CCPD-033 Model 5X7 mm SMD, 3.3V, LVPECL Frequency Range: Frequency Stability: Temperature Range: (Option M) (Option X) Storage: Input Voltage: Input Current: Output: Symmetry: Rise/Fall Time: Logic: Terminated to Vdd-2V Temp. 0°C to 85°C Temp. -40°C to 0°C Disable Time Start-up Time 12KHz to 80MHz 10Hz 100Hz 1KHz 10KHz 100KHz~100MHz Phase Jitter: Phase Noise: Aging: 77.760MHz to 161.1328MHz ±20ppm to ±100ppm 0°C to 70°C -20°C to 70°C -40°C to 85°C -55°C to 120°C 3.3V ± 0.3V 55mA Typ, 88mA Max Differential LVPECL 45/55% Max @ 50% Vdd 1ns Max @ 20% to 80% Vdd into 50 ohms "0" = 1.490 Min, 1.680 Max "1" = 2.275 Min, 2.420 Max "0" = 1.470 Min, 1.745 Max "1" = 2.215 Min, 2.420 Max 200ns Max 1mSec Typ., 2mSec Max 0.5 psec Typ., 1ps RMS Max -65dBc Typical -98dBc Typical -125dBc Typical -140dBc Typical -145dBc Typical <3ppm 1st/yr, <1ppm every year thereafter .203 (5.15) Designed to meet today's requirements for 3.3V Complementary LVPECL applications. The CCPD-033 uses a high Q crystal providing very low jitter and phase noise for demanding applications. Available on 16mm tape and reel in quantities of 1K. SUGGESTED PAD LAYOUT Dimensions inches (mm) All dimensions are Max unless otherwise specified. .283 (7.20) P/N Freq DC Differential LVPECL Clock Oscillator ee Fr ad HS t e L Ro plian m Co .055 ±.003 (1.40 ±.08) .075 (1.80) #1 #2 #3 #6 #5 #4 .071 SQ (1.80) .148 (3.75) .055 ±.003 (1.40 ±.08) .200 ±.005 (5.08 ±.13) Denotes pad 1 .200 (5.08) Bypass Capacitor Recommended TEMPERATURE RECOMMENDED REFLOW SOLDERING PROFILE Ramp-Up 3°C/Sec Max. 260°C Crystek Part Number Guide Critical Temperature Zone Ramp-Down 6°C/Sec. 217°C CCPD-033 X - 25 - 155.520 #1 200°C #2 #3 #4 #5 Stability Indicator: 150°C Preheat 180 Secs. Max. 8 Minutes Max. #1 Crystek 5x7 SMD PECL Osc. #2 Model 033 = 3.3V #3 Temp. Range: Blank = 0/70°C, M= -20/70°C, X= -40/85°C #4 Stability: (see Table 1) #5 Frequency in MHz: 3 or 6 decimal places 90 Secs. Max. Example: CCPD-033X-25-155.520 = 3.3V, 45/55, -40/85°C, 25ppm, 155.520 MHz 260°C for 10 Secs. Max. NOTE: Reflow Profile with 240°C peak also acceptable. Pad Connection 1 2 3 4 5 6 E/D N/C GND OUT COUT Vdd Table 2 Blank (std) ± 100ppm 50 ± 50ppm 25 ± 25ppm 20 ** ± 20ppm ** only available 0/70°C Tri-State Function E/D pin Output pin Open "1" level 0.7V Min "0" level 0.3V Max Active Active High Z Mechanical: Shock: Solderability: Vibration: Solvent Resistance: Resistance to Soldering Heat: Environmental: Thermal Shock: Moisture Resistance: MIL-STD-883, MIL-STD-883, MIL-STD-883, MIL-STD-202, MIL-STD-202, Table 1 Method 2002, Condition B Method 2003 Method 2007, Condition A Method 215 Method 210, Condition I or J MIL-STD-883, Method 1011, Condition A MIL-STD-883, Method 1004 Table 3 Specifications subject to change without notice. TD-020904 Rev.K