AVAGO HSMX-A2-XX

HSMx-A2-xx-xxxxx Bi-Color
HSMx-A3xx-xxxxx Tri-Color
Surface Mount LED Indicators,
PLCC-4 SMT LEDs
Data Sheet
Description
Features
This family of SMT LEDs is packaged in the industry
standard PLCC-4 package. These SMT LEDs have high
reliability performance and are designed to work under
a wide range of environmental conditions. This high
reliability feature makes them ideally suited to be used
under harsh interior automotive as well as interior signs
application conditions.
• Industry Standard PLCC-4 package (Plastic Leaded
Chip Carrier)
• High reliability LED package
• High brightness using AlInGaP and InGaN dice technologies
• Available in full selection of colors
• Super wide viewing angle at 120°
• Available in 8 mm carrier tape on 7-inch reel
• Compatible with IR soldering process
To facilitate easy pick and place assembly, the LEDs are
packed in EIA-compliant tape and reel. Every reel will be
shipped in single intensity and color bin, except red color
to provide close uniformity.
These LEDs are compatible with IR and TTW solder reflow
process.
This super wide viewing angle at 120° together with
the built in reflector pushing up the intensity of the
light output makes these LED suitable to be used in the
interior electronics signs. The flat top emitting surface
makes it easy for these LEDs to mate with light pipes.
This is suitable for general backlighting in automo­tive
interior, office equipment, industrial equipment, and
home appliances.
Applications
• Electronic signs and signals
– Interior full color sign
– Variable message sign
• Interior automotive
– Instrument cluster backlighting
– Central console backlighting
– Cabin backlighting
• Office automation, home appliances, industrial
equipment
– Front panel backlighting
– Display backlighting
CAUTION: HSMF-Axxx-xxxxx LEDs are Class 2 ESD sensitive. Please observe appropriate precautions
during handling and processing. Refer to Avago Application Note AN-1142 for additional details.
Package Dimensions
2.8 ± 0.2
1.9 ± 0.2
2.2 ± 0.2
(2)
0.1 TYP.
0.8 ± 0.1
(3)
3.2 ± 0.2
3.5 ± 0.2
0.8 ± 0.3
(1)
(4)
0.5 ± 0.1
CATHODE MARKING
0.7 ± 0.1
NOTE:
1. ALL DIMENSIONS IN mm.
Tri Color 1 Cathode (Color 1)
2 Common Anode
3 Cathode (Color 3)
4 Cathode (Color 2)
Bi Color
1 Cathode (Color 1)
2 Anode (Color 1)
3 Cathode (Color 2)
4 Anode (Color 2)
Device Selection Guide
Bi Color
Part Number
Color 1
Color 2
HSMF-A201- xxxxx
GaP Red
GaP Yellow Green
HSMF-A202- xxxxx
GaP Red
GaP Yellow
HSMF-A203- xxxxx
GaP Red
GaP Emerald Green
HSMF-A204- xxxxx
GaP Orange
GaP Yellow Green
HSMF-A205- xxxxx
GaP Orange
GaP Emerald Green
HSMF-A206- xxxxx
GaP Yellow
GaP Yellow Green
HSMF-A211- xxxxx
AlGaAs Red
GaP Yellow Green
HSMF-A212- xxxxx
AlGaAs Red
GaP Yellow
HSMF-A222- xxxxx
AlInGaPRed
AlInGaP Amber
HSMF-A227- xxxxx
AlInGaP Red
GaN Blue
HSMF-A228- xxxxx
AlInGaP Amber
GaN Blue
HSMF-A226- xxxxx
AlInGaP Amber
AlInGaP Yellow Green
Color 1 Color 2
Min. Iv @ 20 mA
Typical Iv @ 20 mA
Min. Iv @ 20 mA
­Part Number
Bin ID
(mcd)
(mcd)
Bin ID
(mcd)
Typical Iv @ 20 mA
(mcd)
­HSMF-A201-A00J1
K2
8.0
16.0
L1
10.0
20.0
­HSMF-A202-A00J1
K2
8.0
16.0
K1
6.3
12.0
­HSMF-A203-A00J1
K2
8.0
16.0
J1
4.0
8.0
­HSMF-A204-A00J1
K2
8.0
16.0
L1
10.0
20.0
­HSMF-A205-A00J1
K2
8.0
16.0
J1
4.0
8.0
­HSMF-A206-A00J1
K2
8.0
16.0
L1
10.0
20.0
­HSMF-A211-A00J1
L2
12.5
25.0
L1
10.0
20.0
­HSMF-A212-A00J1
L2
12.5
25.0
K1
6.3
12.0
­HSMF-A222-A00J1
P1
40.0
80.0
P1
40.0
80.0
­HSMF-A227-A00J1
P1
40.0
80.0
J2
5.0
10.0
­HSMF-A228-A00J1
P1
40.0
80.0
J2
5.0
10.0
HSMF-A226-A00J1
P2
49.0
100.0
M2
20.0
60.0
Note:
1. The luminous intensity Iv, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be aligned with this axis.
Tri Color
Part Number
Color 1
Color 2
Color 3
GaP Red
GaP Yellow GreenGaN Blue
HSMF-A331-xxxxx
AlInGaP Red
InGaN Green
GaN Blue
HSMF-A332-xxxxx
AlInGaP Red Orange
InGaN Green GaN Blue
HSMF-A341-xxxxx
AllnGaP Red
InGaN Green
InGaN Blue
HSMF-A342-xxxxx
AllnGaP Red Orange
InGaN Green
InGaN Blue
HSMF-A301-xxxxx
Color 1 Color 2 Color 3
Min. Iv
Typical Iv
Min. Iv
Typical Iv
Min. Iv
@ 20 mA
@ 20 mA
@ 20 mA
@ 20 mA
@ 20 mA
Part Number
Bin ID (mcd)
(mcd)
Bin ID (mcd)
(mcd)
Bin ID (mcd)
Typical Iv
@ 20 mA
(mcd)
HSMF-A301-A00J1
K2 HSMF-A331-A00J1
8.0
13.0
L2 P1 40.0
80.0
HSMF-A332-A00J1
P1 40.0
HSMF-A341-A00J1
HSMF-A342-A00J1
12.5
20.0
K2 8.0
10.0
R1 99.0
160.0
K2 8.0
10.0
80.0
R1 99.0
160.0
K2 8.0
10.0
P1 40.0
80.0
R1 99.0
160.0
N1 25.0
40.0
P1 40.0
80.0
R1 99.0
160.0
N1 25.0
40.0
Note:
1. The luminous intensity Iv, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be aligned with this axis.
Part Numbering System
HSM x 1 – A x 2 x 3 x 4 – x 5 x 6 x 7 x 8 x 9
Packaging Option
Color Bin Selection
Intensity Bin Select
Device Specification Configuration
Package Type
LED Chip Color
Absolute Maximum Ratings (TA = 25°C)
Parameters
GaP
AlGaAs
DC Forward Current[1]
30 mA
30 mA
30 mA[3,4]
20 mA[4]
Peak Forward Current[2]
100 mA
100 mA
100 mA
100 mA
100 mA
Power Dissipation
78 mW
78 mW
72 mW
48 mW
120 mW
Red, Amber
AlInGaP
Yellow Green GaN/InGaN
20 mA
Reverse Voltage
5 V
Junction Temperature
110°C
Operating Temperature
–55°C to +100°C
Storage Temperature
Notes:
–55°C to +100°C
1. 2. 3. 4. Derate linearly as shown in figure 4.
Duty factor = 10%, Frequency = 1kHz.
Drive Current between 10 mA and 30 mA are recommended for best long term performance.
Operation at current below 5 mA is not recommended.
Optical Characteristics (TA = 25°C)
Color
Peak Wavelength
λPEAK (nm)
Typ.
Dominant
Wavelength
Viewing Angle
λD (nm)[1]
2θ1/2 (Degrees)[2]
Typ.
Typ.
Luminous
Efficacy ηv
(lm/W)[3]
Typ.
Luminous Intensity/
Total Flux
Iv (mcd) /Φv (mlm)
Typ.
GaP Red
635
626
120
120
0.45
AlGaAs Red
645
637
120
63
0.45
AlInGaP Red
635
626
120
150
0.45
AlInGaP Red Orange
621
615
120
240
0.45
GaP Orange
600
602
120
380
0.45
AlInGaP Amber
592
590
120
480
0.45
GaP Yellow
583
585
120
580
0.45
AlInGaP Amber
592
590
120
480
0.45
GaP Yellow Green
565
569
120
590
0.45
GaP Emerald Green
558
560
120
650
0.45
InGaN Green
523
525
120
500
0.45
InGaN Blue
468
470
120
75
0.45
GaN Blue
428
462
120
65
0.45
AlInGaP Yellow Green
Notes:
575
571
120
620
0.45
1. The dominant wavelength, λD, is derived from the CIE Chromaticity Diagram and represents the color of the device.
2. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity.
3. Radiant intensity, Ie in watts/steradian, may be calculated from the equation Ie = Iv/ηv, where Iv is the luminous intensity in candelas and ηv is the luminous efficacy in lumens/watt.
Electrical Characteristics (TA = 25°C)
Dice Technology
Forward Voltage
VF (Volts) @ IF = 20mA
Typ.
Max.
Reverse Voltage
VR @ 100 µA
Min.
Reverse Voltage
VR @ 10 µA Min.
GaP 2.2
2.6
5
-
AS AlGaAs
1.9
2.6
5
-
AlInGaP
1.9
2.4
5
-
GaN Blue
3.9
4.3
-
5
InGaN
3.4
4.05
-
5
1.0
RELATIVE INTENSITY
0.9
0.8
BLUE
YELLOW GREEN
CYAN
AMBER
GREEN
0.7
ORANGE
0.6
0.5
0.4
RED ORANGE
0.3
RED
0.2
0.1
0
380
430
480
530
580
630
680
730
780
WAVELENGTH – nm
RELATIVE INTENSITY
1.0
GaP
EMERALD
GREEN
0.8
GaP HSMx-A2xx fig 1a
YELLOW
GREEN
0.6
GaP YELLOW
GaP ORANGE
GaN BLUE
0.4
GaP RED
0.2
0
380
430
480
530
580
630
680
730
780
WAVELENGTH – nm
Figure 1. Relative intensity vs. wavelength.
HSMx-A2xx fig 1b
1.8
30
25
GaP
20
15
AlGaAs
InGaN
AS AlInGaP
10
GaN
BLUE
5
0
0
1
2
3
4
FORWARD VOLTAGE – V
Figure 2. Forward current vs. forward voltage.
5
35
1.6
Gap
AlInGaP
AlGaAs
1.4
30
InGaN
1.2
GaN
1.0
0.8
0.6
0.4
AlGaAs
GaP
25
AS AlInGaP
20
InGaN/GaN
15
10
5
0.2
0
CURRENT – mA
RELATIVE LUMINOUS INTENSITY
(NORMALIZED AT 20 mA)
FORWARD CURRENT – mA
35
0
5
10
15
20
25
30
DC FORWARD CURRENT – mA
Figure 3. Relative intensity vs. forward voltage.
HSMx-A2xx fig 2
HSMx-A2xx fig 3
35
0
0
20
40
60
80
100
120
TEMPERATURE – °C
Figure 4a. Maximum forward current vs. ambient
temperature. Derated based on TJMAX = 110°C,
HSMx-A2xx
fig 4a
RθJA = 500°C/W (1 chip
on).
DOMINANT WAVELENGTH – nm
MAXIMUM FORWARD CURRENT – mA
540
35
30
AlGaAs
GaP
25
AS AlInGaP
20
15
InGaN/GaN
10
5
0
0
20
40
60
80
100
530
510
500
490
480
InGaN BLUE
470
460
120
InGaN GREEN
520
0
5
AMBIENT TEMPERATURE – °C
10
15
20
25
Figure 4b. Maximum forward current vs. ambient
temperature. Derated based on TJMAX = 110°C,
RθJA = 700°C/W (3 chip
on).
HSMx-A2xx
fig 4b
NORMALIZED INTENSITY
0.8
0.6
0.4
0.2
0
10 20 30 40 50 60 70 80 90
ANGULAR DISPLACEMENT – DEGREES
Figure 6. Radiation pattern.
HSMx-A2xx fig 6
0.9
HSMF-A341
0.8
HSMF-A342
HSMF-A331
Y-COORDINATE
0.7
BLACK BODY CURVE
0.6
HSMF-A332
HSMF-A301
CIE CHART 1931
0.5
0.4
0.3
0.2
0.1
0
0
0.1
0.2 0.3
0.4
0.5
0.6 0.7
X-COORDINATE
Figure 7. Chromaticity diagram for Tricolor.
35
Figure 5. Dominant wavelength vs. forward current
– InGaN.
1.0
0
-90 -80 -70 -60 -50 -40 -30 -20 -10
30
CURRENT – mA
0.8 0.9
10 to 20 SEC.
217 °C
240°C MAX.
3°C/SEC. MAX.
100-150°C
TEMPERATURE
TEMPERATURE
20 SEC. MAX.
183°C
–6°C/SEC.
MAX.
3°C/SEC.
MAX.
120 SEC. MAX.
255 °C
+5 °C
-0 °C
3 °C/SEC. MAX.
125 °C ± 25 °C
6 °C/SEC. MAX.
MAX. 120 SEC.
60 to 150 SEC.
60-150 SEC.
TIME
TIME
* THE TIME FROM 25 °C TO PEAK TEMPERATURE = 6 MINUTES MAX.
Figure 8a. Recommended SnPb reflow soldering profile.
Figure 8b. Recommended Pb-free reflow soldering profile.
Note: For detail information on reflow soldering of Avago surface mount LEDs, do refer to Avago Application Note AN 1060 Surface Mounting SMT
LED Indicator Components.
2.60
3.30
3.30
0.40
1.10
0.50
4.50
7.50
1.50
SOLDER RESIST
Figure 9. Recommended soldering pad pattern.
HSMx-A2xx fig 9
TRAILER
COMPONENT
LEADER
200 mm MIN. FOR ∅180 REEL.
200 mm MIN. FOR ∅330 REEL.
480 mm MIN. FOR ∅180 REEL.
960 mm MIN. FOR ∅330 REEL.
C
A
USER FEED DIRECTION
Figure 10. Tape leader and trailer dimension.
HSMx-A2xx fig 8
4 ± 0.1
4 ± 0.1
2 ± 0.05
2.29 ± 0.1
1.75 ± 0.1
+0.1
∅1.5 –0
C
3.5 ± 0.05
+0.3
8 –0.1
3.81 ± 0.1
A
+0.1
∅1 –0
3.05 ± 0.1
8°
0.229 ± 0.01
Figure 11. Tape leader and trailer dimension.
HSMx-A2xx fig 9
2 +0.5
–0
Ø 20.5 ± 0.3
62.5
180
+0
–2.5
Ø 13 ± 0.2
8.4
LABEL AREA (111 mm x 57 mm)
WITH DEPRESSION (0.25 mm)
Figure 12. Reel dimension.
+1.50
(MEASURED AT OUTER EDGE)
–0.00
14.4 (MAX. MEASURED AT HUB)
7.9 (MIN.)
10.9 (MAX.)
USER FEED DIRECTION
CATHODE SIDE
PRINTED LABEL
Figure 13. Reeling Orientation.
HSMx-A2xx fig 11
Moisture Sensitivity
This product is qualified as Moisture Sensitive Level 2a per Jedec J-STD-020. Precautions when handling this moisture
sensitive product is important to ensure the reliability of the product. Do refer to Avago Application Note AN5305
Handling of Moisture Sensitive Surface Mount Devices for details.
A. Storage before use
- Unopen moisture barrier bag (MBB) can be stored at <40°C/90%RH for 12 months. If the actual shelf life has
exceeded 12 months and the HIC indicates that baking is not required, then it is safe to reflow the LEDs per the
original MSL rating.
- It is not recommended to open the MBB prior to assembly (e.g. for IQC).
B. Control after opening the MBB
- The humidity indicator card (HIC) shall be read immediately upon opening of MBB.
- The LEDs must be kept at <30°C / 60%RH at all time and all high temperature related process including soldering,
curing or rework need to be completed within 672 hours.
C. Control for unfinished reel
- For any unuse LEDs, they need to be stored in sealed MBB with desiccant or desiccator at <5%RH.
D. Control of assembled boards
- If the PCB soldered with the LEDs is to be subjected to other high temperature processes, the PCB need to be
stored in sealed MBB with desiccant or desiccator at <5%RH to ensure no LEDs have exceeded their floor life of
672 hours.
E. Baking is required if:
- “10%” or “15%” HIC indicator turns pink.
- The LEDs are exposed to condition of >30°C / 60% RH at any time.
- The LEDs floor life exceeded 672 hours.
Recommended baking condition: 60±5°C for 20 hours.
10
Iv Bin Select (X5X6)
Individual reel will contain parts
from 1 half bin only.
X5
Min. Iv Bin Selection
For
HSMF-A201-xxxxx
HSMF-A204-xxxxx
HSMF-A206-xxxxx
For
HSMF-A202-xxxxx
Minimum Intensity Bin
Color 1
(Red)
Color 2
(Yellow)
A
K2
B
For
HSMF-A203-xxxxx
HSMF-A205-xxxxx
Minimum Intensity Bin
K1
Color 1
(Red/Orange)
Color 2
(Green)
K2
K2
A
K2
J1
Minimum Intensity Bin
C
K2
L1
B
K2
J2
Color 1
(Red/Yellow/
Orange)
D
K2
L2
C
K2
K1
Color 2
(Green)
E
K2
M1
D
K2
K2
F
L1
K1
E
K2
L1
A
K2
L1
G
L1
K2
F
L1
J1
B
K2
L2
H
L1
L1
G
L1
J2
C
K2
M1
J
L1
L2
H
L1
K1
D
K2
M2
K
L1
M1
J
L1
K2
E
K2
N1
L
L2
K1
K
L1
L1
F
L1
L1
M
L2
K2
L
L2
J1
G
L1
L2
N
L2
L1
M
L2
J2
H
L1
M1
P
L2
L2
N
L2
K1
J
L1
M2
Q
L2
M1
P
L2
K2
K
L1
N1
R
M1
K1
Q
L2
L1
L
L2
L1
S
M1
K2
R
M1
J1
M
L2
L2
T
M1
L1
S
M1
J2
N
L2
M1
U
M1
L2
T
M1
K1
P
L2
M2
V
M1
M1
U
M1
K2
Q
L2
N1
W
M2
K1
V
M1
L1
R
M1
L1
X
M2
K2
W
M2
J1
S
M1
L2
Y
M2
L1
X
M2
J2
T
M1
M1
Z
M2
L2
Y
M2
K1
U
M1
M2
1
M2
M1
Z
M2
K2
V
M1
N1
1
M2
L1
W
M2
L1
X
M2
L2
Y
M2
M1
Z
M2
M2
1
M2
N1
For
HSMF-A211-xxxxx
For
HSMF-A212-xxxxx
For
HSMF-A222-xxxxx
Minimum Intensity Bin
Minimum Intensity Bin
Minimum Intensity Bin
Color 1
(Red)
Color 2
(Green)
Color 1
(Red)
Color 2
(Yellow)
Color 1
(Red)
Color 2
(Amber)
A
L2
L1
A
L2
K1
A
P1
P1
B
L2
L2
B
L2
K2
B
P1
P2
C
L2
M1
C
L2
L1
C
P1
Q1
D
L2
M2
D
L2
L2
D
P1
Q2
E
L2
N1
E
L2
M1
E
P1
R1
F
M1
L1
F
M1
K1
F
P2
P1
G
M1
L2
G
M1
K2
G
P2
P2
H
M1
M1
H
M1
L1
H
P2
Q1
J
M1
M2
J
M1
L2
J
P2
Q2
K
M1
N1
K
M1
M1
K
P2
R1
L
M2
L1
L
M2
K1
L
Q1
P1
M
M2
L2
M
M2
K2
M
Q1
P2
N
M2
M1
N
M2
L1
N
Q1
Q1
P
M2
M2
P
M2
L2
P
Q1
Q2
Q
M2
N1
Q
M2
M1
Q
Q1
R1
R
N1
L1
R
N1
K1
R
Q2
P1
S
N1
L2
S
N1
K2
S
Q2
P2
T
N1
M1
T
N1
L1
T
Q2
Q1
U
N1
M2
U
N1
L2
U
Q2
Q2
V
N1
N1
V
N1
M1
V
Q2
R1
W
N2
L1
W
N2
K1
W
R1
P1
X
N2
L2
X
N2
K2
X
R1
P2
Y
N2
M1
Y
N2
L1
Y
R1
Q1
Z
N2
M2
Z
N2
L2
Z
R1
Q2
1
N2
N1
1
N2
M1
1
R1
R1
2
R2
P1
3
R2
P2
4
R2
Q1
5
R2
Q2
6
R2
R1
Note: 0 represents no maximum bin limit.
For
HSMF-A227-xxxxx
HSMF-A228-xxxxx
For
HSMF-A331-xxxxx
HSMF-A332-xxxxx
For
HSMF-A341-xxxxx
HSMF-A342-xxxxx
Minimum Intensity Bin
Minimum Intensity Bin
Minimum Intensity Bin
Color 1
(Red/Amber)
Color 2
(Blue)
A
P1
J2
Color 1
(Red/Red
Orange)
Color 2
(Green)
Color 3
(Blue)
Color 1
(Red/Red
Orange)
Color 2
(Green)
Color 3
(Blue)
B
P1
K1
A
P1
R1
K2
A
P1
R1
N1
C
P1
K2
B
P1
R1
L1
B
P1
R1
N2
D
P1
L1
C
P1
R1
L2
C
P1
R1
P1
E
P1
L2
D
P1
R2
K2
D
P1
R2
N1
F
P2
J2
E
P1
R2
L1
E
P1
R2
N2
G
P2
K1
F
P1
R2
L2
F
P1
R2
P1
H
P2
K2
G
P1
S1
K2
G
P1
S1
N1
J
P2
L1
H
P1
S1
L1
H
P1
S1
N2
K
P2
L2
J
P1
S1
L2
J
P1
S1
P1
L
Q1
J2
K
P2
R1
K2
K
P2
R1
N1
M
Q1
K1
L
P2
R1
L1
L
P2
R1
N2
N
Q1
K2
M
P2
R1
L2
M
P2
R1
P1
P
Q1
L1
N
P2
R2
K2
N
P2
R2
N1
Q
Q1
L2
P
P2
R2
L1
P
P2
R2
N2
R
Q2
J2
Q
P2
R2
L2
Q
P2
R2
P1
S
Q2
K1
R
P2
S1
K2
R
P2
S1
N1
T
Q2
K2
S
P2
S1
L1
S
P2
S1
N2
U
Q2
L1
T
P2
S1
L2
T
P2
S1
P1
V
Q2
L2
U
Q1
R1
K2
U
Q1
R1
N1
W
R1
J2
V
Q1
R1
L1
V
Q1
R1
N2
X
R1
K1
W
Q1
R1
L2
W
Q1
R1
P1
Y
R1
K2
X
Q1
R2
K2
X
Q1
R2
N1
Z
R1
L1
Y
Q1
R2
L1
Y
Q1
R2
N2
1
R1
L2
Z
Q1
R2
L2
Z
Q1
R2
P1
2
R2
J2
1
Q1
S1
K2
1
Q1
S1
N1
3
R2
K1
2
Q1
S1
L1
2
Q1
S1
N2
4
R2
K2
3
Q1
S1
L2
3
Q1
S1
P1
5
R2
L1
4
Q2
R1
K2
4
Q2
R1
N1
6
R2
L2
5
Q2
R1
L1
5
Q2
R1
N2
6
Q2
R1
L2
6
Q2
R1
P1
7
Q2
R2
K2
7
Q2
R2
N1
8
Q2
R2
L1
8
Q2
R2
N2
9
Q2
R2
L2
9
Q2
R2
P1
X6 Number of Half bins from X5
For HSMF-A3xx-xxxxx
Intensity Bin Limits
For
HSMF-A2xx-xxxxx
Color 1
(Red/Red
Orange)
Color 2
(Green)
Color 3
(Blue)
Color 1
Color 2
0
0
0
0
0
0
0
A
0
5
A
5
5
5
B
0
4
B
5
5
4
C
0
3
C
5
5
3
D
0
2
D
5
4
5
E
5
0
E
5
4
4
F
5
5
F
5
4
3
G
5
4
G
5
3
5
H
5
3
H
5
3
4
J
5
2
J
5
3
3
K
4
0
K
4
5
5
L
4
5
L
4
5
4
M
4
4
M
4
5
3
N
4
3
N
4
4
5
P
4
2
P
4
4
4
Q
3
0
Q
4
4
3
R
3
5
R
4
3
5
S
3
4
S
4
3
4
T
3
3
T
4
3
3
U
3
2
U
3
5
5
V
2
0
V
3
5
4
W
2
5
W
3
5
3
X
2
4
X
3
4
5
Y
2
3
Y
3
4
4
Z
2
2
Z
3
4
3
1
3
3
5
2
3
3
4
3
3
3
3
Note: 0 represents no maximum bin limit.
Note: 0 represents no maximum bin limit.
Bin ID
Min. (mcd)
Max. (mcd)
J1
4.50
5.60
J2
5.60
7.20
K1
7.20
9.00
K2
9.00
11.20
L1
11.20
14.00
L2
14.00
18.00
M1
18.00
22.40
M2
22.40
28.50
N1
28.50
35.50
N2
35.50
45.00
P1
45.00
56.00
P2
56.00
71.50
Q1
71.50
90.00
Q2
90.00
112.50
R1
112.50
140.00
R2
140.00
180.00
S1
180.00
224.00
S2
224.00
285.00
T1
285.00
355.00
T2
355.00
450.00
U1
450.00
560.00
U2
560.00
715.00
V1
715.00
900.00
V2
900.00
1125.00
Tolerance of each bin limit = ±12%.
Color Bin Select (X7)
Individual reel will contain parts
from 1 full bin only.
X7
Color Bin Combinations
For
HSMF-A202-xxxxx
HSMF-A203-xxxxx
HSMF-A212-xxxxx
HSMF-A222-xxxxx
HSMF-A227-xxxxx
For
HSMF-A204-xxxxx
HSMF-A206-xxxxx
For
HSMF-A205-xxxxx
HSMF-A228-xxxxx
Color 1
(Yellow/Amber/
Orange)
Color 2
(Emerald
Green/Blue)
0
0
0
A
ABC
ABC
B
BCD
ABC
Color 1
(Red)
Color 2
(Emerald Green/
Yellow/Blue)
C
CDE
ABC
D
ABC
BCD
E
BCD
BCD
0
0
0
F
CDE
BCD
A
0
ABC
G
ABC
CDE
B
0
ABCD
H
BCD
CDE
C
0
ABCDE
J
CDE
CDE
D
0
BCD
K
DEF
ABC
E
0
BCDE
L
DEF
BCD
F
0
BCDEF
M
DEF
CDE
G
0
CDE
N
AB
AB
H
0
DEF
P
BC
AB
J
0
CDEF
Q
CD
AB
K
0
AB
R
DE
AB
L
0
BC
S
AB
BC
M
0
CD
T
BC
BC
N
0
DE
U
CD
BC
P
0
EF
V
DE
BC
Note: 0 represents full distribution.
W
AB
CD
X
BC
CD
Y
CD
CD
Z
DE
CD
1
AB
DE
2
BC
DE
3
CD
DE
4
DE
DE
5
EF
AB
6
EF
BC
7
EF
CD
For
HSMF-A201-xxxxx
HSMF-A211-xxxxx
Color 1
(Red)
Color 2
(Yellow Green)
0
0
0
A
0
EFG
B
0
FGH
C
0
EF
D
0
FG
E
0
GH
Note: 0 represents full distribution.
Note: 0 represents full distribution.
Color 1
(Yellow/
Amber/
Orange)
Color 2
(Yellow Green)
0
0
0
A
ABC
EFG
B
BCD
EFG
C
CDE
EFG
D
DEF
EFG
E
ABC
FGH
F
BCD
FGH
G
CDE
FGH
H
DEF
FGH
J
AB
EF
K
BC
EF
L
CD
EF
M
DE
EF
N
EF
EF
P
AB
FG
Q
BC
FG
R
CD
FG
S
DE
FG
T
EF
FG
U
AB
GH
V
BC
GH
W
CD
GH
X
DE
GH
Y
EF
GH
Note: 0 represents full distribution.
For
HSMF-A3xx-xxxxx
Color Bin Limits
Amber/
Yellow
Min. (nm)
Max. (nm)
A
582.0
584.5
B
584.5
587.0
C
587.0
589.5
D
589.5
592.0
Max. (nm)
E
592.0
594.5
515.0
520.0
F
594.5
597.0
B
520.0
525.0
BCD
C
525.0
530.0
Orange
Min. (nm)
Max. (nm)
ABC
AB
D
530.0
535.0
A
597.0
600.0
0
ABC
BC
B
600.0
603.0
L
0
ABC
CD
0
Max. (nm)
606.0
BCD
Min. (nm)
603.0
0
Emerald
Green
C
M
D
606.0
609.0
N
0
BCD
ABC
A
552.5
555.5
E
609.0
612.0
P
0
BCD
BCD
B
555.5
558.5
Q
0
BCD
AB
C
558.5
561.5
R
0
BCD
BC
D
561.5
564.5
Red Orange
Min. (nm)
Max. (nm)
S
0
BCD
CD
A
611.0
616.0
T
0
AB
ABC
B
616.0
620.0
U
0
AB
V
0
Min. (nm)
Max. (nm)
W
Color 1
Color 2
Color 3
Blue
Min. (nm)
Max. (nm)
0
0
0
0
A
460.0
465.0
A
0
0
ABC
B
465.0
470.0
B
0
0
BCD
C
470.0
475.0
C
0
0
AB
D
475.0
480.0
D
0
0
BC
E
0
0
CD
Green
Min. (nm)
F
0
ABC
0
A
G
0
ABC
ABC
H
0
ABC
J
0
K
BCD
Yellow
Green
Min. (nm)
Max. (nm)
AB
AB
E
564.5
567.5
Red
0
AB
BC
F
567.5
570.5
Full Distribution
X
0
AB
CD
G
570.5
573.5
Tolerance of each bin limit = ±1 nm.
Y
0
BC
ABC
H
573.5
576.5
Z
0
BC
BCD
1
0
BC
AB
2
0
BC
BC
3
0
BC
CD
4
0
CD
ABC
5
0
CD
BCD
6
0
CD
AB
7
0
CD
BC
8
0
CD
CD
Packaging Option (X8X9)
X8X9
J1
20 mA test current, Top Mount, 7 inch Reel
Note: 0 represents full distribution.
For product information and a complete list of distributors, please go to our website:
www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries.
Data subject to change. Copyright © 2007 Avago Technologies Limited. All rights reserved. Obsoletes 5989-1210EN
AV02-0501EN - June 13, 2007