AZ6991 SENSITIVE SUBMINIATURE RELAY FEATURES • • • • • • • • • • Extremely small (5mm) 6 Amp switching capability High sensitivity, 95 mW pickup Dielectric strength 4000 Vrms contact to coil Isolation spacing greater than 8 mm Reinforced insulation, EN 60730-1 (VDE 0631, part 1) EN 60335-1 (VDE 0700, part 1) Coils up to 60 VDC Epoxy sealed version available UL, CUR file E43203 VDE file 40020561 CONTACTS GENERAL DATA Arrangement SPST (1 Form A) SPDT (1 Form C) Ratings Resistive load: Max. switched power: 180 W or 1500 VA Max. switched current: 6 A Max. switched voltage: 150 VDC* or 400 VAC Life Expectancy Mechanical Electrical Minimum operations 1 X 107 operations 1 X 105 at 5 A, 250 VAC Operate Time (typical) 5 ms at nominal coil voltage Release Time (typical) 3 ms at nominal coil voltage (with no coil suppression) * Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Rated Load UL, CUR VDE 6 A at 277 VAC resistive 6 A at 30 VDC resistive R300 Pilot Duty 6 A at 6 A at 250 VAC resistive 30 VDC resistive Dielectric Strength 1000 Vrms between open contacts (at sea level for 1 min.) 4000 Vrms contact to coil 6000 V surge, contact to coil Insulation Resistance 100 megohms min. at 20°C, 500 VDC, 50% RH Dropout Greater than 5% of nominal coil voltage At nominal coil voltage -40°C (-40°F) to 85°C (158°F) -40°C (-40°F) to 105°C (221°F) Material Silver nickel, gold plating available Ambient Temperature Operating Storage Resistance < 50 milliohms initially Vibration COIL Power 1 mm DA at 10–500 Hz Shock 5g Enclosure P.B.T. polyester 94V-0 Terminals Tinned copper alloy, P.C. Max. Solder Temp. 260°C (500°F) Max. Solder Time 5 seconds At Pickup Voltage (typical) 95 mW Max. Continuous Dissipation 0.9 W at 20°C (68°F) ambient Temperature Rise 20°C (36°F) at nominal coil voltage Max. Solvent Temp. 80°C (176°F) Max. 105°C (221°F) Max. Immersion Time 30 seconds Weight 6 grams Packing unit in pcs 20 per plastic tube / 1000 per carton box Temperature NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 4. Specifications subject to change without notice. ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2007-04-19 AZ6991 RELAY ORDERING DATA COIL SPECIFICATIONS Nominal Coil VDC 5 ORDER NUMBER* Must Operate VDC 3.75 Max. Continuous VDC 11.2 Coil Resistance Ôhm ± 10% 147 AZ6991–1A–5D AZ6991–1C–5D 12 9.0 26.8 848 AZ6991–1A–12D AZ6991–1C–12D 24 18.0 53.7 3,390 (±15%) AZ6991–1A–24D AZ6991–1C–24D 48 36.0 100.0 10,600 (±15%) AZ6991–1A–48D AZ6991–1C–48D 16,600 (±15%) AZ6991–1A–60D AZ6991–1C–60D 60 45.0 120.0 * Add suffix “E” at the end of order number for sealed version. Add suffix “A” at the end of order number for gold plated contacts. Add suffix “H” at the end of order number for horizontal mounting. 1 Form A 1 Form C MECHANICAL DATA PC BOARD LAYOUT 1.102 [28.0] .197 [5.0] .466 [11.34] .148 [3.75] .591 [15.0] .197 [5.0] .075 [1.9] 2 x ø .039 [ø 1.0] 5 x .138 [3.5] 2 x .02 [0.5] 5 x .02 [0.5] 3 x .039 [1.0] .047 [1.2] Horizontal Mount Note: Mounting hole diameters and center to center dimensions are the same for both vertical and horizontal mounting version Vertical Mount 1.102 [28.0] .050 [1.26] .610 [15.5] .591 [15.0] WIRING DIAGRAM .197 [5.0] Form A 1 2 2x .02 [0.5] .602 [15.3] 3 x ø .051 [ø 1.3] Vertical Mount 5 x .118 [3.0] .075 [1.9] .197 [5.0] .020 [0.5] 3 x .039 [1.0] 1 2 4 Form A 4 5 5 5 x .02 [0.5] Form C Form C 1 2 1 2 3 4 3 4 5 5 Horizontal Mount Vertical Mount Horizontal Mount Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2007-04-19