ADSL Magnetics Centillium • • TM01385 Designed to comply with the requirements of GR1089, UL1950, EN60950, BABT and CSA950 to provide a supplementary insulation barrier with a working voltage of 250V • Operating and storage temperature range: -40° to +85° C • Meets IEC 695, 2-2 flammability requirements • PWB Process Capability: standard printed wiring board assembly techniques, total-immersion cleaning • Reliability testing: shock, vibration, temperature cycling, temperature - humidity - bias Minimum interwinding breakdown voltage of 1500 Vrms ELECTRICAL SPECIFICATIONS AT 25° C Turns Ratio ±2% Inductance1 µH ±5% Leakage Inductance2 µH max Chip : Line Line Side Line Side Chip Side Line Side Chip : Line 1 : 1.8 450 5 0.75 1.5 80 Part Number 0560-6600-EF DCR Ω max Interwinding Capacitance pF max All measurements are made with pins 2 and 3 connected and pins 6 and 7 connected 1. Inductance measured at 10 kHz, 0.1 Vac 2. Measurements made with 100Ω source and 100Ω load impedance SCHEMATIC 0560-6600-EF 1 10 3 8 Chip Line 2 9 4 7 ©2001 Bel Fuse Inc. Specifications subject to change without notice. 09.01 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 1 ADSL Magnetics Centillium TM01385 MECHANICAL 0560-6600-EF 1 5 10 6 0.550 [13.97] max 0.525 [13.34] max 0.500 [12.70] max 0.020 [0.51] Sq. typ 0.098 [2.50] 0.110 ±0.010 [2.79 ±0.25] 0.394 [10.00] Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.005 [0.13] unless otherwise noted. ©2001 Bel Fuse Inc. Specifications subject to change without notice. 09.01 CORPORATE FAR EAST EUROPE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com page 2