CURRENT 3.0 Amperes VOLTAGE 50 to 800 Volts RS3A THRU RS3K Features · For surface mounted applications in order optimize board space · Low profile package · Built-in strain relief, ideal for automated placement · Fast switching speed · Plastic package has Unerwrites Laboratory Flammability Classification 94V-0 · Low forward voltage drop · Glass passivated junction · High temperature soldering guaranteed : 250℃/10 seconds, at terminals DO-214AB (SMC) 0.245(6.22) 0.220(5.59) 0.124(3.15) 0.108(2.75) 0.280(7.11) 0.260(6.60) 0.012(0.31) 0.006(0.15) 0.103(2.62) 0.079(2.00) Mechanical Data · Case : JEDEC SMC(DO-214AB) molded plastic body · Terminals : Plated axial lead solderable per MIL-STD-750, method 2026 · Polarity : Color band denotes cathode end · Weight : 0.007ounce, 0.25 gram 0.008(0.203) MAX. 0.050(1.27) 0.030(0.76) 0.320(8.13) 0.305(7.75) Dimensions in inches and (millimeters) Maximum Ratings And Electrical Characteristics (Ratings at 25℃ ambient temperature unless otherwise specified, Single phase, half wave 60Hz, resistive or inductive load. For capacitive load, derate by 20%) Symbols RS3A RS3B RS3D RS3G RS3J RS3K Units Maximum recurrent peak reverse voltage VRRM 50 100 200 400 600 800 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 Volts Maximum DC blocking voltage VDC 50 100 200 400 600 800 Volts Maximum average forward rectified current at TL=75℃ I(AV) 3.0 Amps Peak forward surge current 8.3ms half sing wave superimposed on rated load (JEDEC method) TL=75℃ IFSM 100.0 Amps Maximum instantaneous forward voltage at 1.5A VF 1.30 Volts Maximum reverse current at rated voltage TA=25℃ TA=125℃ Maximum reverse recovery time (Note 1) Typical thermal resistance (Note 3) Typical junction capacitance (Note 2) Operating unction and storage temperature range 10.0 IR Trr μA 250 150 250 500 ns RθJL RθJA 15.0 50.0 ℃/W CJ 60.0 pF TJ TSTG -55 to +150 Notes: (1) Test conditions: IF=0.5A, IR=1.0A, Irr=0.25A. (2) Measured at 1MHz and applied reverse voltage of 4.0 Volts. (3) Thermal resistance from junction to ambient and from junction to lead mounted on PCB mounted on 0.3×0.3"(8.0×8.0mm) copper opad areas. ℃ RATINGS AND CHARACTERISTIC CURVES RS3A THRU RS3K FIG.2-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT FIG.1-FORWARD CURRENT DERATING CURVE PEAK FORWARD SURGE CURRENT(AMPERES) AVERAGE FORWARD CURRENT (A) 3.0 RESISTIVE OR INDUCTIVE LOAD 2.0 1.0 P.C.B.MOUNTED ON 0.3X0.3"(8.0X8.0mm) COPPER PAD AREAS 0 0 50 100 150 200 125 75 50 25 LEAD TEMPERATURE (℃) 0 1 2 4 6 8 10 20 40 60 NUMBER OF CYCLES AT 60Hz FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.5-TYPICAL REVERSE CHARACTERISTICS 100 100 TJ=125℃ INSTANTANEOUS REVERSE CURRENT MICROAMPERES INSTANTANEOUS FORWARD CURRENT(AMPERES) TL=75℃ 8.3m SINGLE HALF SINE WAVE (JEDEC Method) 100 TJ=25℃ 10 TJ=40℃ 1 PULSE WIDTH=300ms 1% DUTY CYCLE 0.1 0.4 0.6 0.8 1.0 1.2 1.4 1.6 TJ=125℃ 10 1 TJ=75℃ TJ=25℃ 0.1 1.8 INSTANTANEOUS FORWARD VOLTAGE (VOLTS) FIG.6-TYPICAL TRANSIENT THERMAL IMPEDANCE 0.01 0 TRANSIENT THERMAL IMPEDANCE (℃/W) 100 20 40 60 80 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) 10 1 MOUNTED ON 0.20X0.27" (5X7mm) COPPER PAD AREA 0.1 0.01 0.1 1 t,PULSE DURATION,sec 10 100 100 100