0910-150M 0910 – 150M 150 Watts - 48 Volts, 150µs, 5% Radar 890 - 1000 MHz GENERAL DESCRIPTION The 0910-150M is an internally matched, COMMON BASE transistor capable of providing 150 Watts of pulsed RF output power at 150 µs pulse width, 5% duty factor across the band 890 to 1000 MHz. This hermetically solder-sealed transistor is specifically designed for P-Band radar applications. It utilizes gold metallization to provide high reliability. CASE OUTLINE 55KT, STYLE 1 ABSOLUTE MAXIMUM RATINGS Maximum Power Dissipation @ 25oC Maximum Voltage and Current BVces Collector to Emitter Voltage BVebo Emitter to Base Voltage Ic Collector Current Maximum Temperatures Storage Temperature Operating Junction Temperature 400 Watts 65 Volts 3.5 Volts 12 Amps - 65 to + 200oC + 200oC ELECTRICAL CHARACTERISTICS @ 25 OC SYMBOL CHARACTERISTICS Pout Pg ηc Pd Rl VSWR1 VSWRs Power Out Power Gain Collector Efficiency Pulse Droop Input Return loss Load Mismatch Tolerance Load Mismatch - Stability TEST CONDITIONS MIN TYP Freq = 890 – 1000 MHz Vcc = 48 Volts Pin = 23 Watts 150 8.1 40 8.5 45 Pulse Width = 150µs Duty Factor = 5% -9 MAX UNITS 210 Watts dB % dB dB 0.5 3:1 2:1 Note 1: Pulse condition of 150µsec, 5%. Bvces Ices Iebo θjc1 Collector to Emitter Breakdown Collector to Emitter Leakage Emitter to Base Leakage Thermal Resistance Ic = 10 mA Vce = 50 Volts Vebo = 2.5 Volts Rated Pulse Condition 65 10 5.0 0.48 Volts mA mA o C/W Issue Mar 2005 ADVANCED POWER TECHNOLOGY INC. RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE. TO VERIFY THE CURRENT VERSION PLEASE CHECK OUR WEB SITE AT WWW. ADVANCEDPOWER.COM OR CONTACT OUR FACTORY DIRECT. Advanced Power Technology Inc. 3000 Oakmead Village Drive, Santa Clara, CA 95051-0808 Tel. 408 / 986-8031 Fax 408 /869-2324 0910-150M 0910– 150M Performance Curves – Pin v s. Pout Pin v s. Gain 270 12 11 240 210 10 937 MHz 9 1000 MHz 8 Gain(dB) Pout (W ) 180 890 MHz 150 120 90 60 30 7 6 5 4 890 MHz 3 937 MHz 2 1000 MHz 1 0 0 36 37 38 39 40 41 42 43 44 45 46 37 38 39 40 Pin (dBm) 41 42 43 44 45 46 Pin (dBm) Pin v s. Efficie ncy 70.00 60.00 Efficiency(%) 50.00 40.00 890 MHz 30.00 937 MHz 1000 MHz 20.00 10.00 0.00 37 38 39 40 41 42 43 44 45 46 Pin (dBm) Impedance Information Input Matching Circuit Output Matching Circuit 50 Ohms 50 Ohms ZSource Frequencies (MHz) Note 2: Z Load Z Source (Ω) 890 4.0 - j4.2 937 4.0 - j3.5 1000 4.1 - j2.5 exclusive of C1 and C4 on the test circuit ZLoad Z Load (Ω) 2 1.85 – j3.2 1.97 – j3.0 2.1 – j3.0 ADVANCED POWER TECHNOLOGY INC. RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE. TO VERIFY THE CURRENT VERSION PLEASE CHECK OUR WEB SITE AT WWW. ADVANCEDPOWER.COM OR CONTACT OUR FACTORY DIRECT. Advanced Power Technology Inc. 3000 Oakmead Village Drive, Santa Clara, CA 95051-0808 Tel. 408 / 986-8031 Fax 408 /869-2324 0910-150M 0910– 150M Test Circuit ADVANCED POWER TECHNOLOGY INC. RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE. TO VERIFY THE CURRENT VERSION PLEASE CHECK OUR WEB SITE AT WWW. ADVANCEDPOWER.COM OR CONTACT OUR FACTORY DIRECT. Advanced Power Technology Inc. 3000 Oakmead Village Drive, Santa Clara, CA 95051-0808 Tel. 408 / 986-8031 Fax 408 /869-2324 0910-150M 0910– 150M Case Outline ADVANCED POWER TECHNOLOGY INC. RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE. TO VERIFY THE CURRENT VERSION PLEASE CHECK OUR WEB SITE AT WWW. ADVANCEDPOWER.COM OR CONTACT OUR FACTORY DIRECT. Advanced Power Technology Inc. 3000 Oakmead Village Drive, Santa Clara, CA 95051-0808 Tel. 408 / 986-8031 Fax 408 /869-2324