S78DL05F Semiconductor Low Drop output Voltage Regulator Descriptions • Three Terminal Positive Low Dropout Voltage Regulator Features • Low Standby Current Consumption (500 ㎂ Typ.) • Maximum Output Current (150 ㎃ Max.) • Low Dropout Voltage (0.7V Max.) Ordering Information Type NO. Marking S78DL05F 85□□ Package Code SOT-89 □□: Monthly Code, Weekly Code Outline Dimensions (unit : mm ) ■Functional Block Diagram PIN Connections 1. Output 2,4. GND 3. Input KSI-8045-002 1 S78DL05F Maximum ratings Ta=25°C Characteristic Symbol Rating Unit Input voltage VIN 18 V Power Dissipation PD 500 mW Junction Temperature Tj 150 °C Tstg -55~150 °C Storage Temperature Range Electrical Characteristics (※ VIN=10V, IOUT=10 ㎃, Ta =25°C) Characteristic Output voltage Symbol Test Condition Min. Typ. Max. Unit VOUT VIN=6V~13V 4.8 5 5.2 V Voltage Regulation Δ VOUT(1) VIN=6V~13V - 10 30 mV Load Regulation Δ VOUT(2) IOUT=10~100mA - 12 50 mV IOUT≤ 10mA , VIN=6V~13V - 0.5 1 mA IOUT=50mA - 0.3 0.5 IOUT=100mA - 0.5 0.7 Quiescent Current Dropout Voltage IQC VDROP V ■Test circuit KSI-8045-002 2 S78DL05F The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSI-8045-002 3