CdS Photoconductive Photocells PDV-P9200 PACKAGE DIMENSIONS INCH [mm] PACKAGE DIMENSIONS INCH [mm] ±.010 [0.25] .138 [3.50] +.015 [0.38] -.010 [0.25] .079 [2.00] EPOXY ON LEADS 3 mm MAX 2X Ø.016 [0.40] .100 [2.54] PLASTIC COATED ±.010 [0.25] Ø.165 [4.19] 2X 1.023 [26.0] CERAMIC PACKAGE FEATURES DESCRIPTION APPLICATIONS • Visible light response • Sintered construction • Low cost The PDV-P9200 are (CdS), Photoconductive photocells designed to sense light from 400 to 700 nm. These light dependent resistors are available in a wide range of resistance values. They’re packaged in a two leaded plastic-coated ceramic header. • Camera exposure • Shutter controls • Night light Controls ABSOLUTE MAXIMUM RATING (TA)= 23°C UNLESS OTHERWISE NOTED SYMBOL PARAMETER MIN MAX Vpk Applied Voltage 150 Pd Δpo/Δt Continuous Power Dissipation 90 TO Operating and Storage Temperature TS Soldering Temperature* -30 +75 +260 UNITS V mW/°C °C °C * 0.200 inch from base for 3 seconds with heat sink. ELECTRO-OPTICAL CHARACTERISTICS RATING (TA)= 23°C UNLESS OTHERWISE NOTED SYMBOL RD RI S lrange lpeak tr Tf CHARACTERISTIC TEST CONDITIONS After 10 sec. @ 10 Lux @ 2856 °K 10 Lux @ 2856 °K LOG(R100)-LOG(R10)** Sensitivity LOG(E100)-LOG(E10)*** Spectral Application Range Flooded Spectral Application Range Flooded Rise Time 10 Lux @ 2856 °K Fall Time After 10 Lux @ 2856 °K Dark Resistance Illuminated Resistance MIN TYP 5 10 MAX 50 W/Lux 0.9 400 700 520 70 15 UNITS MW KW nm nm ms ms **R100, R10: cell resistances at 100 Lux and 10 Lux at 2856 °K respectively . ***E100, E10: luminances at 100 Lux and 10 Lux at 2856 °K respectively. Information in this technical datasheet is believed to be correct and reliable. However, no responsibility is assumed for possible inaccuracies or omission. Specifications are subject to change without notice. REV 3/30/06