SBL1040CT THRU SBL1060CT SCHOTTKY BARRIER RECTIFIER Reverse Voltage - 40 to 60 Volts Forward Current - 10 Amperes TO-220AB 0.185(4.7) 0.150(3.8) 0.051(1.3) 0.047(1.2) 0.413(10.5) 0.374(9.5) 0.108(2.75) Max. 0.272(6.9) 0.228(5.8) 0.154(3.90) 0.146(3.70) 0.157(4.0) Max. 1 2 * Lead free product * Low forward voltage drop 0.610(15.5) 0.583(14.8) * High current capacity * High reliability * High surge current capability 3 * Epitaxial construction * Plastic Material-UL Recognition Flammability 0.583(14.8) 0.531(13.5) 0.126(3.2) Max. 0.051(1.3) 0.043(1.1) 0.024(0.6) FEATURES Classification 94V-0 0.022(0.56) Max. 0.014(0.36) 0.102(2.6) 0.091(2.3) MECHANICAL DATA Case : JEDEC TO-220AB molded plastic body Terminals : Plated Leads, solderable per 1 2 3 MIL-STD-750, Method 2026 Polarity : Molded on body Mounting Position : Any *Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS o Ratings at 25 C ambient temperature unless otherwise specified. SYMBOLS SBL1040CT SBL1045CT SBL1060CT UNITS Maximum repetitive peak reverse voltage VRRM 40 45 60 Volts Maximum RMS voltage VRMS 28 31.5 42 Volts VDC 40 45 60 Volts Maximum DC blocking voltage o Maximum average forward rectified current at TC = 75 C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load Maximum instantaneous forward voltage IF= @ 5 A I (AV) 10 Amps IFSM 150 Amps VF o Maximum DC reverse current @TC=25 C at rated DC blocking voltage @TC=125 C IR o 0.70 0.2 Volts mA 50 Typical junction capacitance (Note 1) CJ 250 pF RθJC 3.2 ℃/W TJ,TSTG -55 to +150 Typical thermal resistance (Note 2) Operating junction and storage temperature range 0.55 o C Note : 1. Measured at 1.0MHz and applied reverse voltage of 4.0V. 2. Thermal resistance junction to case. REV. 2 Zowie Technology Corporation RATINGS AND CHARACTERISTIC CURVES SBL1040CT THRU SBL1060CT FIG.1 - FORWARD CURRENT DERATING CURVE FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 175 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 12 10 8 6 4 2 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 150 125 100 75 50 25 0 0 0 25 50 75 100 125 150 1 10 o CASE TEMPERATURE, C FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4 - TYPICAL REVERSE CHARACTERISTICS 100 INSTANTANEOUS REVERSE LEAKAGE CURRENT, MILLIAMPERES 50 IINSTANTANEOUS FORWARD CURRENT, AMPERES 100 NUMBER OF CYCLES AT 60Hz SBL1040CT & SBL1045CT 10 SBL1060CT 1.0 o TJ=25 C 0.2 0.4 0.6 0.8 o 1.0 1.2 TJ=75 C 1.0 0.1 o TJ=25 C 0.01 0.001 0.1 0 o TJ=125 C 10 1.4 0 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,% FIG.5 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, pF 1000 100 10 0.1 1.0 10 100 REVERSE VOLTAGE, VOLTS REV. 2 Zowie Technology Corporation