SAB5370 Semiconductor Dual LED Lamp Features • • • • Colorless transparency lens type φ5mm(T-13/4) all plastic mold type Radiation color (Amber, Blue) Low power consumption Outline Dimensions unit : mm PIN Connections 1.Blue 2.Common Cathode 3.Amber KLD-4009-000 1 SAB5370 Absolute maximum ratings Characteristic Symbol Ratings Unit Power Dissipation PD 85 mW Forward Current IF 30 mA IFP 50 mA Reverse Voltage VR 4 V Operating Temperature Topr -25∼85 ℃ Storage Temperature Tstg -30∼100 ℃ 1 * Peak Forward Current 2 260℃ for 5 seconds * Soldering Temperature Tsol *1.Duty ratio = 1/16, Pulse width = 0.1ms *2.Keep the distance more than 2.0mm from PCB to the bottom of LED package Electrical Characteristics Characteristic Forward Voltage Symbol VF *3Luminous Intensity IV Peak Wavelength λP Spectrum Bandwidth Reverse Current Half angle Δλ Test Condition Blue Amber Blue Amber Blue Amber Blue Amber IF= 20mA IF= 20mA IF= 20mA IF= 20mA Min. Typ. Max. - 3.3 1.8 200 200 470 630 30 35 3.7 2.3 - Unit V mcd nm nm IR VR=4V - - 10 uA θ1/2 IF= 20mA - ±20 - deg *3. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity KLD-4009-000 2 SAB5370 Fig. 2 IV - IF Forward Current IF [mA] Luminous Intensity Iv [mcd] Fig. 1 IF - VF Forward Voltage VF [V] Forward Fig.4 Spectrum Distribution Forward Relative Intensity [%] Current IF [mA] Fig. 3 IF – Ta Current IF [mA] Ambient Temperature Ta [℃] Wavelength λ [nm] Fig. 5 Radiation Diagram Relative Luminous Intensity Iv [%] KLD-4009-000 3 SAB5370 These AUK products are intended for usage in general electronic equipments(Office and communication equipment, measuring equipment, domestic electrification, etc.). Please make sure that you consult with us before you use these AUK products in equipments which require high quality and/or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, traffic signal, combustion central, all types of safety device, etc.). AUK cannot accept liability to any damage which may occur in case these AUK products were used in the mentioned equipments without prior consultation with AUK. KLD-4009-000 4