Cree® 5-mm Oval LED Model # LO566TBG4-60G-A1 Data Sheet 60-degree oval LED lamp in cyan color with tinted, diffused lens and stopper Applications • • Variable-Message Signs Message Boards Absolute Maximum Ratings (TA = 25°C) Items Symbol Absolute Maximum Rating Unit IF 25 mA IFP 100 mA Reverse Voltage VR 5 V Power Dissipation PD 100 mW Operation Temperature Topr -40 ~ +95 °C Storage Temperature Tstg -40 ~ +100 °C Lead Soldering Temperature Tsol Forward Current Peak Forward Current Note Max. 260°C for 3 sec. max. (3 mm from the base of the epoxy bulb) Note: Pulse width ≤0.1 msec, duty ≤1/10. Typical Electrical & Optical Characteristics (TA = 25°C) Characteristics Symbol Condition Unit Forward Voltage VF IF = 20 mA V Forward Voltage VF IF = 1.0 μA V Reverse Current IR VR = 5 V μA Dominant Wavelength λD IF = 20 mA nm 500 505 1520 2400 Luminous Intensity D-CT098.000 Data Sheet: CL 50% Power Angle Minimum Typical Maximum 3.4 4.0 1.7 2.5 100 IV IF = 20 mA mcd 2θ½H-H IF = 20 mA deg 60 2θ½V-V IF = 20 mA deg 35 Subject to change without notice. www.cree.com/ledlamps 515 Standard Bins for LO566TBG4-60G-A1 (IF = 20 mA) Lamps are sorted to luminous intensity (IV) and dominant wavelength (λD) bins shown. Orders for LO566TBG4-60G-A1 may be filled with any or all bins contained as below. All luminous intensity (IV) and dominant wavelength (λD) values shown and specified are at IF = 20 mA. Luminous Intensity (IV) X3 X4 X5 X or above 4180 mcd W 3000 mcd V 2130 mcd U 1520 mcd 500 nm 505 nm 510 nm 515 nm Dominant Wavelength (λD) Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Pb content <1000 ppm. 3. Tolerance of measurement of luminous intensity is ±15%. 4. Tolerance of measurement of dominant wavelength is ±1 nm. 5. Tolerance of measurement of VF is ±0.05 V. 6. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” document. 7. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 8. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT098.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Document No. SPE/LO566TBG4-60G-A1 Rev. No. 03 Graphs Graphs Items Signatures Date Prepared by LiuZM 2006-04-07 Rev. No Checked by MaJF 2006-04-07 02 2005-12-08 Release. WD add X5, IV(typ)2200 to 2400mcd. Approved by David 2006-04-07 03 2006-04-07 Cancel VF bin. FCN# Revision History Date Change Description FCN20060099 Data is subject to change without prior notice; please refer to COTCO Website for the latest version. Copyright@2002 Cotco International Ltd. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT098.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Mechanical Dimensions Document No. SPE/LO566TBG4-60G-A1 Rev.mm No.unless otherwise 03 noted. All dimensions are in mm. Tolerance is ±0.25 An epoxy meniscus may extend about 1.5 mm down the leads. Dimension Drawing Burr around bottom of epoxy may be 0.5 mm max. C te maximum Rating Unit 25 mA 100 mA 5 V 100 mW 0 ~ +95 °C 0 ~ +100 °C 60°C for 3 sec Max. Notes the base of the epoxy bulb) RoHS Compliance tics ( The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Direc25°C) on the restriction of the use of certain hazardous substances in electrical and electronic equipment T a =2002/95/EC tive (RoHS), as amended through April 21, 2006. Vision Advisory Claim Condition Min. not to stare atTyp. Unitcan damage the eye. Users should be cautioned the light of this LED Max. product. The bright light IF = 20mA --- 3.4 4.0 V Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. IF = 1.0ȝA 1.7 CLD-CT098.000 --- 2.5 V Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Standard/Custom 0: Standard C: Custom VF 0: Full forward voltage distribution 1~9, A~Z . . . : special request * Wd/Color 1: Full-color distribution 2~9, A~Z . . . : special request * aaaaaaaaa-aaa-aa- x x x x x IV 0: Full luminous intensity distribution 1~9, A~Z . . . : special request * Packing type 0: Standard = Bulk pack 1~9, A~Z . . . : special request * Product P/N * Contact your Cree sales representative for ordering information. Standard Available Kits* Kit Number Description LO566TBG4-60G-A1-00001 5mm Oval 60 Bluish Green 505nm, FULL RANK, Bulk Pack LO566TBG4-60G-A1-00002 5mm Oval 60 Bluish Green 505nm, X3, X4, Bulk Pack * Please contact your Cree representative about the availability of non-standard kits. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT098.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps