Surface Mount LED Indicator Agilent HSMx-A2xx-xxxxx Bi-Color, HSMx-A3xx-xxxxx Tri Color PLCC-4 SMT LED Data Sheet Description This family of SMT LEDs is packaged in the industry standard PLCC-4 package. These SMT LEDs have high reliability performance and are designed to work under a wide range of environmental conditions. This high reliability feature makes them ideally suited to be used under harsh interior automotive as well as interior signs application conditions. To facilitate easy pick and place assembly, the LEDs are packed in EIA-compliant tape and reel. Every reel will be shipped in single intensity and color bin, except red color to provide close uniformity. These LEDs are compatible with IR and TTW solder reflow process. This super wide viewing angle at 120° together with the built in reflector pushing up the intensity of the light output makes these LED suitable to be used in the interior electronics signs. The flat top emitting surface makes it easy for these LEDs to mate with light pipes. This is suitable for general backlighting in automotive interior, office equipment, industrial equipment, and home appliances. Features • Industry Standard PLCC-4 package (Plastic Leaded Chip Carrier) • High reliability LED package • High brightness using AlInGaP and InGaN dice technologies • Available in full selection of colors • Super wide viewing angle at 120° • Available in 8 mm carrier tape on 7-inch reel • Compatible with IR soldering process Applications • Electronic signs and signals – Interior full color sign – Variable message sign • Interior automotive – Instrument cluster backlighting – Central console backlighting – Cabin backlighting • Office automation, home appliances, industrial equipment – Front panel backlighting – Display backlighting CAUTION: HSMF-Axxx-xxxxx LEDs are Class 2 ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to Agilent Application Note AN-1142 for additional details. Package Dimensions 2.8 ± 0.2 1.9 ± 0.2 2.2 ± 0.2 (2) 0.1 TYP. 0.8 ± 0.1 (3) 3.2 ± 0.2 3.5 ± 0.2 0.8 ± 0.3 (1) (4) 0.5 ± 0.1 CATHODE MARKING 0.7 ± 0.1 NOTE: 1. ALL DIMENSIONS IN mm. Tri Color 1 Cathode (Color 1) Device Selection Guide Bi Color 2 Common Anode Part Number Color 1 Color 2 3 Cathode (Color 3) HSMF-A201- xxxxx GaP Red GaP Yellow Green 4 Cathode (Color 2) HSMF-A202- xxxxx GaP Red GaP Yellow Bi Color HSMF-A203- xxxxx GaP Red GaP Emerald Green 1 Cathode (Color 1) HSMF-A204- xxxxx GaP Orange GaP Yellow Green 2 Anode (Color 1) HSMF-A205- xxxxx GaP Orange GaP Emerald Green 3 Cathode (Color 2) HSMF-A206- xxxxx GaP Yellow GaP Yellow Green 4 Anode (Color 2) HSMF-A211- xxxxx AlGaAs Red GaP Yellow Green HSMF-A212- xxxxx AlGaAs Red GaP Yellow HSMF-A222- xxxxx AS AlInGaP Red AS AlInGaP Amber HSMF-A227- xxxxx AS AlInGaP Red GaN Blue HSMF-A228- xxxxx AS AlInGaP Amber GaN Blue HSMF-A226- xxxxx AS AlInGaP Amber AlInGaP Yellow Green 2 Part Number Color 1 Min. Iv @ 20 mA Typical Iv @ 20 mA Bin ID (mcd) (mcd) Color 2 Min. Iv @ 20 mA Typical Iv @ 20 mA Bin ID (mcd) (mcd) HSMF-A201-A00J1 K2 8.0 16.0 L1 10.0 20.0 HSMF-A202-A00J1 K2 8.0 16.0 K1 6.3 12.0 HSMF-A203-A00J1 K2 8.0 16.0 J1 4.0 8.0 HSMF-A204-A00J1 K2 8.0 16.0 L1 10.0 20.0 HSMF-A205-A00J1 K2 8.0 16.0 J1 4.0 8.0 HSMF-A206-A00J1 K2 8.0 16.0 L1 10.0 20.0 HSMF-A211-A00J1 L2 12.5 25.0 L1 10.0 20.0 HSMF-A212-A00J1 L2 12.5 25.0 K1 6.3 12.0 HSMF-A222-A00J1 P1 40.0 80.0 P1 40.0 80.0 HSMF-A227-A00J1 P1 40.0 80.0 J2 5.0 10.0 HSMF-A228-A00J1 P1 40.0 80.0 J2 5.0 10.0 HSMF-A226-A00J1 P2 49.0 100.0 M2 20.0 60.0 Note: 1. The luminous intensity Iv, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be aligned with this axis. Tri Color Part Number Color 1 Color 2 Color 3 HSMF-A301-xxxxx GaP Red GaP Yellow Green GaN Blue HSMF-A331-xxxxx AS AlInGaP Red InGaN Green GaN Blue HSMF-A332-xxxxx AS AlInGaP Red Orange InGaN Green GaN Blue HSMF-A341-xxxxx AS AllnGaP Red InGaN Green InGaN Blue HSMF-A342-xxxxx AS AllnGaP Red Orange InGaN Green InGaN Blue Part Number Color 1 Min. Iv Typical Iv @ 20 mA @ 20 mA Bin ID (mcd) (mcd) Color 2 Min. Iv Typical Iv @ 20 mA @ 20 mA Bin ID (mcd) (mcd) Color 3 Min. Iv Typical Iv @ 20 mA @ 20 mA Bin ID (mcd) (mcd) HSMF-A301-A00J1 K2 8.0 13.0 L2 12.5 20.0 K2 8.0 10.0 HSMF-A331-A00J1 P1 40.0 80.0 R1 99.0 160.0 K2 8.0 10.0 HSMF-A332-A00J1 P1 40.0 80.0 R1 99.0 160.0 K2 8.0 10.0 HSMF-A341-A00J1 P1 40.0 80.0 R1 99.0 160.0 N1 25.0 40.0 HSMF-A342-A00J1 P1 40.0 80.0 R1 99.0 160.0 N1 25.0 40.0 Note: 1. The luminous intensity Iv, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be aligned with this axis. 3 Part Numbering System HSM x1 – A x2 x3x4 – x5 x6 x7 x8x9 Packaging Option Color Bin Selection Intensity Bin Select Device Specification Configuration Package Type LED Chip Color Absolute Maximum Ratings (TA = 25°C) Parameters GaP AlGaAs AS AlInGaP Red, Amber GaN/InGaN Yellow Green DC Forward Current[1] 30 mA 30 mA 30 mA[3,4] 20 mA[4] Peak Forward Current[2] 100 mA 100 mA 100 mA 100 mA 100 mA Power Dissipation 78 mW 78 mW 72 mW 48 mW 120 mW Reverse Voltage 5V Junction Temperature 110°C Operating Temperature –55°C to +100°C Storage Temperature –55°C to +100°C Notes: 1. Derate linearly as shown in figure 4. 2. Duty factor = 10%, Frequency = 1kHz. 3. Drive Current between 10 mA and 30 mA are recommended for best long term performance. 4. Operation at current below 5 mA is not recommended. 4 30 mA Optical Characteristics (TA = 25°C) Color Peak Wavelength λPEAK (nm) Typ. Dominant Wavelength λD (nm)[1] Typ. Viewing Angle 2θ1/2 (Degrees)[2] Typ. Luminous Efficacy ηv (lm/W)[3] Typ. Luminous Intensity/ Total Flux Iv (mcd) /Φv (mlm) Typ. GaP Red 635 626 120 120 0.45 AlGaAs Red 645 637 120 63 0.45 AS AlInGaP Red 635 626 120 150 0.45 AS AlInGaP Red Orange 621 615 120 240 0.45 GaP Orange 600 602 120 380 0.45 AS AlInGaP Amber 592 590 120 480 0.45 GaP Yellow 583 585 120 580 0.45 AS AlInGaP Amber 592 590 120 480 0.45 GaP Yellow Green 565 569 120 590 0.45 GaP Emerald Green 558 560 120 650 0.45 InGaN Green 523 525 120 500 0.45 InGaN Blue 468 470 120 75 0.45 GaN Blue 428 462 120 65 0.45 AlInGaP Yellow Green 575 571 120 620 0.45 Notes: 1. The dominant wavelength, λD , is derived from the CIE Chromaticity Diagram and represents the color of the device. 2. θ 1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity. 3. Radiant intensity, I e in watts/steradian, may be calculated from the equation I e = Iv/ηv , where Iv is the luminous intensity in candelas and ηv is the luminous efficacy in lumens/watt. Electrical Characteristics (TA = 25°C) 5 Dice Technology Forward Voltage VF (Volts) @ IF = 20mA Typ. Max. Reverse Voltage VR @ 100 µA Min. Reverse Voltage VR @ 10 µA Min. GaP 2.2 2.6 5 - AS AlGaAs 1.9 2.6 5 - AS AlInGaP 1.9 2.4 5 - GaN Blue 3.9 4.3 - 5 InGaN 3.4 4.05 - 5 1.0 RELATIVE INTENSITY 0.9 BLUE YELLOW GREEN CYAN AMBER 0.8 GREEN 0.7 ORANGE 0.6 0.5 0.4 RED ORANGE 0.3 RED 0.2 0.1 0 380 430 530 480 580 630 680 730 780 WAVELENGTH – nm RELATIVE INTENSITY 1.0 GaP EMERALD GREEN 0.8 GaP YELLOW GREEN 0.6 GaP YELLOW GaP ORANGE GaN BLUE 0.4 GaP RED 0.2 0 430 380 530 480 580 630 680 730 780 WAVELENGTH – nm Figure 1. Relative intensity vs. wavelength. GaP 20 AlGaAs 15 InGaN AS AlInGaP 10 GaN BLUE 5 1.6 1 2 3 4 Figure 2. Forward current vs. forward voltage. 5 30 AlInGaP AlGaAs 1.4 InGaN 1.2 GaN 1.0 0.8 0.6 AlGaAs GaP 25 AS AlInGaP 20 InGaN/GaN 15 10 0.4 5 0.2 0 0 Gap CURRENT – mA 25 FORWARD VOLTAGE – V 6 RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA) FORWARD CURRENT – mA 30 0 35 1.8 35 0 5 10 15 20 25 30 DC FORWARD CURRENT – mA Figure 3. Relative intensity vs. forward voltage. 35 0 0 20 40 60 80 100 120 TEMPERATURE – °C Figure 4a. Maximum forward current vs. ambient temperature. Derated based on TJMAX = 110°C, Rθ JA = 500°/W (1 chip on). DOMINANT WAVELENGTH – nm MAXIMUM FORWARD CURRENT – mA 540 35 30 AlGaAs GaP 25 AS AlInGaP 20 15 InGaN/GaN 10 5 0 0 20 40 60 80 100 530 510 500 490 480 InGaN BLUE 470 460 120 InGaN GREEN 520 0 5 AMBIENT TEMPERATURE – °C 10 15 20 Figure 4b. Maximum forward current vs. ambient temperature. Derated based on TJ MAX = 110°C, RθJA = 700°/W (3 chip on). NORMALIZED INTENSITY 0.8 0.6 0.4 0.2 0 10 20 30 40 50 60 70 80 90 ANGULAR DISPLACEMENT – DEGREES Figure 6. Radiation pattern. 0.9 0.8 0.7 Y-COORDINATE BLACK BODY CURVE HSMF-A341 HSMF-A342 HSMF-A331 HSMF-A332 HSMF-A301 CIE CHART 1931 0.6 0.5 0.4 0.3 0.2 0.1 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 X-COORDINATE Figure 7. Chromaticity diagram for Tricolor. 7 30 35 Figure 5. Dominant wavelength vs. forward current – InGaN. 1.0 0 -90 -80 -70 -60 -50 -40 -30 -20 -10 25 CURRENT – mA 0.8 0.9 2.60 3.30 3.30 0.40 1.10 0.50 TEMPERATURE 20 SEC. MAX. 240°C MAX. 3°C/SEC. MAX. 100-150°C 4.50 7.50 183°C 1.50 –6°C/SEC. MAX. 3°C/SEC. MAX. 120 SEC. MAX. 60-150 SEC. TIME SOLDER RESIST Figure 9. Recommended soldering pad pattern. Figure 8. Recommended reflow soldering profile. TRAILER COMPONENT LEADER 480 mm MIN. FOR ∅180 REEL. 960 mm MIN. FOR ∅330 REEL. 200 mm MIN. FOR ∅180 REEL. 200 mm MIN. FOR ∅330 REEL. C A USER FEED DIRECTION Figure 10. Tape leader and trailer dimension. 4 ± 0.1 4 ± 0.1 2 ± 0.05 2.29 ± 0.1 1.75 ± 0.1 +0.1 ∅1.5 –0 C 3.5 ± 0.05 +0.3 8 –0.1 3.81 ± 0.1 A 3.05 ± 0.1 +0.1 ∅1 –0 8° 0.229 ± 0.01 Figure 11. Tape leader and trailer dimension. 8 2 +0.5 –0 Ø 20.5 ± 0.3 62.5 180 +0 –2.5 Ø 13 ± 0.2 8.4 +1.50 (MEASURED AT OUTER EDGE) –0.00 14.4 (MAX. MEASURED AT HUB) LABEL AREA (111 mm x 57 mm) WITH DEPRESSION (0.25 mm) 7.9 (MIN.) 10.9 (MAX.) Figure 12. Reel dimension. USER FEED DIRECTION CATHODE SIDE PRINTED LABEL Figure 13. Reeling Orientation. 9 Storage Condition: 5 to 30°C @ 60% RH max. Baking is required under the condition: a) the humidity indicator card becoming pink color b) the pack has been opened for more than 4 weeks Baking recommended condition: 60 ± 5°C for 20 hours. This product is qualified as Moisture Sensitive JEDEC Level 2A. Iv Bin Select (X5X6) Individual reel will contain parts from 1 half bin only. X5 For HSMF-A202-xxxxx Minimum Intensity Bin Min. Iv Bin Selection For HSMF-A201-xxxxx HSMF-A204-xxxxx HSMF-A206-xxxxx Minimum Intensity Bin Color 1 (Red) Color 2 (Yellow) A K2 K1 B K2 K2 C K2 D For HSMF-A203-xxxxx HSMF-A205-xxxxx Minimum Intensity Bin Color 1 (Red/Orange) Color 2 (Green) A K2 J1 L1 B K2 J2 K2 L2 C K2 K1 Color 1 (Red/Yellow/ Orange) Color 2 (Green) E K2 M1 D K2 K2 F L1 K1 E K2 L1 A K2 L1 G L1 K2 F L1 J1 B K2 L2 H L1 L1 G L1 J2 C K2 M1 J L1 L2 H L1 K1 D K2 M2 K L1 M1 J L1 K2 E K2 N1 L L2 K1 K L1 L1 F L1 L1 M L2 K2 L L2 J1 G L1 L2 N L2 L1 M L2 J2 H L1 M1 P L2 L2 N L2 K1 J L1 M2 Q L2 M1 P L2 K2 K L1 N1 R M1 K1 Q L2 L1 L L2 L1 S M1 K2 R M1 J1 M L2 L2 T M1 L1 S M1 J2 N L2 M1 U M1 L2 T M1 K1 P L2 M2 V M1 M1 U M1 K2 Q L2 N1 W M2 K1 V M1 L1 R M1 L1 X M2 K2 W M2 J1 S M1 L2 Y M2 L1 X M2 J2 T M1 M1 Z M2 L2 Y M2 K1 U M1 M2 1 M2 M1 Z M2 K2 V M1 N1 1 M2 L1 W M2 L1 X M2 L2 Y M2 M1 Z M2 M2 1 M2 N1 10 For HSMF-A211-xxxxx For HSMF-A212-xxxxx For HSMF-A222-xxxxx Minimum Intensity Bin Minimum Intensity Bin Minimum Intensity Bin Color 1 (Red) Color 2 (Green) Color 1 (Red) Color 2 (Yellow) Color 1 (Red) Color 2 (Amber) A L2 L1 A L2 K1 A P1 P1 B L2 L2 B L2 K2 B P1 P2 C L2 M1 C L2 L1 C P1 Q1 D L2 M2 D L2 L2 D P1 Q2 E L2 N1 E L2 M1 E P1 R1 F M1 L1 F M1 K1 F P2 P1 G M1 L2 G M1 K2 G P2 P2 H M1 M1 H M1 L1 H P2 Q1 J M1 M2 J M1 L2 J P2 Q2 K M1 N1 K M1 M1 K P2 R1 L M2 L1 L M2 K1 L Q1 P1 M M2 L2 M M2 K2 M Q1 P2 N M2 M1 N M2 L1 N Q1 Q1 P M2 M2 P M2 L2 P Q1 Q2 Q M2 N1 Q M2 M1 Q Q1 R1 R N1 L1 R N1 K1 R Q2 P1 S N1 L2 S N1 K2 S Q2 P2 T N1 M1 T N1 L1 T Q2 Q1 U N1 M2 U N1 L2 U Q2 Q2 V N1 N1 V N1 M1 V Q2 R1 W N2 L1 W N2 K1 W R1 P1 X N2 L2 X N2 K2 X R1 P2 Y N2 M1 Y N2 L1 Y R1 Q1 Z N2 M2 Z N2 L2 Z R1 Q2 1 N2 N1 1 N2 M1 1 R1 R1 2 R2 P1 3 R2 P2 4 R2 Q1 5 R2 Q2 6 R2 R1 Note: 0 represents no maximum bin limit. 11 For HSMF-A227-xxxxx HSMF-A228-xxxxx For HSMF-A331-xxxxx HSMF-A332-xxxxx For HSMF-A341-xxxxx HSMF-A342-xxxxx Minimum Intensity Bin Minimum Intensity Bin Minimum Intensity Bin Color 1 (Red/Amber) Color 2 (Blue) A P1 J2 Color 1 (Red/Red Orange) Color 2 (Green) Color 3 (Blue) Color 1 (Red/Red Orange) Color 2 (Green) Color 3 (Blue) B P1 K1 A P1 R1 K2 A P1 R1 N1 C P1 K2 B P1 R1 L1 B P1 R1 N2 D P1 L1 C P1 R1 L2 C P1 R1 P1 E P1 L2 D P1 R2 K2 D P1 R2 N1 F P2 J2 E P1 R2 L1 E P1 R2 N2 G P2 K1 F P1 R2 L2 F P1 R2 P1 H P2 K2 G P1 S1 K2 G P1 S1 N1 J P2 L1 H P1 S1 L1 H P1 S1 N2 K P2 L2 J P1 S1 L2 J P1 S1 P1 L Q1 J2 K P2 R1 K2 K P2 R1 N1 M Q1 K1 L P2 R1 L1 L P2 R1 N2 N Q1 K2 M P2 R1 L2 M P2 R1 P1 P Q1 L1 N P2 R2 K2 N P2 R2 N1 Q Q1 L2 P P2 R2 L1 P P2 R2 N2 R Q2 J2 Q P2 R2 L2 Q P2 R2 P1 S Q2 K1 R P2 S1 K2 R P2 S1 N1 T Q2 K2 S P2 S1 L1 S P2 S1 N2 U Q2 L1 T P2 S1 L2 T P2 S1 P1 V Q2 L2 U Q1 R1 K2 U Q1 R1 N1 W R1 J2 V Q1 R1 L1 V Q1 R1 N2 X R1 K1 W Q1 R1 L2 W Q1 R1 P1 Y R1 K2 X Q1 R2 K2 X Q1 R2 N1 Z R1 L1 Y Q1 R2 L1 Y Q1 R2 N2 1 R1 L2 Z Q1 R2 L2 Z Q1 R2 P1 2 R2 J2 1 Q1 S1 K2 1 Q1 S1 N1 3 R2 K1 2 Q1 S1 L1 2 Q1 S1 N2 4 R2 K2 3 Q1 S1 L2 3 Q1 S1 P1 5 R2 L1 4 Q2 R1 K2 4 Q2 R1 N1 6 R2 L2 5 Q2 R1 L1 5 Q2 R1 N2 6 Q2 R1 L2 6 Q2 R1 P1 7 Q2 R2 K2 7 Q2 R2 N1 8 Q2 R2 L1 8 Q2 R2 N2 9 Q2 R2 L2 9 Q2 R2 P1 12 X6 Number of Half bins from X5 For HSMF-A2xx-xxxxx Color 1 Color 2 0 0 0 A 0 5 B 0 4 C 0 3 D 0 2 E 5 0 F 5 5 G 5 4 H 5 3 J 5 2 K 4 0 L 4 5 M 4 4 N 4 3 P 4 2 Q 3 0 R 3 5 S 3 4 T 3 3 U 3 2 V 2 0 W 2 5 X 2 4 Y 2 3 Z 2 2 Note: 0 represents no maximum bin limit. Intensity Bin Limits For HSMF-A3xx-xxxxx Color 1 (Red/Red Orange) Color 2 (Green) Color 3 (Blue) 0 0 0 0 A 5 5 5 B 5 5 4 C 5 5 3 D 5 4 5 E 5 4 4 F 5 4 3 G 5 3 5 H 5 3 4 J 5 3 3 K 4 5 5 L 4 5 4 M 4 5 3 N 4 4 5 P 4 4 4 Q 4 4 3 R 4 3 5 S 4 3 4 T 4 3 3 U 3 5 5 V 3 5 4 W 3 5 3 X 3 4 5 Y 3 4 4 Z 3 4 3 1 3 3 5 2 3 3 4 3 3 3 3 Note: 0 represents no maximum bin limit. 13 Bin ID Min. (mcd) Max. (mcd) J1 4.50 5.60 J2 5.60 7.20 K1 7.20 9.00 K2 9.00 11.20 L1 11.20 14.00 L2 14.00 18.00 M1 18.00 22.40 M2 22.40 28.50 N1 28.50 35.50 N2 35.50 45.00 P1 45.00 56.00 P2 56.00 71.50 Q1 71.50 90.00 Q2 90.00 112.50 R1 112.50 140.00 R2 140.00 180.00 S1 180.00 224.00 S2 224.00 285.00 T1 285.00 355.00 T2 355.00 450.00 U1 450.00 560.00 U2 560.00 715.00 V1 715.00 900.00 V2 900.00 1125.00 Tolerance of each bin limit = ±12%. Color Bin Select (X7) Individual reel will contain parts from 1 full bin only. X7 For HSMF-A205-xxxxx HSMF-A228-xxxxx Color 1 (Yellow/Amber/ Orange) Color 2 (Emerald Green/Blue) 0 0 0 A ABC ABC B BCD C Color 1 (Yellow/ Amber/ Orange) Color 2 (Yellow Green) 0 0 0 ABC A ABC EFG CDE ABC B BCD EFG D ABC BCD C CDE EFG E BCD BCD D DEF EFG Color Bin Combinations For HSMF-A202-xxxxx HSMF-A203-xxxxx HSMF-A212-xxxxx HSMF-A222-xxxxx HSMF-A227-xxxxx For HSMF-A204-xxxxx HSMF-A206-xxxxx Color 1 (Red) Color 2 (Emerald Green/ Yellow/Blue) 0 0 0 F CDE BCD E ABC FGH A 0 ABC G ABC CDE F BCD FGH B 0 ABCD H BCD CDE G CDE FGH C 0 ABCDE J CDE CDE H DEF FGH D 0 BCD K DEF ABC J AB EF E 0 BCDE L DEF BCD K BC EF F 0 BCDEF M DEF CDE L CD EF G 0 CDE N AB AB M DE EF H 0 DEF P BC AB N EF EF J 0 CDEF Q CD AB P AB FG K 0 AB R DE AB Q BC FG L 0 BC S AB BC R CD FG M 0 CD T BC BC S DE FG N 0 DE U CD BC T EF FG P 0 EF V DE BC U AB GH W AB CD V BC GH X BC CD W CD GH Y CD CD X DE GH Z DE CD Y EF GH For HSMF-A201-xxxxx HSMF-A211-xxxxx 1 AB DE Note: 0 represents full distribution. 2 BC DE Color 1 (Red) Color 2 (Yellow Green) 3 CD DE 4 DE DE 0 0 0 5 EF AB A 0 EFG 6 EF BC B 0 FGH 7 EF CD C 0 EF Note: 0 represents full distribution. D 0 FG E 0 GH Note: 0 represents full distribution. Note: 0 represents full distribution. 14 Color Bin Limits For HSMF-A3xx-xxxxx Color 1 Color 2 Color 3 A 460.0 465.0 Amber/ Yellow 0 0 0 0 B 465.0 470.0 A 582.0 584.5 A 0 0 ABC C 470.0 475.0 B 584.5 587.0 B 0 0 BCD D 475.0 480.0 C 587.0 589.5 C 0 0 AB D 589.5 592.0 D 0 0 BC Green Min. (nm) Max. (nm) E 592.0 594.5 E 0 0 CD A 515.0 520.0 F 594.5 597.0 F 0 ABC 0 B 520.0 525.0 G 0 ABC ABC C 525.0 530.0 Orange Min. (nm) Max. (nm) H 0 ABC BCD D 530.0 535.0 A 597.0 600.0 J 0 ABC AB B 600.0 603.0 K 0 ABC BC 603.0 606.0 0 ABC CD Emerald Green C L Min. (nm) Max. (nm) D 606.0 609.0 M 0 BCD 0 A 552.5 555.5 E 609.0 612.0 N 0 BCD ABC B 555.5 558.5 P 0 BCD BCD C 558.5 561.5 Red Orange Min. (nm) Max. (nm) Q 0 BCD AB D 561.5 564.5 A 611.0 616.0 R 0 BCD BC B 616.0 620.0 S 0 BCD CD T 0 AB ABC Yellow Green Min. (nm) Max. (nm) U 0 AB BCD E 564.5 567.5 Red Min. (nm) Max. (nm) V 0 AB AB F 567.5 570.5 W 0 AB BC G 570.5 573.5 X 0 AB CD H 573.5 576.5 Y 0 BC ABC Z 0 BC BCD 1 0 BC AB 2 0 BC BC X 8X9 3 0 BC CD J1 4 0 CD ABC 5 0 CD BCD 6 0 CD AB 7 0 CD BC 8 0 CD CD Note: 0 represents full distribution. 15 Blue Min. (nm) Max. (nm) Min. (nm) Max. (nm) Full Distribution Tolerance of each bin limit = ±1 nm. Packaging Option (X 8X 9) 20 mA test current, Top Mount, 7 inch Reel www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (408) 654-8675 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6271 2451 India, Australia, New Zealand: (+65) 6271 2394 Japan: (+81 3) 3335-8152(Domestic/International), or 0120-61-1280(Domestic Only) Korea: (+65) 6271 2194 Malaysia, Singapore: (+65) 6271 2054 Taiwan: (+65) 6271 2654 Data subject to change. Copyright © 2003 Agilent Technologies, Inc. Obsoletes 5988-8411EN March 11, 2003 5988-8602EN