BOARDCOM BCM3341_05

BCM3341
®
ADVANCED TWO-CHANNEL VOIP COPROCESSOR
SUMMARY OF BENEFITS
FEATURES
• The BCM3341 VoIP coprocessor provides a seamless interface
• Highest level of integration dramatically simplifies system
to Broadcom’s PacketCable™ compliant cable modem devices,
enabling the industry’s lowest cost, modular VoIP cable modem
solution.
The
BCM3341 integrates:
•
• High-performance 266 DMIPS DSP
• FlexiVoice™ dual world linecard programmable codec
• Internal memory to support G.711 + 1 complex vocoder (2 lines
of either/or simultaneously)
• Memory expansion bus to support enhanced DSP features
• Vocoder Support:
- ITU G.7xx narrow, wideband, and complex vocoders
- Enhanced BroadVoice16™ and BroadVoice32™
- iLBC (internet Low Bitrate Codec)
• G.168 (2000) compliant echo cancellor
• DTMF/MF detection/relay and T.38 fax relay
• HVG circuit switch mode controller for hi/low battery
generation
• Battery sensing and monitoring inputs
• Extensive on-chip power management
• Single 3.3V power supply
• 0°C–70°C operation
•
•
•
•
design, lowers part count, and reduces system cost
• Integrated memory
• Battery sensing eliminates expensive dual switching power
controller
Enhanced reliability of voice services through powerful DSP
engine and voice algorithms deployed in millions of ports
worldwide.
Enhances voice quality through advanced system features
• Patented PacketSync™ minimizes VoIP packet delays
• Power management engine reduces overall consumption
• Accepts DOCSIS® system clock reference for slip free
synchronization
Seamless interface to additional Broadcom silicon
• BCM3349 low-cost VoIP cable modem or cable gateway
Part of a comprehensive system solution including:
• Low-cost reference design with extensive documentation
• Comprehensive CablexChange® software
- Certifiable PacketCable implementation
- SIP, MGCP, H.323 call control applications
- Extensive G.7xx, BV16, BV32, iLBC vocoder support
Two-Channel VoIP Cable Modem
SDRAM
Silicon
Tuner
USB 1.1
BCM3349
High Performance
Single Chip
DOCSIS/EuroDOCSIS 2.0
Cable Modem
10/100 Ethernet
HI Bat
Low Bat
CLK
Flash
Wireless (optional)
BCM3341
Dual Line
VoIP
PS
Dual
SLICS
OVERVIEW
JTAG
DSP
Inteface
SRAM
Interface
JTAG
HVG Control
HVG
Controller
3.3 V
1.8 V
Converter
DPI
DSP Port
Interface
BCM3341
133-MHz
266-DMIPS DSP
Program
SRAM
Grant Sync
Grant_Syncn
Data SRAM
Clock
Generation
Module
Reference In
Hook detect
PCM
HWY
ADM
PCM HWY
Timers
APM
4-wire
Differential
Audio
Interrupt
Control
GPIO
2 ch
SLIC Control
GPIO
INT/GPIO
PB Bridge
MPI/
SPI
DSP/ISN
Interface
The BCM3341 offers the industry a highly integrated, cost effective
approach to developing voice cable modem solutions for the delivery of
primary or secondary line telephony. The BCM3341 provides a seamless
interface to the BCM3349 single chip DOCSIS/EuroDOCSIS™ 2.0
cable modem.
In conjunction with the CablexChange software suite, the BCM3341
enables a leading performance, full featured voice cable modem solution
that supports a wide range of protocols, vocoders, and other software
features to be implemented in a single firmware image, reducing
software complexity and flash storage requirements.
Integrated battery supply sensing, SRAM, system reference clock inputs,
and codecs simplify design and significantly reduce system bill of
materials for lower total system cost and improved time to market.
DSP/PB
Interface
External
SLAC
Control
• Grant synchronization engine: A voice packetization scheduler that
synchronizes the voice packets with the DOCSIS grant slots,
potentially saving 10–20 ms of VoIP packet delay, providing higher
voice quality.
• Integrated DOCSIS system clock synchronization provides clock
synchronization in the entire voice path for a slip free voice.
(CODEC<>DSP<>DOCSISMAC<>DOCSIS CMTS) Solutions
without such synchronization incur voice packet slips that lower the
quality of voice calls.
• Up to 128k x 8k or 64k x 16k memory expansion capabilities for
additional DSP features such as T.38 fax relay or additional
simultaneous vocoders.
Key modules integrated into the BCM3341 include:
• PCM IOM2 interface for connecting external devices supporting
applications such as DECT wireless handsets.
• 260-DMIPS VoIP DSP with patented PacketSync supports two
primary lines of compressed voice packets plus T.38 fax relay. It can
simultaneously support two secondary lines of G.711 for various
class of service such as three way calling and caller ID.
To design a two-channel voice cable modem, when used with BCM3349
DOCSIS modem and CablexChange software, the BCM3341 completes
a cost effective, high performance world wide solution.
• Integrated two-line FlexiVoice voice codec with individual line
programmable filter coefficients, providing optimum performance
for voice, modem, and fax applications.
Broadcom®, the pulse logo, Connecting everything®, the Connecting everything logo, FlexiVoice™,
and CablexChange® are among the trademarks of Broadcom Corporation and/or its affiliates in the
United States, certain other countries and/or the EU. Any other trademarks or trade names mentioned are
the property of their respective owners.
®
BROADCOM CORPORATION
16215 Alton Parkway, P.O. Box 57013
Irvine, California 92619-7013
© 2005 by BROADCOM CORPORATION. All rights reserved.
3341-PB04-R
10/21/05
Phone: 949-450-8700
Fax: 949-450-8710
E-mail: [email protected]
Web: www.broadcom.com