CVP-140 Series 14Pin DIP, 3.3V & 5V, PECL Frequency Range: Frequency Pulling: Differential PECL Voltage Controlled Crystal Oscillator e Fre ad HS t e L Ro plian m Co 15MHz to 175MHz (CVP-140) ±50ppm Min, ±100ppm Max (CVP-141) ±75ppm Min, ±150ppm Max (CVP-142) ±100ppm Min, ±200ppm Max (CVP-143) ±200ppm Min ±20ppm @ 0°C to 70°C Frequency Stability: (inclusive of all conditions) 0°C to 70°C -55°C to 120°C 5V ± 0.5V 3.3V ± 0.3V 2.5V ± 2.0V Control Voltage: 1.65V ± 1.65V 88mA Typical Input Current: Differential PECL Output: 45/55% Max @ 50% Vdd Symmetry: 350ps Max @ 20% to 80% Vdd Rise/Fall Time: ± 10% Max Linearity: Logic: Terminated to Vdd-2V into 50 ohms "0" = Vcc-1.85V Min, Vcc-1.62V Max Logic "0" "1" = Vcc-1.02V Min, Vcc-0.81V Max Logic "1" 200ns Max Disable Time 1ms Typ., 2ms Max Start-up Time 0.5psec Typ., 1psec RMS Max Phase Jitter: 12KHz to 80MHz <3ppm 1st/yr, <1ppm every year thereafter Aging: Temperature Range: Storage: Input Voltage: 0.600 (15.24) "A" "B" 0.200 0.300 (5.08) (7.62) 0.820 (20.83) 1 2 0.300 (7.62) 0.260 (6.60) 0.750 (19.05) CRYSTEK Frequency Part Number Date Code Designed to meet drop in replacement requirements for 3.3V & 5V Differential PECL applications. The CVP-140 Series supports three pullability configurations. Available in two 14 Pin DIP configurations. Standard can height is .300" with low profile .200" option available. 5 7 Pin out "C" Bottom View 14 9 8 0.100 (2.54) repeat 0.450 (11.43) 0.520 (13.21) 0.600 (15.24) "A" "B" 0.200 0.300 (5.08) (7.62) 7 1 0.300 (7.62) 0.260 (6.60) Bottom View 14 Pin out "D" 9 8 0.100 (2.54) Pad 1 2 5 7 8 9 14 Pin Option: Connection Volt Cont. Volt Cont. N/C N/C GND GND OUT OUT COUT COUT Vdd Vdd "C" "D" Environmental Specifications: Shock: Vibration: Humidity: 1000 Gs, 0.35 ms, 1/2 sine wave, 3 shocks in each plane 10 ~ 2,000 Hz of 06" d.a or 20 Gs, whichever is less Resistant to 85° R.H. at 85° C Mechanical Specifications Leak: In accordance with Mil-Std-883, Method 1014, Cond 1A Pins: Kovar, with gold over nickel Bend Test: Will withstand two bends of 90° from reference Header: Steel with gold over nickel (package "C" only) Case: Stainless steel Marking: Epoxy ink or engraved Resistance to Solvents: MIL-STD 202, Method 215 Crystek Part Number Guide CVP-14? ? ?-155.520 #1 #2 #3 #4 #5 #1 CVPL=3.3V, CVP=5V #2 Pull 14? 0=(50~100), 141=(75~150), 142=(100~200), 142=(200+) #3 Package Height (A) or ((B) Standard) #4 Pin out configuration (C) or (D) #3 Frequency in MHz: 3 or 6 decimal places Example: CVP-141AC-155.520 = 5V, 45/55, 0/70°C, 20ppm, 50~100ppm Pullability 0.200" Height, 7 pins, 155.520 MHz Specifications subject to change without notice. TD-030707 Rev. C