A-BRIGHT AL

A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD.
SURFACE MOUNT LED LAMPS
0603 Package White SMD Chip LED Lamps (0.6mm Height)
Part Number: AL-HW436A
Package outlines & Re-flow Profile
„Reflow Temp/Time
„Soldering iron
Basic spec is U 5sec when 260℃. If temperature is higher,
time should be shorter (+10℃Æ -1sec ).Power dissipation of
iron should be smaller than 15W, and temperatures should
be controllable .Surface temperature of the device should be
under 230℃ .
For Reflow Soldering
ITEM
MATERIALS
Resin (mold)
Epoxy
Lens color
Yellow Diffused
Printed circuit board
BT
Dice
InGaN
Emitted color
White
NOTES:
1. All dimensions are in millimeters (inches);
2. Tolerances are ±0.1mm (0.004inch) unless otherwise noted.
3. Soldering terminal may shift in x, y direction.
4. Polarity referring on to the Cathode mark is reversed on the
red.
2006/10/18
A-BRIGHT
A-BRIGHT INDUSTRIAL CO., LTD.
SURFACE MOUNT LED LAMPS
Part Number: AL-HW436A
ELECTRO-OPTICAL CHARACTERISTICS
Parameter
(TA=25℃)
Test Symbol
Condition
Value
Min. Typ. Max.
120
Viewing angle at 50% IV
IF=20mA
2θ1/2
Forward voltage
IF=20mA
VF
--
Luminous intensity
IF=20mA
IV
80 150
Chromaticity Coordinates
IF=20mA
X
-- 0.31 --
Y
-- 0.32 --
IFP
100
Peak pulsing current (1/10 duty f=1kHz)
Absolute maximum ratings
Parameter
Unit
Deg
3.5 4.0
--
V
mcd
-mA
(TA=25℃)
Symbol
Value
Unit
Forward current
IF
30
mA
Reverse voltage
VR
5
V
Reverse current
IR
10
µA
Power Dissipation
PD
65
mW
Electrostatic Discharge
ESD
150
V
Operating temperature range
Top
-30 ~+80
℃
Storage temperature range
Tstg
-40 ~+85
℃
2006/10/18
A-BRIGHT
A-BRIGHT INDUSTRIAL CO., LTD.
SURFACE MOUNT LED LAMPS
Part Number: AL-HW436A
Test items and results of reliability
*Refer to reliability test standard specification for in this line.
2006/10/18
A-BRIGHT
A-BRIGHT INDUSTRIAL CO., LTD.
SURFACE MOUNT LED LAMPS
Part Number: AL-HW436A
Typical Optical-Electrical Characteristic Curves
2006/10/18
A-BRIGHT
A-BRIGHT INDUSTRIAL CO., LTD.
SURFACE MOUNT LED LAMPS
Part Number: AL-HW436A
Typical Optical-Electrical Characteristic Curves
2006/10/18