• VS-60-12 Metal Enclosed Switching Power Supply Features ·Universal AC input/ Full range ·Short circuit, overload, overvoltage protected ·Cooling by free air convection ·100% full load burn-in test ·Fixed switching frequency at 50KHz ·2 year warranty DC output voltage Output V. tolerance Output rated current Output current range Ripple & noise Line regulation Load regulation DC output power Efficiency DC voltage adj. Input voltage range AC current Inrush current Leakage current Overload protection Over voltage protection Over temp. protection Temperature coefficient Set up, rise, hold up time Vibration Withstand voltage Isolation resistance Working temp., humidity Storage temp., humidity Dimensions Weight Safety standards EMC standards Notes: 12V ±1% 5A 0-5A 120mVp-p ±0.5% ±0.5% 60W 76% ±10% rated output voltage 85~264VAC 47~63Hz; 120~370VDC 2A/115V 1A/230V cold start 30A/115V 60A/230V <3.5mA/240VAC 105%~150% type: Hiccup mode, recovers automatically after fault condition is removed 115%~135% --±0.03% / °C (0~50°C) 800ms, 50ms, 10ms / 115VAC 300ms, 50ms, 80ms / 230VAC 10~500Hz, 2G 10min./1cycle (1 hour each axes) I/P-O/P: 3KVAC, I/P-FG: 1.5KVAC, O/P-FG: 0.5KVAC, for 1 min. I/P-O/P, I/P-FG, O/P-FG:500VDC / 100M Ohms min. -10°C~+60% (refer to output derating curve), 20%-90% RH -20ºC~+85ºC, 10%~95% RH 6.26x3.82x1.50 inches (159x97x38 mm) 1.21 lbs (0.55 Kg) UL1012, UL1950, TUV EN60950 APPROVED CISPR22 (EN55022) CLASS B, EN61000-3-2,3; EN61000-4-2,3,4,5,6,8,11 ; ENV50204 1. All parameters are specified at 230VAC input, rated load, 25°C 70% RH ambient 2. Tolerance includes set up tolerance, line regulation, load regulation 3. Ripple & noise are measured at 20MHz by using a 12” twisted pair terminated with a 0.1uF & 47 uF capacitor 4. Line regulation is measured from low line to high line at rated load 5, Load regulation is measure from 0% to 100% rated load *V-Infinity reserves the right to make changes to its products or to discontinue any product or service without notice, and to advise customers to verify the most up-to-date product information before placing orders. V-Infinity assumes no liability or responsibility for customer’s applications using V-Infinity products other than repair or replacing (at V-I’s option) V-Infinity products not meeting V-I’s published specifications. Nothing will be covered outside of standard product warranty. V-Infinity, LLC, 9615 SW Allen Blvd Suite 103, Beaverton, OR 97005 www.v-infinity.com 1-866-372-1258 • VS-60-12 Metal Enclosed Switching Power Supply Block Diagram Output Derating Static Characteristics Dimensions (mm) V-Infinity, LLC, 9615 SW Allen Blvd Suite 103, Beaverton, OR 97005 www.v-infinity.com 1-866-372-1258