! AZ821/AZ831 on tin ue d SUBMINIATURE DIP RELAY FEATURES • • • • • • • • • • • Low profile for compact board spacing DC coils to 48 VDC Single button crossbar contacts High sensitivity, 100 mW pickup Life expectancy to 15 million operations High switching capacity, 60 W, 125 VA Fits standard 16 pin IC socket Epoxy sealed Meets FCC Part 68.302 1500 V lightning surge Meets FCC Part 68.304 1000 V dielectric UL, CUR file E43203 CONTACTS GENERAL DATA Arrangement DPDT (2 Form C) Ratings Resistive load: Max. switched power: 60 W or 125 VA Max. switched current: 3 A Max. switched voltage: 220 VDC or 250 VAC Rated Load UL, CUR Material Resistance COIL 1.0 A 0.5 A 0.3 A 1.0 A at 125 at 125 at 100 at 30 VAC, AZ821 VAC, AZ831 VDC VDC Life Expectancy Mechanical Electrical Minimum operations 15 x 106 1 x 105 at 2 A 30 VDC Res. Operate Time (typical) 5 ms at nominal coil voltage Release Time (typical) 4 ms at nominal coil voltage (with no coil suppression) Dielectric Strength 1000 Vrms coil to contact (at sea level for 1 min.) 750 Vrms contact to contact Insulation Resistance 1000 megohms min. at 20°C, 500 VDC, 50% RH Dropout Greater than 5% of nominal coil voltage Capacitance Contact to contact: 2.0 pF Contact set to contact set: 1.5 pF Contact to coil: 5.0 pF Ambient Temperature Operating At nominal coil voltage AZ821: -40°C (-40°F) to 60°C (140°F) AZ831: -40°C (-40°F) to 85°C (185°F) -40°C (-40°F) to 105°C (221°F) Silver nickel, gold plated < 100 milliohms initially 200 milliohms at end of life AZ821: 250 mW AZ831: 100 mW sc Power At Pickup Voltage (typical) Max. Continuous Dissipation 1.1 W at 20°C (68°F) Temperature Rise AZ821: 37°C (67°F) at nominal coil voltage AZ831: 18°C (32°F) at nominal coil voltage Storage Vibration 1.5 mm DA at 10–55 Hz Shock 10 g 11 ms 1/2 sine Enclosure P.B.T. polyester 94 V-O Terminals Tinned copper alloy Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) 2. Relay may pull in with less than “Must Operate” value. Max. Immersion Time 30 seconds 3. Other coil resistances and sensitivities available upon request. Weight 6 grams 4. Specifications subject to change without notice. Packing unit in pcs 25 per plastic tube / 1000 per carton box Temperature Max. 105°C (239°F) Di NOTES 1. All values at 20°C (68°F). ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2005-12-06 AZ821/AZ831 ! RELAY ORDERING DATA on tin ue d STANDARD COIL SPECIFICATIONS Nominal Coil VDC 5 6 9 12 24 48 Must Operate VDC 3.5 4.2 6.3 8.4 16.8 33.6 Max. Continuous VDC 6.3 8.9 12.5 17.8 34.4 67.3 Coil Resistance Ohm ± 10% 36 70 140 280 1,050 4,000 ORDER NUMBER AZ821–2C–5DE AZ821–2C–6DE AZ821–2C–9DE AZ821–2C–12DE AZ821–2C–24DE AZ821–2C–48DE SENSITIVE COIL SPECIFICATIONS Nominal Coil VDC 5 6 9 12 24 48 Must Operate VDC 3.5 Max. Continuous VDC 11.2 Coil Resistance Ohm ± 10% 125 ORDER NUMBER 4.2 13.5 180 AZ831–2C–6DSE 6.3 20.3 405 AZ831–2C–9DSE 8.4 27.0 720 AZ831–2C–12DSE AZ831–2C–5DSE 16.8 54.1 2,880 AZ831–2C–24DSE 33.6 108.3 11,520 AZ831–2C–48DSE MECHANICAL DATA sc Di Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2005-12-06