Issue: 08 Date: 2008-01-25 Specification AXIS30 Oscillator type : Wideband VCXO with low jitter SMD replacement of Fujitsu M2 (F100) Parameter min. max. Unit Frequency range Standard frequencies 10 90 12.288 / 16.384 / 22.579 / 24.576 / 27.000 / 28.224 MHz MHz Frequency stability Initial tolerance vs. temperature in operating frequency range -20°~+70°C (see Note 2) vs. supply voltage variation vs. load change long term (aging) 1st year Aging following years Frequency adjustment range Electronic Frequency Control (EFC) range *see Note 3 EFC voltage VC EFC slope (∆f / ∆VC) EFC input impedance RF output Signal waveform Load Rise & decay time Symmetry (duty cycle) Start-up time Supply voltage VS typ. -10 -5 -10 -5 ± 500 ± 500 ± 1000 ± 1500 ± 2000 ± 2500 ± 3000 0.25 0.15 Condition ± 80 ppm ppm ppm 10 5 10 5 ppm ppm ppm ppm @ 40°C @ 40°C ppm ppm ppm ppm ppm ppm ppm V V Option 2 = “ ” Option 2 = “500” Option 2 = “1000” Option 2 = “1500”* Option 2 = “2000”* Option 2 = “2500”* Option 2 = “3000”* Option 1 = “50“ (5 V) Option 1 = “33” (3.3 V) ± 1100 ± 1600 ± 2100 ± 2600 ± 3200 4.75 3.15 positive 100 kΩ HCMOS 15 Current consumption (steady state) Operable temperature range Storage temperature range Enclosure (see drawing) Weight Packing ESD Sensitivity 10 40 60 4 4.75 5.0 5.25 3.13 3.3 3.47 40 -45 +90 -50 +95 14.4x9.5x6 max 3 Tape & reel 1500 pF ns % ms V V mA °C °C mm gram Option 1 = “50“ (5 V) Option 1 = “33” (3.3 V) @ +25°C V IEC 60286-3 HBM as in IEC 610004-2 @ VS/2 IEC 61837 CO 27 Notes: 1. Terminology and test conditions are according to IEC standard IEC60679-1, unless otherwise stated 2. Frequency vs. temperature response is a 2nd order parabola with turn-over point around +20°C to +30°C 3. *Pulling Range Option 2 = “1500” or larger only possible with EFC voltage 0.25V ~ 4.75 V Ordering Code: Model (Specification) AXIS30 GmbH & Co. KG Wasemweg 5 D-74821 Mosbach Germany Option 1 Supply 50 Option 2 Pulling Range 500 AXIS30 page 1(2) Frequency [MHz] 28.224 www.axtal.com fon: +49 (6261)939834 fax: +49 (6261) 939836 E-mail: [email protected] Enclosure drawing Pin connections Pin # Symbol 1 VC 2 N.C. 3 GND 4 RF OUT 6 Vs Function Control Voltage (EFC) No connection Ground RF Output (see table) Supply Voltage Environmental conditions: Test IEC 60068 Part ... Visual inspection, dimensions Solderability Resistance to soldering heat Shock* IEC 60679-1 clause ... Test conditions 4.3 Enclosure styles as in IEC 60679-3 or 61837, if applicable Test Ta (235 ± 5)°C Method 1 Test Tb Method 1A, 5s 2-20 2-58 4.6.3 2-27 4.6.8 Vibration, sinusoidal* 2-6 4.6.7 Test Ea, 3 x per axes 100g, 6 ms half-sine pulse Test Fc, 30 min per axes, 10 Hz - 55 Hz 0,75mm; 55 Hz - 2 kHz, 10g Endurance tests - ageing - extended aging 4.7.1 4.7.2 30 days @ 85°C, OCXO @25°C 1000h, 2000h, 8000h @85°C GmbH & Co. KG Wasemweg 5 D-74821 Mosbach Germany AXIS30 page 2(2) www.axtal.com fon: +49 (6261)939834 fax: +49 (6261) 939836 E-mail: [email protected]