SIL30E Series 12 Vin Single Output DC-DC CONVERTERS Non-isolated POL Converter 1 NEW Product • • • • • • • 30 A current rating Input voltage range: 8 Vdc to 14 Vdc Output voltage range: 0.8 Vdc to 3.63 Vdc Ultra high efficiency: 93% @ 12 Vin and 3.3 Vout Extremely low internal power dissipation Minimal thermal design concerns Designed in reliability: MTBF of 4,435,000 hours per Telcordia SR-332 • Ideal solution where board space is at a premium or tighter card pitch is required • Available RoHS compliant The SIL30E series are non-isolated dc-dc converters packaged in a single-in-line footprint giving designers a cost effective solution for conversion from a 12 V source. The SIL30E has a wide input range (8 Vdc to 14 Vdc) and offers a wide 0.8 Vdc to 3.63 Vdc output voltage range with a 30 A load, which allows for maximum design flexibility and a pathway for future upgrades. The SIL30E is designed for applications that include distributed power, workstations, optical network and wireless applications. Implemented using state of the art surface-mount technology and automated manufacturing techniques, the SIL30E offers compact size and efficiencies of up to 93%. 2 YEAR WARRANTY All specifications are typical at 12 Vin and 1.5 Vout, full load at 25 °C unless otherwise stated Cout = 100 µF EMC CHARACTERISTICS OUTPUT SPECIFICATIONS Voltage adjustability 0.8-3.63 Vdc Setpoint accuracy ±1.3% typ. Line regulation ±0.2% typ. Load regulation ±1.5% typ. Total error band ±3.0% typ. Minimum load 0A Overshoot/undershoot Ripple and noise None 5 Hz to 20 MHz Temperature coefficient Transient response Slew rate = 0.5 A/µs 50 mV pk-pk 25 mV rms ±0.01%/ºC Vout = 1.5 V Remote sense SPECIFICATIONS 50% to 75% load step 3% max. deviation 10 µs recovery to within ±1.0% 10% Vo compensation Electrostatic discharge Conducted immunity Radiated immunity EN61000-4-2, IEC801-2 EN61000-4-6 EN61000-4-3 GENERAL SPECIFICATIONS Efficiency @ 12 Vin, 3.3 Vout Insulation voltage Switching frequency Non-isolated Fixed 1.3 MHz typ. Approvals and standards EN60950-1 UL/cUL60950-1 Material flammability Dimensions UL94V-0 (LxWxH) 50.84 x 7.80 x 12.70 mm 2.000 x 0.307 x 0.500 inches Pin length 0.140 in (3.56 mm) Weight MTBF 93% typ. 7.0 g (0.25 oz) Telcordia SR-332 4,435,000 hours INPUT SPECIFICATIONS Input voltage range Input current 8-14 Vdc No load (max.) Input current (max.) 250 mA Thermal performance 9.2 A max. @ Io max. and Vout = 3.3 V Input reflected ripple 220 mA rms Remote ON/OFF (See Note 1) Start-up time ENVIRONMENTAL SPECIFICATIONS 20 ms Operating ambient, temperature Non-operating -40 ºC to +85 ºC -40 ºC to +125 ºC PROTECTION Short-circuit Thermal Continuous Automatic recovery International Safety Standard Approvals UL/cUL CAN/CSA 22.2 No. EI74104 UL 60950 File No. EI74104 TÜV Product Service (EN60950) Certificate No. B05 06 38572 055 CB report and certificate to IEC60950 File Name: sil30e_12.pdf Rev (02): 16 Dec 2005 SIL30E Series 12 Vin Single Output DC-DC CONVERTERS Non-isolated POL Converter 2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm OUTPUT POWER (MAX.) INPUT VOLTAGE OUTPUT VOLTAGE 99 W 8-14 Vdc 0.8-3.63 Vdc Part Number System with Options NEW Product OUTPUT CURRENT (MIN.) OUTPUT CURRENT (MAX.) EFFICIENCY (TYP.) LINE LOAD MODEL NUMBER (2,3) 0A 30 A 93% ±0.2% ±1.5% SIL30E-12W3V3-VJ REGULATION SIL30E-12W3V3-VJ Product Family SIL = Single In Line Packaging Options J = Pb-free (RoHS 6/6 compliant) (2) Rated Output Current 30 = 30 Amps Mounting Option V = Vertical Performance E = Enhanced Performance Output Voltage 0.8 Vdc to 3.63 Vdc Type of Output W = Wide Input Voltage 12 = 8 Vdc to 14 Vdc Output Voltage Adjustment of the SIL30E-12W3V3 Series The ultra-wide output voltage trim range offers major advantages to users who select the SIL30E-12W3V3. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.8 Vdc to 3.63 Vdc. When the SIL30E-12W3V3 converter leaves the factory the output has been adjusted to the default voltage of 0.8 V. Notes Notes 1 A The derating curve represents the condition at which internal components are within the Artesyn derating guidelines. B Characteristic data has been developed from actual products tested at 25 °C. This data is considered typical data for the converter. The SIL30E features a ‘Positive Logic’ Remote ON/OFF operation. If not using the Remote ON/OFF pin, leave the pin open (the converter will be on). The Remote ON/OFF pin is referenced to ground. The following conditions apply for the SIL30E: Configuration Remote pin open circuit Remote pin pulled low [Von/off < 0.8 V] Remote pin pulled high [Von/off >2.8 V] 2 3 Converter Operation Unit is ON Unit is OFF Unit is ON A ‘Negative Logic’ Remote ON/OFF version is also possible with this converter. Please consult the factory for details. TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative. File Name: sil30e_12.pdf Rev (02): 16 Dec 2005 SIL30E Series 12 Vin Single Output DC-DC CONVERTERS Non-isolated POL Converter 3 40 30 0m s 1m s 2m s 20 10 0 0 20 40 60 80 OUTPUT CURRENT (A) OUTPUT CURRENT (A) For the most current data and application support visit www.artesyn.com/powergroup/products.htm 40 30 0ms 1ms 2ms 20 10 0 100 0 AMBIENT TEMPERATURE (ºC) 0ms 1ms 2ms 20 10 0 60 80 OUTPUT CURRENT (A) OUTPUT CURRENT (A) 30 40 40 60 80 40 30 0ms 1ms 2ms 20 10 0 0 100 20 40 60 80 100 AMBIENT TEMPERATURE (ºC) AMBIENT TEMPERATURE (ºC) Figure 4 - Derating Curve Vin = 12 V, Output Voltage = 3.3 V (See Note A) Figure 3 - Derating Curve Vin = 12 V, Output Voltage = 2.5 V (See Note A) 100 EFFICIENCY (%) 100 Figure 2 - Derating Curve Vin = 12 V, Output Voltage = 1.8 V (See Note A) 40 20 20 AMBIENT TEMPERATURE (ºC) Figure 1 - Derating Curve Vin = 12 V, Output Voltage = 1.5 V (See Note A) 0 NEW Product Remote sense + Vin 80 Vout = 1V0 Vout = 1V5 Vout = 1V8 Vout = 2V0 Vout = 2V5 Vout = 3V3 60 40 20 Vout SIL30E Remote ON/OFF Trim Load Cin 47µF RTRIM Cout 100µF (Required) Gnd 0 0 5 10 15 20 25 30 OUTPUT CURRENT (A) Figure 5 - Efficiency vs Load Current Figure 6 - Standard Application Vin = 12 V (See Note B) File Name: sil30e_12.pdf Rev (02): 16 Dec 2005 SIL30E Series 12 Vin Single Output DC-DC CONVERTERS Non-isolated POL Converter 4 For the most current data and application support visit www.artesyn.com/powergroup/products.htm NEW Product SIDE VIEW 0.307±0.008 (7.80±0.20) 0.500±0.020 (12.7±0.50) PCB FRONT VIEW 0.140 (3.56) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 20 0.050 (1.27) 0.100±0.005 (2.54±0.127) typ. 0.132 (3.36) 0.025 (0.64) x 0.025 (0.64) Connector 19 Places 1.900 (48.26) 2.000±0.020 (50.84±0.50) All dimensions in inches (mm) All tolerance ±0.010in (±0.25mm) unless otherwise stated PIN CONNECTIONS PIN NO. FUNCTION PIN NO. FUNCTION 1 Vin 11 Vout 2 Vin 12 Vout 3 Ground 13 Remote ON/OFF 4 Ground 14 Ground 5 Trim 15 Ground 6 Remote Sense+ 16 Ground 7 Ground 17 Ground 8 Ground 18 Vin 9 Vout 19 N/C 10 Vout 20 Vin Figure 7 - Mechanical Drawing and Pinout Table Datasheet © Artesyn Technologies® 2005 The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. The information and specifications contained or described herein are subject to change in any manner at any time without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. Please consult our website for the following items: Application Note www.artesyn.com File Name: sil30e_12.pdf Rev (02): 16 Dec 2005