6KA24 TRANSIENT SUPPRESSOR PREMIUM AUTOMOTIVE TRANSIENT VOLTAGE SUPPRESSOR ♦ Designed for under the hood applications ♦ Plastic package has Underwriters Laboratories Flammability Classification 94V-0 ♦ Exclusive patented PAR™ oxide passivated chip construction ♦ 6000W peak pulse power capability with a 10/1000µs waveform ♦ 2000W peak pulse power capability with a 10µs/50ms waveform ♦ Low incremental surge resistance ♦ Ideally suited for automotive “load dump” applications ♦ High temperature soldering guaranteed: 300°C/10 seconds 0.375” (9.5mm) lead lengths, 5lbs (2.3kg) tension N P A T E 1.0 (25.4) MIN. 0.360 (9.1) 0.340 (8.6) 0.360 (9.1) 0.340 (8.6) 0.052 (1.32) 1.0 (25.4) MIN. 0.048 (1.22) DIA. Peak Pulse Power - 6000 Watts FEATURES Case Style P600 T E D * Stand-off Voltage - 24 Volts MECHANICAL DATA Case: Molded plastic body over nitride passivated die Terminals: Axial leads solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes positive end (cathode) Mounting Position: Any Weight: 0.07 ounce, 2.1 grams Dimensions in inches and (millimeters) * Patent #’s 4,980,315 5,166,769 5,278,094 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°ambient temperature unless otherwise specified. RATINGS SYMBOL VALUE UNITS Peak pulse power dissipation with a 10/1000µs waveform (NOTE 1) PPPM 6000 Watts Peak pulse power dissipation with a 10µs/50ms waveform (NOTE 2) PPPM 2000 Watts Steady state power dissipation, (NOTE 6) lead lengths 0.375" (9.5mm), TL=85°C PM(AV) 5.0 Watts IFSM 400 Amps ID 1.0 50.0 µA V(BR) 26.7 32.6 29.7 36.7 Volts Vc 40.0 45.0 Volts VF 1.8 Volts TJ, TSTG -65 to +185 °C Peak forward surge current, 8.3ms single half sine-wave on rated load (JEDEC Method) (NOTE 3) Maximum DC reverse leakage current at VWM=24V TA=25°C TA=150°C Reverse Breakdown Voltage at 100mA TA=25°C minimum TA=25°C maximum TA=150°C minimum TA=150°C maximum Maximum clamping voltage at lPP=90A (NOTE 4) TA=25°C TA=150°C Maximum instantaneous forward voltage at 100A (NOTE 5) Operating junction and storage temperature range NOTES: (1) Non-repetitive current pulse, per Fig. 2, with a 10/1000µs waveform (2) Non-repetitive current pulse, per Fig. 5, with a 10µs/50ms waveform (3) Measured on 8.3ms half sine-wave, or equivalent square wave, duty cycle=4 pulses maximum (4) Measured on 80µs square pulse width (5) Measured on 300µs second square pulse width (6) Mounted on copper pad area of 0.8 x 8.0” (20 x 20mm) per Fig. 5 1/25/99 RATINGS AND CHARACTERISTIC CURVES 6KA24 FIG. 1 - PEAK PULSE POWER RATING CURVE FIG. 2 - 10/1000µs PULSE WAVEFORM 150 IPPM, PEAK PULSE CURRENT % IPP PPPM, PEAK PULSE POWER, kw 1,000 NON-REPETITIVE PULSE WAVEFORM SHOWN in FIG. 3 TA=25°C 100 10 1 0.1 100ns 10µsec 100µsec 1ms 1µs tr=10µsec. PEAK VALUE IPPM 100 PULSE WIDTH (td) is DEFINED as the POINT WHERE the PEAK CURRENT DECAYS to 50% of IPP HALF VALUE - IPP 2 50 10/1000µsec. WAVEFORM as DEFINED by R.E.A. td 0 0 1 2 3 4 t, TIME, ms 10ms 100ms td, PULSE WIDTH, sec. FIG. 4 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT IFSM, PEAK FORWARD SURGE CURRENT, AMPERES FIG. 3 - PULSE DERATING CURVE PEAK PULSE POWER (PPP) OR CURRENT (IPP) DERATING IN PERCENTAGE, % 100 PEAK POWER (SINGLE PULSE) 80 60 AVERAGE POWER 40 20 0 25 50 75 100 125 150 175 TL, LEAD TEMPERATURE,°C FIG. 5 - 50µs/50ms PULSE WAVEFORM IPPM, PEAK PULSE CURRENT, % IPP 150 tr=10µsec. PEAK VALUE IPPM 100 TA=25°C PULSE WIDTH (td) is DEFINED as the POINT WHERE the PEAK CURRENT DECAYS to 50% of IPP HALF VALUE - IPP 2 50 10µs / 50ms WAVEFORM td 0 0 25 50 75 100 125 150 175 200 t, TIME, ms TJ=TJ max. 8.3ms SINGLE HALF SINE WAVE (JEDEC Method) 350 300 250 200 150 100 1 10 NUMBER OF CYCLES AT 60 Hz LEAD LENGTH=0.375” (9.5mm) 0 400 100