BCM5703 ® 10/100/1000BASE-T CONTROLLER WITH INTEGRATED TRANSCEIVER SUMMARY OF BENEFITS FEATURES • Single-chip solution for LAN on Motherboard (LOM) and • • • • network interface card (NIC) applications • Integrated 10BASE-T/100BASE-TX/1000BASE-T transceivers • 10/100/1000 triple-speed MAC • Host interfaces - PCI v2.2—32/64 bits, 33/66 MHz - PCI-X v1.0—64 bits, 66/100/133 MHz • Ultra-deep 96-KB on-chip packet buffer • Dual high-speed RISC cores with 16-KB caches - Programmable, in-line packet classification • SMBus 2.0 controller • On-chip power circuit controller and Wake on LAN (WOL) power switching circuit Performance features: • TCP, IP, UDP checksum • TCP segmentation • CPU task offload • Adaptive interrupts • Ultra-deep 96-KB packet buffer Robust manageability: • PXE 2.0 remote boot • Alert Standard Format—ASF 1.0 support • Wake on LAN • Out-of-box (OOB) Wake on LAN • Intelligent platform management interface (IPMI), version 1.5 • Statistic gathering (SNMP MIB II, Ethernet-like MIB, Ethernet MIB) • Comprehensive diagnostic and configuration software suite • ACPI 1.1a compliant multiple power modes Advanced network features: • Priority queuing—802.1p layer 2 priority encoding; support for four priority queues • Virtual LANs—802.1q VLAN tagging; support for up to 64 VLANs • Jumbo frames (9 KB) • 802.3x flow control Advanced server features: • Link aggregation—802.3ad, GEC/FEC, Smart Load Balancing™ (supports heterogeneous teams) • Heterogeneous, mixed-speed failover • PCI Hot-Plug support Low-power, 0.13-um CMOS design • • 400-pin FBGA package • 3.3V I/Os (5V tolerant) • JTAG • Industry’s smallest 10/100/1000 MAC+PHY solution—power • • • • • • • • and space optimized for LOM and low-profile NIC applications Completely backward-compatible: • To existing 10/100 network infrastructure • To existing PCI-based desktop and server platforms Futureproof • PCI-X interface, on-chip programmable CPUs, ASF support Performance focused—optimized for throughput and CPU utilization • Adaptive interrupts • PCI-X eliminates PCI bottlenecks • Ultra-deep 96-KB packet buffer lowers CPU utilization and avoids PCI congestion • CPU task offloads reduces utilization level of CPU Robust and highly manageable • PXE 2.0, ACPI 1.1a, Wake on LAN, ASF 1.0, IPMI • Integrated cable testing—link quality, length, pair skew, pair polarity, pair swap Advanced features • VLAN, priority queuing, jumbo frames • RISC processors for advanced packet classification Server class reliability, availability, and performance features • Link aggregation and load balancing • Switch-dependent • 802.3ad (LACP), generic trunking (GEC/FEC) • Switch- and NIC-independent • Smart Load Balancing™—unique technology that supports heterogeneous teams, and can operate with any switch • Failover • Smart Load Balancing allows heterogeneous failover • PCI Hot Plug Low-power for zero airflow implementations • 0.13-um CMOS design • Advanced power management Space savings for LOM • 400-pin FBGA package • No external memory • Integrated power circuitry OVERVIEW 10/100/1000 MAC RX Buffer Memory Memory Controller 10/100/1000 PHY TX Dual Processor PCI/PCI-X PLL LED Control LED Signals PCI/PCI-X Bus 32-KB Memory SMBus EEPROM Control PLL PCI Clk SMB Interface EEPROM Interface The BCM5703 is a fully integrated 10/100/1000BASE-T Gigabit Ethernet media access control and physical layer transceiver solution for high performance network applications. The BCM5703 is a highly integrated solution combining a triple-speed, IEEE 802.3 compliant media access controller (MAC), PCI and PCI-X bus interfaces, an onchip buffer memory, and an integrated physical layer transceiver in a single device. The BCM5703 is fabricated in a low-voltage, 0.13-µm CMOS process providing a low-power system solution. The BCM5703 provides a complete single-chip Gigabit Ethernet NIC or LOM solution. The BCM5703 includes a 10/100/1000-Mbps Ethernet MAC with full/ half-duplex capability at all speeds and a 10/100/1000 copper PHY. Support for the following 802.3 functions is featured in the MAC: VLAN tagging, layer 2 priority encoding, link aggregation, and full-duplex flow control. The device provides both PCI v2.2 and PCI-X v1.0 bus interfaces. The BCM5703 provides a large on-chip buffer memory for stand-alone operation. Dual on-chip high-performance processors enable custom frame processing features, including TCP segmentation. The transceiver is fully compatible with the IEEE 802.3 standard for auto-negotiation of speed. Additionally, several Plug and Play enhancements have been added to make the device even more userfriendly. A link quality indicator LED gives installers an instant visual indication of any issues with the wiring plant supporting operation at the desired speed, which include physical wiring defects or channel conditions, such as excessive cable length, return loss, crosstalk, echo, and noise. Broadcom’s remote cable management and diagnostics software can be used with the device to provide remote management of the cable and a first level of diagnostics and fault isolation. The BCM5703 continually monitors various channel conditions. The optional wirespeed capability allows the BCM5703 to force autonegotiation to be automatically limited by the speed that the channel can reliably support (rather than by the performance of the end equipment). Target Applications of the BCM5703 Network Interface Cards (NIC) designs Single Port 10/100/1000 BASE-T PCI 2.2 Adapters PCI-X v1.0 Adapters 1000 BASE-SX PCI 2.2 Adapters PCI-X v1.0 Adapters 1000 BASE-LX PCI 2.2 Adapters PCI-X v1.0 Adapters Dual Port 10/100/1000 BASE-T LAN on Motherboard (LOM) designs Single Port 10/100/1000 BASE-T PCI 2.2 LOM PCI-X v1.0 LOM Dual Port 10/100/1000 BASE-T PCI 2.2 LOM PCI-X v1.0 LOM Gigabit Ethernet Network Interface Cards (NICs) and LAN-on Motherboard (LOM) applications for servers and workstations. PCI 2.2 Adapters BCM5703 Software Support • Microsoft® Windows® 98, NT4.0, 2000, XP, NT64 • Linux® 2.2, 2.4 • Linux64® • NetWare® 4.x, 5.x, 6.x • PXE 2.0 Broadcom®, the pulse logo, Connecting everything®, and Smart Load Balancing™ are trademarks of Broadcom Corporation and/or its subsidiaries in the United States and certain other countries. All other trademarks mentioned are the property of their respective owners. ® BROADCOM CORPORATION 16215 Alton Parkway, P.O. Box 57013 Irvine, California 92619-7013 © 2005 by BROADCOM CORPORATION. All rights reserved. 5703-PB03-R 01/05/05 Phone: 949-450-8700 Fax: 949-450-8710 E-mail: [email protected] Web: www.broadcom.com