DATA SHEET Part Number: SL15 0R712 Ordering Different Lead Types: Inside Kinked Leads Outside Kinked Leads Use -A after Ametherm’s part # Use -B after Ametherm’s part # For example: to order an inside kinked lead use part number SL15 0R712-A D D D T C B L S S S STRAIGHT LEADS OUTSIDE KINKED LEADS INSIDE KINKED LEADS Electrical Specifications: Mechanical Specifications: Resistance @ 25°C Max Steady State Current Up to 65°C Max Recommended Energy Rating (Joules) Actual Failure Point of Instantaneous Energy (Joules) Resistance @ 100% of Max Current Resistance @ 50% of Max Current Body Temperature @ 100% Current Rating Dissipation Constant Thermal Time Constant Material Type Max Recommended Capacitance @ 120VAC/240VAC 0.70 Ω ± 25% 12.0 A 45.0 J 90.0 J 0.025 Ω 0.067 Ω 192 °C 15.9mW/°C 54 seconds “A” 3100µF/750µF CSA File Number: #CA118061 D T Lead Diameter S L Inside Kink Dimension B C Coating Run Down on the Straight Leads 15.0 ± 0.7 mm 4.5 ± 0.5 mm 0.8 ± 0.1 mm 7.8 ± 2.0 mm 38.0 ± 9.0 mm See Dimension B Below 7.50 ± 0.70 mm 2.82 ± 0.5 mm 5.00 ± 0.5 mm Revision Date: April 13, 2005 Ametherm, Inc. 3111 N. Deer Run Road #4 Carson City, NV 89701 Telephone: (800) 808-2434 (775) 884-2434 Fax: (775) 884-0670 www.ametherm.com