SIL10E Series 3.0 Vin to 5.5 Vin single output DC-DC CONVERTERS E Class Non-isolated 1 NEW Product • • • • • • • 10 A Current rating Input voltage range: 3.0 Vdc to 5.5 Vdc Output voltage range: 0.8 Vdc to 3.63 Vdc Ultra high efficiency: 96% @ 5 Vin and 3.3 Vout Extremely low internal power dissipation Minimal thermal design concerns Designed in reliability: MTBF of >7 million hours per Telcordia SR-332 • Ideal solution where board space is at a premium or tighter card pitch is required • Industry standard footprint and pin out • Available RoHS compliant The SIL10E series are non-isolated dc-dc converters packaged in a single-in-line footprint giving designers a cost effective solution for conversion from either a 5 V or a 3.3 V source. The SIL10E offers a range of fixed outputs and one wide trim output unit at an industry leading 10 A which allows maximum design flexibility and a pathway for future upgrades. The SIL10E is designed for applications that include distributed power, workstations, optical network and wireless applications. Implemented using state of the art surface mount technology and automated manufacturing techniques, the SIL10E offers compact size and efficiencies of up to 96%. 2 YEAR WARRANTY SPECIFICATIONS All specifications are typical at nominal input, full load at 25 °C unless otherwise stated OUTPUT SPECIFICATIONS Voltage adjustability (See Note 1) EMC CHARACTERISTICS Fixed output versions 5 Vin with wide trim 3.3 Vin with wide trim ±10% 0.8-3.63 Vdc 0.8-2.75 Vdc Setpoint accuracy ±0.4% Line regulation ±0.2% Load regulation ±1.0% Minimum load 0A Overshoot/undershoot None Ripple and noise 0 to 20MHz BW 50 mV pk-pk 25 mV rms max. Temperature co-efficient ±0.01%/ºC Transient response 50 mV max. deviation 50 µs recovery to within ±1.0% Remote sense 10% Vo compensation Input voltage range EN61000-4-2, IEC801-2 EN61000-4-6 EN61000-4-3 GENERAL SPECIFICATIONS Efficiency See table Insulation voltage Switching frequency Non-isolated Fixed 300 kHz typ. Approvals and standards EN60950 UL/cUL60950 Material flammability UL94V-0 Dimensions (vertical version) (LxWxH) Pin length (Vertical) 0.135 ±0.02 in (3.43 ±0.5 mm) 50.8 x 7.8 x 12.7 mm 2.0 x 0.31 x 0.5 inches Weight MTBF INPUT SPECIFICATIONS Input current Electrostatic discharge Conducted immunity Radiated immunity 5 g (0.18 oz) Telcordia SR-332 MIL-HDBK-217F 7,042,000 hours 680,000 hours 3.0-5.5 Vdc No load 70 mA Input current (max.) 8 A max. @ Io max. and Vout = 3.3 V Input current ripple 65 mA rms Remote ON/OFF (See Note 2) Start-up time 20 ms International Safety Standard Approvals ENVIRONMENTAL SPECIFICATIONS Thermal performance (See Note 3) Operating ambient, temperature Non-operating -40 ºC to +100 ºC -40 ºC to +125 ºC PROTECTION Short-circuit Thermal Continuous Automatic recovery UL/cUL CAN/CSA-C22.2 No. 60950-1-03/UL 60950-1, File No. E174104 TÜV Product Service (EN60950) Certificate No. B 03 10 38572 037 CB Report and Certificate to IEC60950, Certificate No. DE3-51686M1 File Name: sil10e_05.pdf Rev (04): 16 Dec 2005 SIL10E Series 3.0 Vin to 5.5 Vin single output DC-DC CONVERTERS E Class Non-isolated2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm NEW Product OUTPUT POWER (MAX.) INPUT VOLTAGE OUTPUT VOLTAGE OUTPUT CURRENT (MIN.) OUTPUT CURRENT (MAX.) EFFICIENCY (TYP.) LINE LOAD MODEL NUMBER (4,5,6) 8.8 W 3.-5.5 V 0.8 V 0A 10 A 83% ±0.2% ±1.5% SIL10E-05S0V8-VJ 11 W 3.0-5.5 V 1V 0A 10 A 86% ±0.2% ±1.5% SIL10E-05S1V0-VJ 13.2 W 3.0-5.5 V 1.2 V 0A 10 A 88% ±0.2% ±1.0% SIL10E-05S1V2-VJ 16.5 W 3.0-5.5 V 1.5 V 0A 10 A 90% ±0.2% ±1.0% SIL10E-05S1V5-VJ 19.8 W 3.0-5.5 V 1.8 V 0A 10 A 92% ±0.2% ±1.0% SIL10E-05S1V8-VJ 22 W 3.0-5.5 V 2V 0A 10 A 93% ±0.2% ±1.0% SIL10E-05S2V0-VJ 27.5 W 3.0-5.5 V 2.5 V 0A 10 A 94% ±0.2% ±1.0% SIL10E-05S2V5-VJ 36.3 W 4.5-5.5 V 3.3 V 0A 10 A 95% ±0.2% ±1.0% SIL10E-05S3V3-VJ 36.3 W 4.5-5.5 V 0.8-3.63 V 0A 10 A 95% ±0.2% ±1.0% SIL10E-05W3V3-VJ Part Number System with Options REGULATION SIL10E-05S3V3-VJ Product Family SIL = Single In Line Packaging Options (5) J = Pb-free (RoHS 6/6 compliant) Rated Output Current 10 = 10 Amps Mounting Option V = Vertical Mount H = Horizontal Mount Performance E = Enhanced Performace Output Voltage 2.5 V, 3.3 V etc Input Voltage 05 = 3.0 V to 5.5 V 12 = 10 V to 14 V Number of Outputs S = Single W = Wide OutOpuuttpV taoglteagAedjAud sjtumsetm nteonft tohfethSeILS1I0L-1005E W-0 x5 xx esSeries uo t lV WS 3e Vr3iJ The ultra-wide output voltage trim range offers major advantages to users who select the SIL10E-05W3V3J. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.8 Vdcto 3.63 Vdc. When the SIL10E-05W3V3J converter leaves the factory the output has been adjusted to the default voltage of 3.3 V. • When Vin ≥ 4.5 V, then Vout can be adjusted from 0.8 Vdc to 3.6 Vdc • When Vin < 4.5 V, then Vout can be adjusted from 0.8 Vdc to 2.75 Vdc Notes Notes Cond. 1 3 2 When Vin ≥ 4.5 V, then Vout can be adjusted from 0.8 V to 3.6 V. When Vin < 4.5 V, then Vout can be adjusted from 0.8 V to 2.75 V. The SIL10E features a ‘Negative Logic’ Remote ON/OFF operation. If you are not using the Remote ON/OFF pin, leave the pin open (the converter will be on). The Remote ON/OFF pin is referenced to ground. 4 5 The following conditions apply for the SIL10E: Configuration Remote pin open circuit Remote pin pulled low Remote pin pulled high [Von/off >1.2 V] Converter Operation Unit is ON Unit is ON Unit is OFF 6 Full derating curves available in both the Longform Datasheet and Application Note 136. For certain applications that use low ESR capacitors on the output of the convertor and to insure maximum converter stability, please add the suffix ‘02’ to the model, e.g. SIL10E-05S2V5-V02J. TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative. A ‘Positive Logic’ Remote ON/OFF version is also possible with this converter. To order please place the suffix ‘R’ towards the end of the model number e.g. SIL10E-05S3V3-VRJ. File Name: sil10e_05.pdf Rev (04): 16 Dec 2005 SIL10E Series 3.0 Vin to 5.5 Vin single output DC-DC CONVERTERS E Class Non-isolated 3 For the most current data and application support visit www.artesyn.com/powergroup/products.htm NEW Product PIN VIEW 2.000 ±0.020 (50.80 ±0.50) J1 PIN CONNECTIONS PIN NUMBER FUNCTION 1 +Vout 2 +Vout 3 Remote Sense (+) 4 +Vout 5 Ground 0.316 ±0.008 (8.03 ±0.20) 0.500 (12.70) PCB 0.025 ± 0.001 (0.64 ±0.02) SIDE VIEW 6 5 3 2 5 1 J2 4 3 2 1 J1 0.100 (2.54) 0.170 (4.32) 1.900 (48.26) 0.050 (1.27) Dimensions in Inches (mm) Tolerances (unless otherwise specified) 2 Place ±0.15 3 Place ±0.006 Figure 1: Mechanical Drawing - Horizontal Mount Version J2 PIN CONNECTIONS PIN NUMBER FUNCTION 1 Ground 2 +Vin 3 +Vin 4 No Pin 5 Trim 6 Remote ON/OFF SIDE VIEW FRONT VIEW 0.307 ±0.008 (7.80 ±0.20) 2.000 ±0.020 (50.80 ±0.50) 0.500 (12.70) PCB 0.135 (3.43) 0.635 (16.13) 1 2 3 J1 4 5 1 0.025 ± 0.001 (0.64 ±0.02) 0.168 (4.26) 2 3 5 6 J2 0.100 (2.54) 0.050 (1.27) 1.900 (48.26) Dimensions in Inches (mm) Tolerances (unless otherwise specified) 2 Place ±0.15 3 Place ±0.006 Figure 2: Mechanical Drawing - Vertical Mount Version Datasheet © Artesyn Technologies® 2005 The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. Please consult our website for the following items: Application Note Longform Datasheet www.artesyn.com File Name: sil10e_05.pdf Rev (04): 16 Dec 2005