Automotive Transient Voltage Suppressor 6K24-G (RoHS Device) Stand-off Voltage: 24 Volts Peak Pulse Power: 6000W (10/1000μs) Features: P600 Designed for under the hood applications Plastic package has underwriters laboratory Flammability classification 94V-0 Exclusive patented PAR® oxide passivated chip construction Low incremental surge resistance Ideally suited for automotive “load dump” applications High temp. soldering guaranteed: 300ºC/10 seconds, 0.375" (9.5mm) lead length, 5lbs. (2.3kg) tension 1.0(25.4) MIN. 0.360 (9.1) 0.340 (8.6) 0.360 (9.1) 0.340 (8.6) Mechanical Data: 0.052 (1.32) 0.048 (1.22) Case: Molded plastic body over nitride passivated die Terminals: Axial leads solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes positive end (cathode) Weight: 0.07oz., 2.1g Mounting Position: Any 1.0(25.4) MIN. Dimensions in inches and (millimeters) Maximum Ratings and Thermal Characteristics (TA=25ºC unless otherwise noted) Parameter Symbol Limit Unit waveform(1) PPPM 6000 W Peak pulse power dissipation w/ 10μs/50ms waveform(2) PPPM 2000 W PM(AV) 6.5 W Max. working stand-off voltage VWM 24 V Peak forward surge current, 8.3ms single half sine-wave(3) IFSM 400 A TJ, TSTG -65 to +185 ºC 1.0 50 26.7 32.6 29.6 36.7 40 45 1.8 μA Peak pulse power dissipation w/ 10/1000 μs Steady state power dissipation lead length 0.375” (9.5mm), TL = 85ºC (6) Operating junction and storage temperature range Electrical Characteristics (TA=25ºC unless otherwise noted) Max. DC reverse leakage current at Vwm = 24V Reverse Breakdown Voltage at 100mA TA = 25ºC TA = 150ºC TA = 25ºC min. TA = 25ºC max. TA = 150ºC min. TA = 150ºC max. Max. clamping voltage TA = 25ºC at Ipp = 90A (4) TA = 150ºC Max. instantaneous forward voltage at 100A(5) Note: (1) Non-repetitive current pulse, per Fig. 2, with a 10/1000μs waveform (2) Non-repetitive current pulse, per Fig. 5, with 10μs/50ms waveform (3) Measured on 8.3ms half sine-wave, or equivalent square wave, duty cycle = 4 pulses maximum ID V(BR) VC VF V V V (4) Measured on 80μs square pulse width (5) Measured on 300μs second square pulse width (6) Mounted on copper pad area of 1.6x1.6” (40x40mm) per Fig. 5 “-G” suffix designated RoHS compliant version Comchip Technology Corporation . Tel:510-657-8671 . Fax: 510-657-8921 . www.comchiptech.com Page1 Automotive Transient Voltage Suppressor 6K24-G (RoHS Device) Rating and Characteristic Curve (6KA24-G) (TA=25ºC unless otherwise noted) Fig. 1 – Peak P uls e Power R ating C urve Fig. 2 – 10/1000μs P uls e Waveform μ ° ° μ μ μ μ Fig. 3 – P uls e Derating C urve F ig. 4 -- Maximum Non-R epetitive P eak F orward S urge C urrent ° Fig. 5 – 10μs /50ms P uls e Waveform ° μ μ “-G” suffix designated RoHS compliant version Comchip Technology Corporation . Tel:510-657-8671 . Fax: 510-657-8921 . www.comchiptech.com Page2