ADSL Magnetics TM02306 • • Designed to comply with the requirements of UL1950 and EN60950 to provide an insulation barrier with a working voltage of 150V • Operating and storage temperature range: -40° to +85° C • Meets IEC 695, 2-2 flammability requirements Minimum interwinding breakdown voltage of 1875 Vrms • PWB Process Capability: standard printed wiring board assembly techniques, total-immersion cleaning • Reliability testing: shock, vibration, temperature cycling, temperature - humidity - bias ELECTRICAL SPECIFICATIONS AT 25° C Turns Ratio ±2% Inductance1 µH ±6.7% Leakage Inductance2 µH max Chip : Line Line Side Line Side Chip Side 1 : 0.95 750 5 1.4 Part Number S560-6600-HB DCR Ω max Longitudinal Balance3 dB max Harmonic Distortion3 dB max Direct Capacitance pF max Line Side 20 kHz 500 kHz 12 Vpp 150 kHz Chip : Line 1.6 45 -85 100 All measurements are made with pins 2 and 3 connected and pins 5 and 7 connected 1. Inductance measured at 10 kHz, 0.1 Vac 2. Measured at 100 kHz, 0.1 Vac 3. Measured with line impedance of 100 Ω and chip impedance of 110.8 Ω SCHEMATIC S560-6600-HB 1 8 3 5 Line IC 2 7 4 6 ©2002 Bel Fuse Inc. Specifications subject to change without notice. 08.02 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 1 ADSL Magnetics TM02306 Suggested PCB Pad Layout MECHANICAL 1 4 S560-6600-HB 0.386 [9.80] 8 0.173 [4.40] 5 0.039 [1.00] 0.018 [0.46] 0.098 [2.50] 0.098 [2.50] 0.395 [10.00] max 0.500 [12.70] max 0.286 [7.26] 0.390 [9.91] max 0.380 [9.65] Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.005 [0.13] unless otherwise noted. Tape and Reel Packaging 24 mm wide by 20 mm pitch; 13 inch OD, 4 inch ID 200 components per reel, maximum Meets ANSI/EIA 481-2 Carrier Tape Standards User Feed Direction Orientation of Component Inside Pocket ©2002 Bel Fuse Inc. Specifications subject to change without notice. 08.02 CORPORATE FAR EAST EUROPE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com page 2