ADSL Magnetics Analog Devices • • TM01363 Designed to comply with the requirements of UL1950 and EN60950 to provide a supplementary insulation barrier with a working voltage of 250V • Operating and storage temperature range: -40° to +85° C • Meets IEC 695, 2-2 flammability requirements Minimum interwinding breakdown voltage of 1500 Vrms • PWB Process Capability: standard printed wiring board assembly techniques, total-immersion cleaning • Reliability testing: shock, vibration, temperature cycling, temperature - humidity - bias ELECTRICAL SPECIFICATIONS AT 25° C Turns Ratio ±2% Inductance1 µH ±7% Leakage Inductance µH max Chip : Line Line Side Chip Side Chip Side 1 : 1.1 100 4 0.80 Part Number S560-6600-DM DCR Ω max Longitudinal Balance2 dB min Insertion Loss2 dB max Frequency Response2 dB max Harmonic Distortion2 dB max Line Side 10 kHz 1 MHz 300 kHz 100 kHz 1.5 MHz 4 Vac 100 kHz 0.90 50 0.5 ±0.5 -80 All measurements are made with pins 2 and 3 connected and pins 6 and 7 connected 1. Inductance measured at 100 kHz, 0.1 Vac 2. Measurements made with 100Ω source impedance SCHEMATIC S560-6600-DM 1 8 3 6 2 7 4 5 Chip Line ©2001 Bel Fuse Inc. Specifications subject to change without notice. 08.01 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 1 ADSL Magnetics Analog Devices TM01363 MECHANICAL 1 2 3 S560-6600-DM 0.615 [15.62] 8 7 6 0.098 [2.50] 0.048 [1.22] 4 0.077 [1.96] 5 Suggested PCB Pad Layout 0.510 [12.95] max 0.475 [12.07] max 0.460 [11.68] max 0.004 [0.10] 0.492 [12.50] 0.024 [0.60] 0.098 [2.50] 8 Edges 0.600 [15.24] max Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.005 [0.13] unless otherwise noted. Tape and Reel Packaging 32 mm wide by 24 mm pitch; 13 inch OD, 4 inch ID 200 components per reel, maximum Meets ANSI/EIA 481-2 Carrier Tape Standards User Feed Direction Orientation of Component Inside Pocket ©2001 Bel Fuse Inc. Specifications subject to change without notice. 08.01 CORPORATE FAR EAST EUROPE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com page 2