM1264D-MLG-YBS GRAPHIC MODULE VER1.0 REVISION RECORD REVISION VER1.0 REVISION DATE CONTENTS 21/11-2007 FIRST ISSUED DISPLAYTRONIC CO., LTD. 1 AQM1264D-MLG-YBS GRAPHIC MODULE VER1.0 ※ CONTENTS 1.0 MECHANICAL DRAWING 2.0 MECHANICAL SPECIFICATION 3.0 ABSOLUTE MAXIMUM RATINGS 4.0 ELECTRICAL CHARACTERISTICS 5.0 LCD OPTICAL CHARACTERISTICS 6.0 BLOCK DIAGRAM 7.0 PIN ASSIGNMENT 8.0 TIMING CHARACTERISTICS 9.0 COMMAND SETTING DESCRIPTION 10.0 RELIABILITY SPECIFICATION DISPLAYTRONIC CO., LTD. 2 DISPLAYTRONIC CO., LTD. LCD规格详述 单位 批准： 审核： 制图: 比例: 毫米(mm) 2007/09/20 更改FPC(D7) 3 ANG = - 误差 X.X = ±0.2 X.XX = ±0.10 2007/09/19 更改背光颜色A3 2 版本 页码 型号： 品号： 题目： XIAMEN Z ETTL ER EL ECTRONICS CO., L TD. 1/1 厦门赛特勒电子有限公司 LED+ 9 LED8 GND 7 VDD(3.0V) 6 RST 5 RS 4 CS 3 SCK 2 SDA 1 符号 引脚 日期 2007/09/10 修改内容 第一次发行 变更号 1 次数 1.0 AQM1264D-MLG-YBS GRAPHIC MODULE VER1.0 MECHANICAL DRAWING 3 AQM1264D-MLG-YBS GRAPHIC MODULE VER1.0 NOTE1: ULESS OTHERWISE SPECIFIED STANDARD TOLERANCE ±0.2MM 2.0 MECHANICAL SPECIFICATION 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Number of dots Module dimension Bezel dimension Active display area (A/A) View area (V/A) Dot Size Dot Pitch Driver method Display mode LCD type Driver IC Backlight Options 128x64 93.0mm(L) x 57.0mm(W) x 10.5mm(T) 70.6mm(L) x 51.5mm(W) x 10.5mm(T) 60.775mm(L)x32.935mm(W) 65.5mm(L)x38.0mm(W) 0.45mm(W) x 0.49mm(H) 0.475mm(W) x 0.515mm(H) 1/65 duty,1/9 bias, Vop=9.8V Positive STN Transmissive Yellow-Green STN/ YELLOW-GREEN ST7565P COG LED-SIDE Green 3.0 ABSOLUTE MAXIMUM RATINGS Item Min Typ Max Unit DC Supply Voltage(VDD) 0.3 5.0 V DC Supply Voltage(Vout) 0.3 18.0 V DC Supply Voltage(V0) 0.3 18.0 V Input Voltage 0.3 VDD+0.3 V Operating Temperature -10 60 ºC Storage Temperature -20 70 ºC 4.0 ELECTRICAL CHARACTERISTICS Item Symbol Condition Min Typ Max Unit Power Supply VDD-VSS - 1.8 3.0 3.3 V Input voltage (high) Vih H level 0.8 VDD - VDD V Input voltage (low) Vil L level Vss - 0.2 VDD V Output voltage (high) Voh IOH=-0.5mA 0.8 VDD VDD V Output voltage (low) Vol IOL=0.5mA Vss 0.2 VDD V Power Supply Current Idd Vdd=3.0V - - 0.8mA mA LED Power Supply Voltage A-K - 3.0 3.15 3.3 V LED Power Supply Current IBL - - 15 - mA Luminance evenness - Same part(Min/Max) 70% - - - DISPLAYTRONIC CO., LTD. 4 AQM1264D-MLG-YBS GRAPHIC MODULE VER1.0 5.0 BLOCK DIAGRAM DISPLAYTRONIC CO., LTD. 5 AQM1264D-MLG-YBS GRAPHIC MODULE VER1.0 6.0 PIN ASSIGNMENT Pin No I/O Name Description 1 I SDA Serial data input 2 I SCK Serial clock input 3 I /CS Chip select signal. Active:L 4 I RS Display data or control data select signal 5 I RST Reset signal 6 I VDD Power supply(3.0V) 7 I GND Power supply(0V) 8 I LED-(K) Power supply for backlight(+) 9 I LED+(A) Power supply for backlight(-) 7.0 LCD OPTICAL CHARACTERISTICS Item Symbol Test condition Ф1-Ф2 Viewing angle Ф1 T=25℃,CR=2 Ф2 θ Contrast ratio Rise time Fall time Min. Typ. Max. - 65 - 35 45 - -25 -20 - - ±35 - Unit Note Degree Note2 K1 Ф=0°,θ=0° 6 - - - Note3 tr1 Ф=0°,θ=0° Transflective mode - 150 250 ms Note4 - 150 250 ms Note4 td1 Note 2: Definition of angle θ and φ. φ: Angle measured from normal to direction of observation. θ: Azimuth angle measured counter-clockwise from X-axis. Note 3 : Definition of Contrast ratio The contrast ratio is defined to be the ratio of transmission or reflection of a symbol at its "on" and "off" state. Contrast ratio(K) = Transmission/Reflectance at "OFF" state Transmission/Reflectance at "ON" state Note 4 : Definition of response time At specific operating voltage and temperature, the times measured by observing contrast or transmission ratio. DISPLAYTRONIC CO., LTD. 6 AQM1264D-MLG-YBS GRAPHIC MODULE VER1.0 CONTRAST(%) (DARK) 100% 90% (BRIGHT) 10% 0% t0 td tr Von TIME Voff Delay time to : Measured between zero and 10% with Von. Rise time tr : Measured between 10% and 90% of LCD segment maximum response with Von Decay time td : With voltage switches to zero and the instant LCD segment reaches 10% of its maximum response Ton : Time measured between the instant operating voltage is applied to display and the distant the display reaches 90% of its maximum response. Toff : Time measured between the instant operating voltage switches to zero and the instant the display reaches 10% of its maximum response. LIQUID CRYSTAL PANEL LIFE TIME 50000 hours minimum at 25℃±10℃ and 65% RH maximum. Note: Definition of life time : the time up to occurrence of any of the following: Contrast reduces to 30% of the initial value. Current consumption becomes three times the initial value. Orientation deteriorates significantly. DISPLAYTRONIC CO., LTD. 7 AQM1264D-MLG-YBS GRAPHIC MODULE VER1.0 8.0 TIMING CHARACTERISTICS DISPLAYTRONIC CO., LTD. 8 AQM1264D-MLG-YBS GRAPHIC MODULE VER1.0 9.0 COMMAND SETTING DESCRIPTION DISPLAYTRONIC CO., LTD. 9 AQM1264D-MLG-YBS GRAPHIC MODULE VER1.0 10.0 RELIABILITY SPECIFICATION ITEM High temperature operation Low temperature operation High humidity, High temperature operation High temperature storage Low temperature storage Temperature cycling(storage) CONDCONDITIONS 60℃ for 96 hours -10℃ for 96 hours 40℃,90%RH for 96 hours 70℃ for 96 hours -20℃ for 96 hours 70℃ (30 min) ↓↑ 25℃ ( 5 min) ↓↑ -20℃ ( 30 min) CYCLES: 5 ESD (Electrostatic Discharge) DISPLAYTRONIC CO., LTD. +/-8KV air discharge to LCD module. +/-2KV discharge is applied to VDD&VSS of LCD module. Test for functionality and No missing line after discharge. 10